Anti-Collision Adaptations of BLE Active Scanning for Dense IoT Tracking Applications

Bluetooth low energy (BLE) is one of most promising technologies to enable the Internet-of-Things (IoT) paradigm. The BLE neighbor discovery process (NDP) based on active scanning may be the core of multiple IoT applications in which a large and varying number of users/devices/tags must be detected in a short period of time. Minimizing the discovery latency and maximizing the number of devices that can be discovered in a limited time are challenging issues due to collisions between frames sent by advertisers and scanners. The mechanism for resolution of collisions between scanners has a great impact on the achieved performance, but backoff in NDP has been poorly studied so far. This paper includes a detailed analysis of backoff in NDP, identifies and studies the factors involved in the process, reveals the limitations and problems presented by the algorithm suggested by the specifications and proposes simple and practical adaptations on scanner functionality. They are easily compatible with the current definitions of the standard, which together with a new proposal for the backoff scheme, may significantly improve the discovery latencies and, thus, the probability of discovering a large number of devices in high density scenarios

A low-cost tracking system for running race applications based on bluetooth low energy technology

Timing points used in running races and other competition events are generally based on radio-frequency identification (RFID) technology. Athletes’ times are calculated via passive RFID tags and reader kits. Specifically, the reader infrastructure needed is complex and requires the deployment of a mat or ramps which hide the receiver antennae under them. Moreover, with the employed tags, it is not possible to transmit additional and dynamic information such as pulse or oximetry monitoring, alarms, etc. In this paper we present a system based on two low complex schemes allowed in Bluetooth Low Energy (BLE): the non-connectable undirected advertisement process and a modified version of scannable undirected advertisement process using the new capabilities present in Bluetooth 5. After fully describing the system architecture, which allows full real-time position monitoring of the runners using mobile phones on the organizer side and BLE sensors on the participants’ side, we derive the mobility patterns of runners and capacity requirements, which are determinant for evaluating the performance of the proposed system. They have been obtained from the analysis of the real data measured in the last Barcelona Marathon. By means of simulations, we demonstrate that, even under disadvantageous conditions (50% error ratio), both schemes perform reliably and are able to detect the 100% of the participants in all the cases. The cell coverage of the system needs to be adjusted when non-connectable process is considered. Nevertheless, through simulation and experimental, we show that the proposed scheme based on the new events available in Bluetooth 5 is clearly the best implementation alternative for all the cases, no matter the coverage area and the runner speed. The proposal widely exceeds the detection requirements of the real scenario, surpassing the measured peaks of 20 sensors per second incoming in the coverage area, moving at speeds that range from 1.5 m/s to 6.25 m/s. The designed real test-bed shows that the scheme is able to detect 72 sensors below 600 ms, fulfilling comfortably the requirements determined for the intended application. The main disadvantage of this system would be that the sensors are active, but we have proved that its consumption can be so low (9.5 µA) that, with a typical button cell, the sensor battery life would be over 10, 000 h of use

Low-cost test measurement setup for real IoT BLE sensor device characterization

The methodology presented in this paper aims to characterize impairments shown by real devices which are usually neglected on standardized tests but that become very important in massive IoT scenarios. For instance, we have measured that real BLE scanners are not able to scan continuously even though they are configured to do so. Besides, we have also found and demonstrated that some manufacturers seem not to apply any backoff mechanism although it is mandatory. These two unexpected behaviors have a significant impact on the performance of massive wireless sensor networks based on BLE. So, it becomes necessary to characterize these and other impairments. The proposed tests are based on device current consumption measurements and their association with the information obtained from upper layers. We describe a new low-cost generic measurement setup and provide all the necessary data (configuration parameters, scripts, etc.) for applying the proposed methodology. As an example, we use it to profile the behavior of Bluetooth Low Energy devices. Furthermore, the proposed setup can also inspire researchers to characterize other wireless technology devices, like Wi-Fi, Zigbee, LoRa, etc

