27 research outputs found
Polyethylene fiber drawing optimization
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011."June 2011." Cataloged from PDF version of thesis.Includes bibliographical references (p. 33).Polymer fiber drawing creates fibers with enhanced thermal conductivity and strength compared to bulk polymer because drawing aligns the molecular chains. I optimize the polymer fiber drawing method in order to achieve polymer fibers that are drawn to lengths exceeding 1cm and develop a method to cut and store them for future experimental purposes. With lengths exceeding 1cm, starting with lengths near 0.5mm, these fibers undergo very large tensile deformations. This ensures the fibers obtained have been ultra drawn, and the polymer chains have aligned, thus enhancing the tensile strength and thermal conductivity of the fiber. By storing these fibers, I can perform experimental measurements in the future to obtain thermal conductivity values for polyethylene fibers and notice the effect of aligning the molecular chains.by Vazrik Chiloyan.S.B
Variational approach to solving the phonon Boltzmann transport equation for analyzing nanoscale thermal transport experiments
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2018.Cataloged from PDF version of thesis.Includes bibliographical references (pages 133-140).Over time, technology has shrunk to smaller length scales, and as a result the heat transport in these systems has entered the nanoscale regime. With increasing computational speed and power consumption, there is a need to efficiently dissipate the heat generated for proper thermal management of computer chips. The ability to understand the physics of thermal transport in this regime is critical in order to model, engineer, and improve the performance of materials and devices. In the nanoscale regime, thermal transport is no longer diffusive, and the Fourier heat conduction equation, which we commonly utilize at the macroscale, fails to accurately predict heat flow at the nanoscale. We model the heat flow due to phonons (crystal lattice vibrations), the dominant heat carriers in semiconductors and dielectrics, by solving the Boltzmann transport equation (BTE) to develop an understanding of nondiffusive thermal transport and its dependence on the system geometry and material properties, such as the phonon mean free path. A variety of experimental heat transfer configurations have been established in order to achieve short time scales and small length scales in order to access the nondiffusive heat conduction regime. In this thesis, we develop a variational approach to solving the BTE, appropriate for different experimental configurations, such as transient thermal grating (TTG) and time-domain thermoreflectance (TDTR). We provide an efficient and general methodology to solving the BTE and gaining insight into the reduction of the effective thermal conductivity in the nondiffusive regime, known as classical size effects. We also extend the reconstruction procedure, which aims to utilize both modeling efforts as well as experimental measurements to back out the material properties such as phonon mean free path distributions, to provide further insight into the material properties relevant to transport. Furthermore, with the developed methodology, we aim to provide an analysis of experimental geometries with the inclusion of a thermal interface, to provide insight into the role the interface transmissivity plays in thermal transport in the nondiffusive regime. Lastly, we explore a variety of phonon source distributions that are achieved by heating a system, and show the important link between the system geometry and the distribution of phonons initiated by the heating. We show the exciting possibility that under certain nonthermal phonon distributions, it is possible to achieve enhanced thermal transport at the nanoscale, contrary to the current understanding of size effects only leading to reduced thermal conductivities at the nanoscale for thermal phonon distributions.by Vazrik Chiloyan.Ph. D
Transition from near-field thermal radiation to phonon heat conduction at sub-nanometre gaps
When the separation of two surfaces approaches sub-nanometre scale, the boundary between the two most fundamental heat transfer modes, heat conduction by phonons and radiation by photons, is blurred. Here we develop an atomistic framework based on microscopic Maxwell’s equations and lattice dynamics to describe the convergence of these heat transfer modes and the transition from one to the other. For gaps >1 nm, the predicted conductance values are in excellent agreement with the continuum theory of fluctuating electrodynamics. However, for sub-nanometre gaps we find the conductance is enhanced up to four times compared with the continuum approach, while avoiding its prediction of divergent conductance at contact. Furthermore, low-frequency acoustic phonons tunnel through the vacuum gap by coupling to evanescent electric fields, providing additional channels for energy transfer and leading to the observed enhancement. When the two surfaces are in or near contact, acoustic phonons become dominant heat carriers.United States. Dept. of Energy. Office of Basic Energy Sciences (DE-FG02-02ER45977
Enhancement and tunability of near-field radiative heat transfer mediated by surface plasmon polaritons in thin plasmonic films
The properties of thermal radiation exchange between hot and cold objects can
be strongly modified if they interact in the near field where electromagnetic
coupling occurs across gaps narrower than the dominant wavelength of thermal
radiation. Using a rigorous fluctuational electrodynamics approach, we predict
that ultra-thin films of plasmonic materials can be used to dramatically
enhance near-field heat transfer. The total spectrally integrated film-to-film
heat transfer is over an order of magnitude larger than between the same
materials in bulk form and also exceeds the levels achievable with polar
dielectrics such as SiC. We attribute this enhancement to the significant
spectral broadening of radiative heat transfer due to coupling between surface
plasmon polaritons (SPPs) on both sides of each thin film. We show that the
radiative heat flux spectrum can be further shaped by the choice of the
substrate onto which the thin film is deposited. In particular, substrates
supporting surface phonon polaritons (SPhP) strongly modify the heat flux
spectrum owing to the interactions between SPPs on thin films and SPhPs of the
substrate. The use of thin film phase change materials on polar dielectric
substrates allows for dynamic switching of the heat flux spectrum between
SPP-mediated and SPhP-mediated peaks.Comment: 25 pages, 11 figure
A Variational Approach to Extracting the Phonon Mean Free Path Distribution from the Spectral Boltzmann Transport Equation
The phonon Boltzmann transport equation (BTE) is a powerful tool for studying
non-diffusive thermal transport. Here, we develop a new universal variational
approach to solving the BTE that enables extraction of phonon mean free path
(MFP) distributions from experiments exploring non-diffusive transport. By
utilizing the known Fourier solution as a trial function, we present a direct
approach to calculating the effective thermal conductivity from the BTE. We
demonstrate this technique on the transient thermal grating (TTG) experiment,
which is a useful tool for studying non-diffusive thermal transport and probing
the mean free path (MFP) distribution of materials. We obtain a closed form
expression for a suppression function that is materials dependent, successfully
addressing the non-universality of the suppression function used in the past,
while providing a general approach to studying thermal properties in the
non-diffusive regime.Comment: 17 pages, 2 figure
Unifying first principle theoretical predictions and experimental measurements of size effects on thermal transport in SiGe alloys
In this work, we demonstrate the correspondence between first principle
calculations and experimental measurements of size effects on thermal transport
in SiGe alloys. Transient thermal grating (TTG) is used to measure the
effective thermal conductivity. The virtual crystal approximation under the
density functional theory (DFT) framework combined with impurity scattering is
used to determine the phonon properties for the exact alloy composition of the
measured samples. With these properties, classical size effects are calculated
for the experimental geometry of reflection mode TTG using the
recently-developed variational solution to the phonon Boltzmann transport
equation (BTE), which is verified against established Monte Carlo simulations.
We find agreement between theoretical predictions and experimental measurements
in the reduction of thermal conductivity (as much as 25\% of the bulk
value) across grating periods spanning one order of magnitude. This work
provides a framework for the tabletop study of size effects on thermal
transport