Propagation and dissipation of Alfvén waves in stellar atmospheres permeated by isothermal winds

We investigate the nonlinear evolution of Alfvén waves in a radially stratified isothermal atmosphere with wind, from the atmospheric base out to the Alfvénic point. Nonlinear interactions, triggered by wave reflection due to the atmospheric gradients, are assumed to occur mainly in directions perpendicular to the mean radial magnetic field. The nonlinear coupling between waves propagating in opposite directions is modeled by a phenomenological term, containing an integral turbulent length scale, which acts as a dissipative coefficient for waves of a given frequency. Although the wind acceleration profile is not determined self-consistently one may estimate the dissipation rate inside the layer and follow the evolution of an initial frequency spectrum. Reflection of low frequency waves drives dissipation across the whole spectrum, and steeper gradients, i.e. lower coronal temperatures, enhance the dissipation rate. Moreover, when reasonable wave amplitudes are considered, waves of all frequencies damp at the same rate and the spectrum is not modified substantially during propagation. Therefore the sub-Alfvénic coronal layer acts differently when waves interact nonlinearly, no longer behaving as a frequency dependent filter once reflection-generated nonlinear interactions are included, at least within the classes of models discussed here

Non linear evolution of Alfvén wave in the solar atmosphere

We investigate the non-linear evolution of Alfvén waves in the solar atmosphere and wind, from the photosphere out to the Earth’s orbit. Photosphere and chromosphere are modeled as isothermal layers in static equilibrium, connecting across the transition region with a corona and wind. Nonlinear coupling between waves propagating in opposite directions is modeled by a phenomenological term containing an integral turbulent length scale. Spectrum modifications remain similar to what is found in a linear analysis and some characteristic features - i.e. oscillations at higher frequencies- persist despite nonlinear interactions

A turbulence-driven model for heating and acceleration of the fast wind in coronal holes

A model is presented for generation of fast solar wind in coronal holes, relying on heating that is dominated by turbulent dissipation of MHD fluctuations transported upwards in the solar atmosphere. Scale-separated transport equations include large-scale fields, transverse Alfvenic fluctuations, and a small compressive dissipation due to parallel shears near the transition region. The model accounts for proton temperature, density, wind speed, and fluctuation amplitude as observed in remote sensing and in situ satellite data.Comment: accepted for publication in ApJ

Coupling the solar surface and the corona: coronal rotation, Alfv\'en wave-driven polar plumes

The dynamical response of the solar corona to surface and sub-surface perturbations depends on the chromospheric stratification, and specifically on how efficiently these layers reflect or transmit incoming Alfv\'en waves. While it would be desirable to include the chromospheric layers in the numerical simulations used to study such phenomena, that is most often not feasible. We defined and tested a simple approximation allowing the study of coronal phenomena while taking into account a parametrised chromospheric reflectivity. We addressed the problems of the transmission of the surface rotation to the corona and that of the generation of polar plumes by Alfv\'en waves (Pinto et al., 2010, 2011). We found that a high (yet partial) effective chromospheric reflectivity is required to properly describe the angular momentum balance in the corona and the way the surface differential rotation is transmitted upwards. Alfv\'en wave-driven polar plumes maintain their properties for a wide range of values for the reflectivity, but they become bursty (and eventually disrupt) when the limit of total reflection is attained.Comment: Solar Wind 13: Proceedings of the Thirteenth International Solar Wind Conferenc

Sub-structure formation in starless cores

Motivated by recent observational searches of sub-structure in starless molecular cloud cores, we investigate the evolution of density perturbations on scales smaller than the Jeans length embedded in contracting isothermal clouds, adopting the same formalism developed for the expanding Universe and the solar wind. We find that initially small amplitude, Jeans-stable perturbations (propagating as sound waves in the absence of a magnetic field), are amplified adiabatically during the contraction, approximately conserving the wave action density, until they either become nonlinear and steepen into shocks at a time $t_{\rm nl}$, or become gravitationally unstable when the Jeans length decreases below the scale of the perturbations at a time $t_{\rm gr}$. We evaluate analytically the time $t_{\rm nl}$ at which the perturbations enter the non-linear stage using a Burgers' equation approach, and we verify numerically that this time marks the beginning of the phase of rapid dissipation of the kinetic energy of the perturbations. We then show that for typical values of the rms Mach number in molecular cloud cores, $t_{\rm nl}$ is smaller than $t_{\rm gr}$, and therefore density perturbations likely dissipate before becoming gravitational unstable. Solenoidal modes grow at a faster rate than compressible modes, and may eventually promote fragmentation through the formation of vortical structures.Comment: 8 pages, 4 figure

Quantum size effects in the low temperature layer-by-layer growth of Pb on Ge(001)