Amplitude Zeros in Radiative Decays of Scalar Particles

We study amplitude zeros in radiative decay processes with a photon or a gluon emission of all possible scalar particles(e.g. scalar leptoquarks) which may interact with the usual fermions in models beyond the standard model. For the decays with a photon emission, the amplitudes clearly exhibit the factorization property and the differential decay rates vanish at specific values of a certain variable which are determined only by the electric charges of the particles involved and independent of the particle masses and the various couplings. For the decays with a gluon emission, even though the zeros are washed away, the differential decay rates still have distinct minima. The branching ratios as a function of leptoquark masses are presented for the scalar leptoquark decays. We also comment on the decays of vector particles into two fermions and a photon.Comment: Revtex, 17 pages + 6 figures (available upon request), Preprint, OITS559. Several typos with tex file were correcte

Bluetooth Mesh Analysis, Issues, and Challenges

BLE is a widely used short-range technology which has gained a relevant position inside the Internet-of-Things (IoT) paradigm development thanks to its simplicity, low-power consumption, low-cost and robustness. New enhancements over BLE have focused on supporting mesh network topology. Compared to other mesh networks, BLE mesh has only considered a managed flooding protocol in its first version. Managed flooding may generally seem inefficient in many contexts, but it is a high desirable option when data transmission is urgent, the network is small or its configuration changes in a very dynamic way. Knowing the interest to many application contexts, this paper analyses the impact of tweaking several features over the reliability and efficiency of the mesh network. These features are configured and controlled in different layers: message repetition schemes, the transmission randomization, the election of a scheme based on an acknowledged or unacknowledged transmission, etc. In order to estimate the real performance of a mesh network deployment, this paper evaluates the effects of the interaction of the chosen parameters, their appropriate adjustment in relation with the characteristics of real implementations and the true overhead related to the whole protocol stack. The paper identifies configuration challenges, proposes network tuning criteria and outlines possible standard improvements. For this purpose, a detailed assessment on the implementation and execution of real devices has been performed with their chipset limitations

A pilot study on bacterial isolates associated with purulent vaginal discharge in dairy cows in the south‐west region of Western Australia

This study aimed to determine the bacterial isolates associated with postpartum endometritis among dairy cows in Western Australia and their antimicrobial susceptibility profiles. A cross-sectional study was conducted between June–October 2020. Endometritis was defined as evidence of mucopurulent to purulent vaginal discharge 60–100 days postpartum. Vaginal discharge samples were obtained, cultured, identified and tested for antimicrobial susceptibility. A total of 118 bacterial isolates were grown from 46 animals, representing 36 species. The bacteria isolated from both aerobic and anaerobic cultures included Bacillus (60.2%), Streptococcus (12.7%), Trueperella (10.1%), Escherichia (6.7%) and Staphylococcus (5.9%). The remaining genera <5% were Histophilus, Aeroccocus, Enterococcus and Moraxella. Resistance was variable between isolates, but the highest resistance levels were observed in Streptococcal and Bacillus isolates to enrofloxacin, clindamycin and erythromycin, respectively. All Streptococcal isolates exhibited 100% resistance to enrofloxacin, and the greatest resistance levels were found in Streptococcus luteinises to trimethoprim-sulfamethoxazole 83%, clindamycin 66% and 33% quinupristin-dalfopristin. There was 84.5% resistance to clindamycin and 35.2% to erythromycin in the Bacillus isolates, with the highest resistance found in Bacillus licheniformis and Bacillus subtilis. Escherichia coli exhibited 12.5% resistance to gentamycin, ceftiofur, whereas amoxicillin-clavulanic acid exhibited 37.5%. Within the Staphylococcal isolates, 28.5%, 28.5%, 42.8% and 14.2% resistance to ceftiofur, erythromycin, cefoxitin, penicillin and tetracycline were observed, respectively. The presence of resistance to important antimicrobials for human use, such as cephalosporins, macrolides and fluoroquinolones, highlights the need for judicious use of antimicrobials in dairy cattle

Mitochondrial angiotensin receptors in dopaminergic neurons. Role in cell protection and aging-related vulnerability to neurodegeneration

