Generation of high energy density by fs-laser-induced confined microexplosion

Confined microexplosion produced by a tightly focused fs-laser pulse inside transparent material proved to be an efficient and inexpensive method for achieving high energy density up to several MJ per cm3 in the laboratory table-top experiments. First studies already confirmed the generation of TPa-range pressure, the formation of novel super-dense material phases and revealed an unexpected phenomenon of spatial separation of ions with different masses in hot non-equilibrium plasma of confined microexplosion. In this paper, we show that the intense focused pulse propagation accompanied by a gradual increase of ionization nonlinearity changes the profile and spectrum of the pulse. We demonstrate that the motion of the ionization front in the direction opposite to the pulse propagation reduces the absorbed energy density. The voids in our experiments with fused silica produced by the microexplosion-generated pressure above Young's modulus indicate, however, that laser fluence up to 50 times above the ionization threshold is effectively absorbed in the bulk of the material. The analysis shows that the ion separation is enhanced in the non-ideal plasma of microexplosion. These findings open new avenues for the studies of high-pressure material transformations and warm dense matter conditions by confined microexplosion produced by intense fs-laser

Study and Analysis of HySi Data in 400 to 500 nm VNIR Spectrum for Precision Agriculture

The ability to extract information about world and present it in way that our visual perception can comprehend is ultimate goal of imaging science in remote sensing .Hyperspectral imaging system is most powerful tool in the field of remote sensing also called as imaging spectroscopy, It is new technique used by researcher to detect terrestrial, vegetation and mineral. This paper reports analysis of hyperspectral images. Firstly the hyperspectral image analyzed by using supervised classification of Amravati region from Maharashtra province of India. The report reveals spectral analysis of Amravati region. We acquired satellite imagery to perform the classification using maximum like hood classifier. Analysis is performing in ERDAS to determine the spectral reflectance against the no of band. The analytical outcome of paper is representing the soil, water, vegetation index of the region

Expansion-limited aggregation of nanoclusters in a single-pulse laser-produced plume

Formation of carbon nanoclusters in a single-laser-pulse created ablation plume was studied both in vacuum and in a noble gas environment at various pressures. The developed theory provides cluster radius dependence on combination of laser parameters, properties of ablated material, and type and pressure of an ambient gas in agreement with experiments. The experiments were performed on carbon nanoclusters formed by laser ablation of graphite targets with 12 picosecond 532 nm laser pulses at MHz-range repetition rate in a broad range of ambient He, Ar, Kr, and Xe gas pressures from 2× 10-2 to 1500 Torr. The experimental results confirmed our theoretical prediction that the average size of the nanoparticles depends weakly on the type of the ambient gas used, and is determined exclusively by the single laser pulse parameters even at the repetition rate as high as 28 MHz with the time gap 36 ns between the pulses. The most important finding relates to the fact that in vacuum the cluster size is mainly determined by hydrodynamic expansion of the plume while in the ambient gas it is controlled by atomic diffusion in the gas. We demonstrate that the ultrashort pulses can be used for production of clusters with the size less than the critical value, which separates the particles with properties drastically different from those of a material in a bulk. The presented results of experiments on formation of carbon nanoclusters are in close agreement with the theoretical scaling. The developed theory is applicable for cluster formation from any monatomic material, such as silicon for example

Unconventional magnetism in all-carbon nanofoam

We report production of nanostructured carbon foam by a high-repetition-rate, high-power laser ablation of glassy carbon in Ar atmosphere. A combination of characterization techniques revealed that the system contains both sp2 and sp3 bonded carbon atoms. The material is a novel form of carbon in which graphite-like sheets fill space at very low density due to strong hyperbolic curvature, as proposed for ?schwarzite?. The foam exhibits ferromagnetic-like behaviour up to 90 K, with a narrow hysteresis curve and a high saturation magnetization. Such magnetic properties are very unusual for a carbon allotrope. Detailed analysis excludes impurities as the origin of the magnetic signal. We postulate that localized unpaired spins occur because of topological and bonding defects associated with the sheet curvature, and that these spins are stabilized due to the steric protection offered by the convoluted sheets.Comment: 14 pages, including 2 tables and 7 figs. Submitted to Phys Rev B 10 September 200

Excitation of Coherent Phonons in Crystalline B: theory for driving atomic vibrations by femtosecond pulses

In this paper we present experimental and theoretical studies of reflectivity oscillations of an optical probe beam reflected from a single-crystal of bismuth excited by 35 fs laser pulses at deposited energy density above the melting temperature. Coherent and incoherent lattice dynamics as well as electrons dynamics were investigated starting from the reflectivity changes, measured with high accuracy ΔR/R < 10. The complex behaviour of the reflectivity could not be explained in the light of the existing theories. Therefore, we developed a new theory, starting from the very basic principles of lasermatter interaction, which shows good agreement with experimental results. We establish a direct dependence of the transient reflectivity on atomic motions driven by electron temperature gradient through electron-phonon coupling

Cluster formation through the action of a single picosecond laser pulse

We demonstrate experimentally and describe theoretically the formation of carbon nanoclusters created by single picosecond laser pulses. We show that the average size of a nanocluster is determined exclusively by single laser pulse parameters and is independent of the gas fill (He, Ar, Kr, Xe) and pressure in a range from 20mTorr to 200 Torr. Simple kinetic theory allows estimates to be made of the cluster size, which are in qualitative agreement with the experimental data. We conclude that the role of the buffer gas is to induce a transition between thin solid film formation on the substrate and foam formation by diffusing the clusters through the gas, with no significant effect upon the average cluster size

Picosecond high-repetition-rate pulsed laser ablation of dielectrics: the effect of energy accumulation between pulses

We report experiments on the ablation of arsenic trisulphide and silicon using high-repetition-rate (megahertz) trains of picosecond pulses. In the case of arsenic trisulphide, the average single pulse fluence at ablation threshold is found to be >100 times lower when pulses are delivered as a 76-MHz train compared with the case of a solitary pulse. For silicon, however, the threshold for a 4.1-MHz train equals the value for a solitary pulse. A model of irradiation by high-repetition-rate pulse trains demonstrates that for arsenic trisulphide energy accumulates in the target surface from several hundred successive pulses, lowering the ablation threshold and causing a change from the laser-solid to laser-plasma mode as the surface temperature increases

Ultrafast electronic relaxation in superheated bismuth

Interaction of moving electrons with vibrating ions in the lattice forms the basis for many physical properties from electrical resistivity and electronic heat capacity to superconductivity. In ultrafast laser interaction with matter the electrons are heated much faster than the electron-ion energy equilibration, leading to a two-temperature state with electron temperature far above that of the lattice. The rate of temperature equilibration is governed by the strength of electron-phonon energy coupling, which is conventionally described by a coupling constant, neglecting the dependence on the electron and lattice temperature. The application of this constant to the observations of fast relaxation rate led to a controversial notion of 'ultra-fast non-thermal melting' under extreme electronic excitation. Here we provide theoretical grounds for a strong dependence of the electron-phonon relaxation time on the lattice temperature. We show, by taking proper account of temperature dependence, that the heating and restructuring of the lattice occurs much faster than were predicted on the assumption of a constant, temperature independent energy coupling. We applied the temperature-dependent momentum and energy transfer time to experiments on fs-laser excited bismuth to demonstrate that all the observed ultra-fast transformations of the transient state of bismuth are purely thermal in nature. The developed theory, when applied to ultrafast experiments on bismuth, provides interpretation of the whole variety of transient phase relaxation without the non-thermal melting conjecture