Quantum acousto-optic transducer for superconducting qubits

We propose theory for a reversible quantum transducer connecting superconducting qubits and optical photons using acoustic waves in piezoelectrics. The proposed device consists of an integrated acousto-optic resonator that utilizes stimulated Brillouin scattering for phonon-photon conversion and piezoelectric effect for coupling of phonons to qubits. We evaluate the phonon-photon coupling rate and show that the required power of the optical pump as well as the other device parameters providing full and faithful quantum conversion is feasible for implementation with the state-of-the-art integrated acousto-optics

Period multiplication in a parametrically driven superconducting resonator

We report on the experimental observation of period multiplication in parametrically driven tunable superconducting resonators. We modulate the magnetic flux through a superconducting quantum interference device, attached to a quarter-wavelength resonator, with frequencies $n\omega$ close to multiples, $n=2,\,3,\,4,\,5$, of the resonator fundamental mode and observe intense output radiation at $\omega$. The output field manifests $n$-fold degeneracy with respect to the phase, the $n$ states are phase shifted by $2\pi/n$ with respect to each other. Our demonstration verifies the theoretical prediction by Guo et al. in PRL 111, 205303 (2013), and paves the way for engineering complex macroscopic quantum cat states with microwave photons

Controlling Josephson transport by manipulation of Andreev levels in ballistic mesoscopic junctions

We discuss how to control dc Josephson current by influencing the structure and nonequilibrium population of Andreev levels via external electrostatic gates, external current injection and electromagnetic radiation. In particular we will consider the "giant" Josephson current in "long" SIS tunnel junctions and the regular and anomalous nonequilibrium Josephson currents in three terminal SNS junctions. We will briefly discuss applications to the Josephson field effect transistor (JOFET) and to the newly invented Josephson interference transistor (JOINT).Comment: 10 pages, 3 figures; contribution to a special volume of Superlattices and Microstructures journal (ed. P.F. Bagwell

Are pinholes the cause of excess current in superconducting tunnel junctions? A study of Andreev current in highly resistive junctions

In highly resistive superconducting tunnel junctions, excess subgap current is usually observed and is often attributed to microscopic "pinholes" in the tunnel barrier. We have studied the subgap current in superconductor-insulator-superconductor (SIS) and superconductor-insulator-normal-metal (SIN) junctions. In Al/AlOx/Al junctions, we observed a decrease of 2 orders of magnitude in the current upon the transition from the SIS to the SIN regime, where it then matched theory. In Al/AlOx/Cu junctions, we also observed generic features of coherent diffusive Andreev transport in a junction with a homogenous barrier. We use the quasiclassical Keldysh-Green function theory to quantify single- and two-particle tunneling and find good agreement over 2 orders of magnitude in transparency. We argue that our observations rule out pinholes as the origin of the excess current.Comment: 4 pages, 4 figure

Spectrum of Andreev Bound States in a Molecule Embedded Inside a Microwave-Excited Superconducting Junction

Non-dissipative Josephson current through nanoscale superconducting constrictions is carried by spectroscopically sharp energy states, so-called Andreev bound states. Although theoretically predicted almost 40 years ago, no direct spectroscopic evidence of these Andreev bound states exists to date. We propose a novel type of spectroscopy based on embedding a superconducting constriction, formed by a single-level molecule junction, in a microwave QED cavity environment. In the electron-dressed cavity spectrum we find a polariton excitation at twice the Andreev bound state energy, and a superconducting-phase dependent ac Stark shift of the cavity frequency. Dispersive measurement of this frequency shift can be used for Andreev bound state spectroscopy.Comment: Published version; 4+ pages, 3 figure

