Computer Simulation of Stress-Strain State of Oil Gathering Pipeline Designed for Ugut Field

The paper presents the stress and strain state modeling of infield pipeline in Ugut oil field. The finite element models of the stress field distribution in the pipeline wall are presented in this paper. The attention is paid to the pipeline reliability under stress conditions induced by the internal pressure and external compressive or tensile loads

Enhanced magneto-optic properties in sputtered Bi-containing ferrite garnet thin films fabricated using oxygen plasma treatment and metal oxide protective layers

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. Magneto-optic (MO) imaging and sensing are at present the most developed practical applications of thin-film MO garnet materials. However, in order to improve sensitivity for a range of established and forward-looking applications, the technology and component-related advances are still necessary. These improvements are expected to originate from new material system development. We propose a set of technological modifications for the RF-magnetron sputtering deposition and crystallization annealing of magneto-optic bismuth-substituted iron-garnet films and investigate the improved material properties. Results show that standard crystallization annealing for the as-deposited ultrathin (sputtered 10 nm thick, amorphous phase) films resulted in more than a factor of two loss in the magneto-optical activity of the films in the visible spectral region, compared to the liquid-phase grown epitaxial films. Results also show that an additional 10 nm-thick metal-oxide (Bi2O3) protective layer above the amorphous film results in ~2.7 times increase in the magneto-optical quality of crystallized iron-garnet films. On the other hand, the effects of post-deposition oxygen (O2) plasma treatment on the magneto-optical (MO) properties of Bismuth substituted iron garnet thin film materials are investigated. Results show that in the visible part of the electromagnetic spectrum (at 532 nm), the O2 treated (up to 3 min) garnet films retain higher specific Faraday rotation and figures of merit compared to non-treated garnet films

Phonon Localization in One-Dimensional Quasiperiodic Chains

Quasiperiodic long range order is intermediate between spatial periodicity and disorder, and the excitations in 1D quasiperiodic systems are believed to be transitional between extended and localized. These ideas are tested with a numerical analysis of two incommensurate 1D elastic chains: Frenkel-Kontorova (FK) and Lennard-Jones (LJ). The ground state configurations and the eigenfrequencies and eigenfunctions for harmonic excitations are determined. Aubry's "transition by breaking the analyticity" is observed in the ground state of each model, but the behavior of the excitations is qualitatively different. Phonon localization is observed for some modes in the LJ chain on both sides of the transition. The localization phenomenon apparently is decoupled from the distribution of eigenfrequencies since the spectrum changes from continuous to Cantor-set-like when the interaction parameters are varied to cross the analyticity--breaking transition. The eigenfunctions of the FK chain satisfy the "quasi-Bloch" theorem below the transition, but not above it, while only a subset of the eigenfunctions of the LJ chain satisfy the theorem.Comment: This is a revised version to appear in Physical Review B; includes additional and necessary clarifications and comments. 7 pages; requires revtex.sty v3.0, epsf.sty; includes 6 EPS figures. Postscript version also available at http://lifshitz.physics.wisc.edu/www/koltenbah/koltenbah_homepage.htm

Correlations in Transmission of Light through a Disordered Amplifying Medium

The angular and frequency correlation functions of the transmission coefficient for light propagation through a strongly scattering amplifying medium are considered. It is found that just as in the case of an elastic scattering medium the correlation function consists of three terms. However, the structure of the terms is rather different. Angular correlation has a power-law decay and exhibits oscillations. There is no "memory effect" as in the case of an elastic medium. Interaction between diffusion modes is strongly enhanced near the lasing threshold. Frequency correlation scale decreases close to the lasing threshold. We also consider time correlations of the transmission in the case of nonstationary inhomogeneities. We find short- and long-range time correlations. The scale of the short-range correlation decreases, while the long-range correlation scale becomes infinite near the threshold.Comment: 16 pages, 7 postscript figure

Results of the modal analysis of the underground mine hydraulic leg in various modes of its operation

