3 research outputs found
Recommended from our members
FLAT LIQUID CRYSTAL DIFFRACTIVE LENSES WITH VARIABLE FOCUS AND MAGNIFICATION
Non-mechanical variable lenses are important for creating compact imaging devices. Various methods employing dielectrically actuated lenses, membrane lenses, and liquid crystal lenses were previously proposed [1-4]. In This dissertation the design, fabrication, and characterization of innovative flat tunable-focus liquid crystal diffractive lenses (LCDL) are presented. LCDL employ binary Fresnel zone electrodes fabricated on Indium-Tin-Oxide using conventional micro-photolithography. The light phase can be adjusted by varying the effective refractive index of a nematic liquid crystal sandwiched between the electrodes and a reference substrate. Using a proper voltage distribution across various electrodes the focal length can be changed between several discrete values. Electrodes are shunted such that the correct phase retardation step sequence is achieved. If the number of 2πzone boundaries is increased by a factor of m the focal length is changed from f to f/m based on the digitized Fresnel zone equation: f = rm²/2mλ, where r(m) is mth zone radius, and λ is the wavelength. The chromatic aberration of the diffractive lens is addressed and corrected by adding a variable fluidic lens. These LCDL operate at very low voltage levels (±2.5V ac input), exhibit fast switching times (20-150 ms), can have large apertures (>10 mm), and small form factor, and are robust and insensitive to vibrations, gravity, and capillary effects that limit membrane and dielectrically actuated lenses. Several tests were performed on the LCDL including diffraction efficiency measurement, switching dynamics, and hybrid imaging with a refractive lens. Negative focal lengths are achieved by adjusting the voltages across electrodes. Using these lenses in combination, magnification can be changed and zoom lenses can be formed. These characteristics make LCDL a good candidate for a variety of applications including auto-focus and zoom lenses in compact imaging devices such as camera phones. A business plan centered on this technology was developed as part of the requirements for the minor in entrepreneurship from the Eller College of Management. An industrial analysis is presented in this study that involves product development, marketing, and financial analyses (Appendix I).Embargo: Release after 7/5/201
Large-aperture switchable thin diffractive lens with interleaved electrode patterns
© 2006 American Institute of Physics. The electronic version of this article is the complete one and can be found at: http://dx.doi.org/10.1063/1.2338646DOI: 10.1063/1.2338646The authors report on a high-performance large-aperture switchable diffractive lens using nematic liquid crystal that can be used as an adaptive eyewear. The odd- and even-numbered ring electrodes are separated in two layers, avoiding the gaps between the neighboring electrodes and allowing high diffraction efficiency. It is easier to avoid shorts between neighboring conductive electrodes and fabricate lenses with larger aperture and smaller feature size. With a four-level phase modulation, a 15 mm aperture, 2 dpt lens with small aberrations and diffraction efficiency of above 75% could be demonstrated with low operating voltages. The thickness of the liquid crystal is only 5 μm. The lens switching time is about 180 ms. The on and off states of the electrically controlled lens allows near and distance vision, respectively. The focusing power of the lens can be adjusted to be either positive or negative. This structure can be extended to higher-level phase modulation with even higher efficiencies