The electronic properties of thin metallic films deviate from the corresponding bulk ones when the film thickness is comparable with the wavelength of the electrons at the Fermi level due to quantum size effects (QSE). QSE are expected to affect the film morphology and structure leading to the low temperature (LT) ``electronic growth'' of metals on semiconductors. In particular, layer-by-layer growth of Pb(111) films has been reported for deposition on Ge(001) below 130 K. An extremely flat morphology is preserved throughout deposition from four up to a dozen of monolayers. These flat films are shown to be metastable and to reorganize into large clusters uncovering the first Pb layer, pseudomorphic to the substrate, already at room temperature. Indications of QSE induced structural variations of the growing films have been reported for Pb growth on Ge(001), where the apparent height of the Pb(111) monatomic step was shown to change in an oscillatory fashion by He atom scattering (HAS) during layer-by-layer growth. The extent of the structural QSE has been obtained by a comparison of the HAS data with X-ray diffraction (XRD) and reflectivity experiments. Whereas step height variations as large as 20 % have been measured by HAS reflectivity, the displacement of the atomic planes from their bulk position, as measured by XRD, has been found to mainly affect the topmost Pb layer, but with a lower extent, i.e. the QSE observed by HAS are mainly due to a perpendicular displacement of the topmost layer charge density. The effect of the variable surface relaxation on the surface vibration has been studied by inelastic HAS to measure the acoustic dispersion of the low energy phonons.Comment: 28 pages (laTex,elsart) and 13 figures (eps); updated reference

INTREPID Futures Initiative: The future of Academia and trans-disciplinary knowledge production in the urban field, 6th INTREPID Report

The idea of hosting the 5th INTREPID Action Workshop in Gagliato, Calabria (Italy), between the 20th - 27th July 2017, raised during the London Workshop with the deliberate intention to embed one of the INTREPID research explorations within ongoing initiatives of some of the Universities involved in the INTREPID COST action: in particular a participatory design workshop on Creative Towns, coordinated by the University of Westminster, with the participation of Newcastle University. Other non-cost members involved are: ILAUD, The International Laboratory of Architecture and Urban Design, the London School of Economics, the Universita’ degli Studi Mediterranea di Reggio Calabria, the Università della Calabria and a local NGO, the Academy of the Nano-science of Gagliato. The participatory workshop has been funded by the Academy of the Nano-science of Gagliato and it has been fruitfully coupled with an INTREPID Workshop. The main aim of the participatory design workshop was to explore alternative scenarios for the sustainable local development of Gagliato, a small town located in a relative marginal area of the South of Italy, engaging various local stakeholders in the scenario exercise

Study of the isotropic contribution to the analysis of photoelectron diffraction experiments at the ALOISA beamline

The angular distribution of the intensity in photoemission experiments is affected by electron diffraction patterns and by a smoothly varying ISO contribution originated by both intrumental details and physical properties of the samples. The origin of the various contributions to the ISO component has been identified since many years. Nonetheless in this work we present original developement of the ED analysis, which arises from the evolution of instrumental performance, in terms of analyzers positioning and angular resolution, as well as collimation and size of X-ray beams in third generation synchrotron sources. The analytical treatement of the instrumental factors is presented in detail for the end station of the ALOISA beamline (Trieste Synchrotron), where a wide variety of scattering geometries is available for ED experiments. We present here the basic formulae and their application to experimental data taken on the Fe/Cu3Au(001) system in order to highlight the role of the various parameters included in the distribution function. A specific model for the surface illumination has been developed as well as the overlayer thickness and surface roughness have been considered.Comment: RevTex, nine pages with five eps figures; to be published in J. Electron Spectrosc. Relat. Pheno

Do people with musculoskeletal pain differ from healthy cohorts in terms of global measures of strength? A systematic review and meta-analysis

Objective It is currently unknown if people with musculoskeletal pain display different multi-joint strength capacities than healthy cohorts. The aim was to investigate whether people with musculoskeletal pain show differences in global measures of strength in comparison to healthy cohorts. Data sources A systematic review was conducted using three databases (Medline, CINAHL and SPORTDiscus) and PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Review methods Studies involving participants with painful musculoskeletal conditions and multi-joint strength assessment measured at baseline were included. A meta-analysis was also performed to compute standardized mean differences (± 95% confidence intervals), using Hedge’s g, and examined the differences in multi-joint strength at baseline between participants with painful musculoskeletal conditions and healthy participants. Results 5043 articles were identified, of which 20 articles met the inclusion criteria and were included in the qualitative analysis. The available evidence revealed that multi-joint strength values were limited to knee osteoarthritis, fibromyalgia, chronic low back pain, and rheumatoid arthritis. Only four studies were included in the quantitative synthesis and revealed that only small differences in both chest press (g= -0.34, 95% CI [-0.64, -0.03]) and leg press (g= -0.25, 95% CI [-0.49, -0.02]) existed between adult women with fibromyalgia and active community women. Conclusion There is a paucity of multi-joint strength values in participants with musculoskeletal pain. Quantitative comparison with healthy cohorts was limited, except for those with fibromyalgia. Adult women with fibromyalgia displayed reduced multi-joint strength values in comparison to active community women