The article describes the construction of models and the initial conditions for the various modes of legs operation. The article presents the way of setting the initial conditions for the initial thrust with constant pressure and for leg operation in the mode of increased pressure caused by the lowering of the roof. The results of modal analyses conducted for 2 modes of leg operation are shown. It is shown that the form and frequency of natural oscillations of hydraulic legs are determined by their design, pressures of the initial thrust and nominal operating resistance, as well as by the operating modes which differ in schemes of interaction of leg elements with interacting elements of the support and the roof and floor strata. At the same time, changing the operating mode of the legs changes the natural frequency both to the higher and to the lower side, as well as the form of oscillations of certain frequencies. For more accurate calculation of the frequency response of hydraulic legs to the external load of frequencies, it is proposed to take into account not only their design and power properties, but also the modes of their loading

Piezoelectric-Layered Structures Based on Synthetic Diamond

Results of theoretical, modeling, and experimental investigation of microwave acoustic properties of piezoelectric layered structure “Me1/AlN/Me2/(100) diamond” have been presented within a wide frequency band 0.5–10 GHz. The highest among known material quality parameter Q × f ~ 1014 Hz for the IIa type synthetic diamond at operational frequency ~10 GHz has been found. Conditions of UHF excitation and propagation of the bulk, surface, and Lamb plate acoustic waves have been established and studied experimentally. Frequency dependencies of the impedance and quality factor have been studied to obtain a number of piezoelectric layered structure parameters as electromechanical coupling coefficient, equivalent circuit parameters, etc. Results of 2D finite element modeling of a given piezoelectric layered structure have been compared with the experimental ones obtained for the real high-overtone bulk acoustic resonator. An origin of high-overtone bulk acoustic resonator’s spurious resonant peaks has been studied. Results on UHF acoustic attenuation of IIa-type synthetic single crystalline diamond have been presented and discussed in terms of Akhiezer and Landau–Rumer mechanisms of phonon–phonon interaction. Identification and classification of Lamb waves belonging to several branches as well as dispersive curves of phase velocities have been executed. Necessity of introducing a more correct Lamb-mode classification has been recognized

Study of Falling Roof Vibrations in a Production Face at Roof Support Resistance in the Form of Concentrated Force

One of the main reasons of roof support failures in production faces is mismatch of their parameters and parameters of dynamic impact on the metal structure from the falling roof during its secondary convergences. To assess the parameters of vibrational interaction of roof support with the roof, it was suggested to use computational models of forces application and a partial differential equation of fourth order describing this process, its numerical solution allowed to assess frequency, amplitude and speed of roof strata movement depending on physical and mechanical properties of the roof strata as well as on load bearing and geometry parameters of the roof support. To simplify solving of the differential equation, roof support response was taken as the concentrated force

Application of Thin Piezoelectric Films in Diamond-Based Acoustoelectronic Devices

The theory of external loading influence on acoustic parameters of piezoelectric five-layered structure as “Al/(001) AlN/Mo/(001) diamond/Me” has been developed. Oscillations in diamond-based high-overtone bulk acoustic resonators (HBARs) have been investigated in terms of 3D FEM simulation. Peculiarities of technology of aluminum-scandium nitride (ASN) films have been discussed. Composition Al0.8Sc0.2N was obtained to create the diamond-based HBAR and SAW resonator. Application of ASN films has resulted in a drastic increasing an electromechanical coupling up to 2.5 times in comparison with aluminum nitride. Development of ASN technology in a way of producing a number of compositions with the better piezoelectric properties has a clear prospective. SAW resonator based on “Al IDT/(001) AlN/(001) diamond” structure has been investigated in the band 400–1500 MHz. The highest-quality factor Q ≈ 1050 was observed for the Sezawa mode at 1412 MHz. Method of measuring HBAR’s parameters within 4–400 K at 0.5–5 GHz has been developed. Results on temperature dependence of diamond’s Q-factor at relatively low frequencies were quite different in comparison with the ones at the frequencies up to 5 GHz. Difference could be explained in terms of changing mechanism of acoustic attenuation from Akhiezer’s type to the Landau-Rumer’s one at higher frequencies in diamond