The renin-angiotensin system (RAS) was initially considered as a circulating humoral system controlling blood pressure, being kidney the key control organ. In addition to the \u27classical\u27 humoral RAS, a second level in RAS, local or tissular RAS, has been identified in a variety of tissues, in which local RAS play a key role in degenerative and aging-related diseases. The local brain RAS plays a major role in brain function and neurodegeneration. It is normally assumed that the effects are mediated by the cell-surface-specific G-protein-coupled angiotensin type 1 and 2 receptors (AT1 and AT2). A combination of in vivo (rats, wild-type mice and knockout mice) and in vitro (primary mesencephalic cultures, dopaminergic neuron cell line cultures) experimental approaches (confocal microscopy, electron microscopy, laser capture microdissection, transfection of fluorescent-tagged receptors, treatments with fluorescent angiotensin, western blot, polymerase chain reaction, HPLC, mitochondrial respirometry and other functional assays) were used in the present study. We report the discovery of AT1 and AT2 receptors in brain mitochondria, particularly mitochondria of dopaminergic neurons. Activation of AT1 receptors in mitochondria regulates superoxide production, via Nox4, and increases respiration. Mitochondrial AT2 receptors are much more abundant and increase after treatment of cells with oxidative stress inducers, and produce, via nitric oxide, a decrease in mitochondrial respiration. Mitochondria from the nigral region of aged rats displayed altered expression of AT1 and AT2 receptors. AT2-mediated regulation of mitochondrial respiration represents an unrecognized primary line of defence against oxidative stress, which may be particularly important in neurons with increased levels of oxidative stress such as dopaminergic neurons. Altered expression of AT1 and AT2 receptors with aging may induce mitochondrial dysfunction, the main risk factor for neurodegeneratio

Submarine canyons and related features in the Alboran Sea: continental margins and major isolated reliefs

The analysis of a data set of multibeam bathymetry plus high resolution seismic and parametric profiles allow us to characterize the geomorphologic units on the Alboran Sea-floor as well as the evolution of morpho-sedimentary systems along the Pliocene and Quaternary, later than the main erosive Messinian event. Since the opening of the Gibraltar Straits, the sedimentary evolution of this basin has been controlled by the interchange of water masses between the Atlantic Ocean and the Mediterranean Sea. Basin physiography is also a consequence of the Pliocene-Quaternary compression which has progressively uplifted the sourrounding reliefs and deforms the interior and the margins of the basin. On this scenario, several submarine canyons and gullies have been developed in this basin which traverse especially the northern margin and the flanks of the Northern Alboran Ridge, without affecting the African margins. This fact must be related to the action of bottom contour currents which constitute the main morpho-sedimentary process. The influence of water masses distributed the sedimentary input carried by rivers and coming from the erosion of surrounding ranges. In the southern margin of this basin this influence is stronger and inhibits the development of transversal submarine canyons

Optical Sum Rule in Finite Bands

In a single finite electronic band the total optical spectral weight or optical sum carries information on the interactions involved between the charge carriers as well as on their band structure. It varies with temperature as well as with impurity scattering. The single band optical sum also bears some relationship to the charge carrier kinetic energy and, thus, can potentially provide useful information, particularly on its change as the charge carriers go from normal to superconducting state. Here we review the considerable advances that have recently been made in the context of high $T_c$ oxides, both theoretical and experimental.Comment: Review article accepted for publication in J. Low Temp. Phys. 29 pages, 33 figure

Flux Phase as a Dynamic Jahn-Teller Phase: Berryonic Matter in the Cuprates?

There is considerable evidence for some form of charge ordering on the hole-doped stripes in the cuprates, mainly associated with the low-temperature tetragonal phase, but with some evidence for either charge density waves or a flux phase, which is a form of dynamic charge-density wave. These three states form a pseudospin triplet, demonstrating a close connection with the E X e dynamic Jahn-Teller effect, suggesting that the cuprates constitute a form of Berryonic matter. This in turn suggests a new model for the dynamic Jahn-Teller effect as a form of flux phase. A simple model of the Cu-O bond stretching phonons allows an estimate of electron-phonon coupling for these modes, explaining why the half breathing mode softens so much more than the full oxygen breathing mode. The anomalous properties of $O^{2-}$ provide a coupling (correlated hopping) which acts to stabilize density wave phases.Comment: Major Revisions: includes comparisons with specific cuprate phonon modes, 16 eps figures, revte