Multiple Andreev reflections as a transport problem in energy space

We present an approach for analyzing the dc current in voltage biased quantum superconducting junctions. By separating terms from different $n$-particle processes, we find that the $n$-particle current can be mapped on the problem of wave transport through a potential structure with $n$ barriers. We discuss the relation between resonances in such structures and the subgap structures in the current-voltage characteristics. At zero temperature we find, exactly, that only processes creating real excitations contribute to the current. Our results are valid for a general SXS-junction, where the X-region is an arbitrary non-superconducting region described by an energy-dependent transfer matrix.Comment: 11 pages, 4 figures, submitted to Superlattices and Microstructure

Energy Response and Longitudinal Shower Profiles Measured in CMS HCAL and Comparison With Geant4

The response of the CMS combined electromagnetic and hadron calorimeter to beams of pions with momenta in the range 5-300 GeV/c has been measured in the H2 test beam at CERN. The raw response with the electromagnetic compartment calibrated to electrons and the hadron compartment calibrated to 300 GeV pions may be represented by sigma = (1.2) sqrt{E} oplus (0.095) E. The fraction of energy visible in the calorimeter ranges from 0.72 at 5 GeV to 0.95 at 300 GeV, indicating a substantial nonlinearity. The intrinsic electron to hadron ratios are fit as a function of energy and found to be in the range 1.3-2.7 for the electromagnetic compartment and 1.4-1.8 for the hadronic compartment. The fits are used to correct the non-linearity of the e pi response to 5% over the entire measured range resulting in a substantially improved resolution at low energy. Longitudinal shower profile have been measured in detail and compared to Geant4 models, LHEP-3.7 and QGSP-2.8. At energies below 30 GeV, the data, LHEP and QGSP are in agreement. Above 30 GeV, LHEP gives a more accurate simulation of the longitudinal shower profile

Design, Performance and Calibration of the CMS Forward Calorimeter Wedges

We report on the test beam results and calibration methods using charged particles of the CMS Forward Calorimeter (HF). The HF calorimeter covers a large pseudorapidity region (3\l |\eta| \le 5), and is essential for large number of physics channels with missing transverse energy. It is also expected to play a prominent role in the measurement of forward tagging jets in weak boson fusion channels. The HF calorimeter is based on steel absorber with embedded fused-silica-core optical fibers where Cherenkov radiation forms the basis of signal generation. Thus, the detector is essentially sensitive only to the electromagnetic shower core and is highly non-compensating (e/h \approx 5). This feature is also manifest in narrow and relatively short showers compared to similar calorimeters based on ionization. The choice of fused-silica optical fibers as active material is dictated by its exceptional radiation hardness. The electromagnetic energy resolution is dominated by photoelectron statistics and can be expressed in the customary form as a/\sqrt{E} + b. The stochastic term a is 198% and the constant term b is 9%. The hadronic energy resolution is largely determined by the fluctuations in the neutral pion production in showers, and when it is expressed as in the electromagnetic case, a = 280% and b = 11%

Design, Performance, and Calibration of CMS Hadron-Barrel Calorimeter Wedges

Extensive measurements have been made with pions, electrons and muons on four production wedges of the Compact Muon Solenoid (CMS) hadron barrel (HB) calorimeter in the H2 beam line at CERN with particle momenta varying from 20 to 300 GeV/c. Data were taken both with and without a prototype electromagnetic lead tungstate crystal calorimeter (EB) in front of the hadron calorimeter. The time structure of the events was measured with the full chain of preproduction front-end electronics running at 34 MHz. Moving-wire radioactive source data were also collected for all scintillator layers in the HB. These measurements set the absolute calibration of the HB prior to first pp collisions to approximately 4%

Synchronization and Timing in CMS HCAL

The synchronization and timing of the hadron calorimeter (HCAL) for the Compact Muon Solenoid has been extensively studied with test beams at CERN during the period 2003-4, including runs with 40 MHz structured beam. The relative phases of the signals from different calorimeter segments are timed to 1 ns accuracy using a laser and equalized using programmable delay settings in the front-end electronics. The beam was used to verify the timing and to map out the entire range of pulse shapes over the 25 ns interval between beam crossings. These data were used to make detailed measurements of energy-dependent time slewing effects and to tune the electronics for optimal performance