Optimization of Compression Molding Process Parameters for NFPC Manufacturing Using Taguchi Design of Experiment and Moldflow Analysis

This paper presents the application of Taguchi design of experiment and Autodesk Moldflow® simulation in finding the optimal processing parameters for the manufacturing of natural fiber–polymer composite products. The material used in the study is a composite of recycled thermoplastic reinforced with 10% wood fibers. For the study, four critical processing parameters, namely compression time, mold temperature, melt temperate, and pressure, were selected for optimization. Process analysis was carried out in Moldflow® utilizing a combination of process parameters based on an L9 orthogonal array. Later, the warpage output from Moldflow® simulation was converted into a signal-to-noise (S/N) ratio response, and the optimum values of each processing parameter were obtained using the smaller-the-better quality characteristic. The results show that the optimum values were 60 °C, 40 s, 210 °C, and 600 kN for the mold temperature, compression time, melt temperature, and pressure, respectively. Afterward, a confirmation test was performed to test the optimum parameters. Using analysis of variance (ANOVA), melt temperature was found to be the most significant processing parameter, followed by mold temperature, compression time, and pressure

Design of Tooling System and Identifying Crucial Processing Parameters for NFPC Manufacturing in Automotive Applications

The aim of this study was to design a tooling system for manufacturing automotive components using a natural fiber polymer composite (NFPC) material. As a case study, an automotive battery cover was selected and a compression molding tool was designed, keeping in mind the need for the simplicity of the tool and ensuring the low cost of this process. However, since the original part was injection-molded with virgin polypropene, some vital changes made in the part and tool design process were documented as a guideline to show new designers how to approach the design of parts and tools using a natural fiber polymer composite material. Additionally, the challenges faced during the manufacturing of composite parts with the new tool were also documented and solutions to these challenges were suggested for large-scale production. Finally, compressive testing was performed to evaluate the performance of the structure of the designed part and to compare the recycled polymer with NFPC material. Both wood and palm fiber composite material perform better in compression testing compared to the recycled polymer material