417 research outputs found

    Optimization of Patterned Surfaces for Improved Superhydrophobicity Through Cost-Effective Large-Scale Computations

    Full text link
    The growing need for creating surfaces with specific wetting properties, such as superhyrdophobic behavior, asks for novel methods for their efficient design. In this work, a fast computational method for the evaluation of patterned superhyrdophobic surfaces is introduced. The hydrophobicity of a surface is quantified in energy terms through an objective function. The increased computational cost led to the parallelization of the method with the Message Passing Interface (MPI) communication protocol that enables calculations on distributed memory systems allowing for parametric investigations at acceptable time frames. The method is demonstrated for a surface consisting of an array of pillars with inverted conical (frustum) geometry. The parallel speedup achieved allows for low cost parametric investigations on the effect of the fine features (curvature and slopes) of the pillars on the superhydophobicity of the surface and consequently for the optimization of superhyrdophobic surfaces.Comment: 18 pages, 18 figure

    Prevention of fish photobacteriosis. Comparison of the efficacy of intraperitoneally administered commercial and experimental vaccines

    Get PDF
    Two commercial multivalent vaccines against vibriosis, caused by Vibrio anguillarum serotype(s) and photobacteriosis, caused by Photobacterium damsela subsp. piscicida, one with oil adjuvant (AJ) and the other,being an aqueous solution (AV), and an experimental monovalent (Ph. damselae subsp. piscicida) vaccine inactivated with formalin or heat, namely EVF and EVH, were tested in laboratory trials on sea bass (Dicentrarchus labrax) in respect to their efficacy against experimentally induced photobacteriosis. The first trial aiming at high bacterial pressure was carried out 34 days post-vaccination and resulted in 90% mortalities in the control. The relative per cent survival (RPS) of vaccinated fish was calculated at 24, 3.7, 0 and 0 for the AJ, AV, EVF and EVH formulations, respectively. The second trial aiming at medium bacterial pressure was carried out 49 days post-vaccination and resulted in 45% mortalities in the control. The relative per cent survival (RPS) of vaccinated fish was calculated at 100, 92.7, 77.8 and 66.7 for the AJ, EVF, EVH and AV, formulations, respectively. Apparently, under both these high and medium bacterial pressure conditions, the commercial vaccine AJ performed better than the commercial vaccine AV, while under medium pressure there was no statistical difference between the performance of EVF and AJ. The measurement of specific antibody titers in sera collected from all fish groups 49 days post-vaccination, showed high levels in the fish vaccinated with the AJ vaccine, almost three times lower levels for the AV and EVF vaccines and even lower levels for the EVH vaccine. Results are discussed in respect to the choices mariculture companies have in selecting a commercial vaccine against photobacteriosis and possible alternatives, which, if commercially developed, may reduce vaccine cost

    Proposing a Governance model for environmental crises

    Get PDF
    During August 2021, a wildfire outbreak in Evia, Greece's second largest island, resulted in a major environmental and economic crisis. Apart from biodiversity and habitat loss, the disaster triggered a financial crisis because it wiped out wood-productive forests and outdoor areas that attract visitors. This crisis highlighted the need for a new governance model in order to respond to environmental crises more effectively. The aim of this study was to investigate the acceptance and attitudes of relevant stakeholders towards establishing a Hub a proposed governance model responsible for monitoring and restoring the natural capital and biodiversity after environmental crises. Results based on quantitative data collected via questionnaires showed that most respondents were positive to the Hub and perceived that its main functions should be to recommend measures after environmental crises and to facilitate cooperation among involved stakeholders. Moreover, results pointed to preferred funding sources, stakeholder groups that should participate in the Hub and key performance indicators (KPIs) for monitoring Hub's performance. The applied methodology could guide the establishment of governance models both in the study area and other countries facing environmental crises

    First results of the 241Am(n,f) cross section measurement at the Experimental Area 2 of the n_TOF facility at CERN

    Get PDF
    Feasibility, design and sensitivity studies on innovative nuclear reactors that could address the issue of nuclear waste transmutation using fuels enriched in minor actinides, require high accuracy cross section data for a variety of neutron-induced reactions from thermal energies to several tens of MeV. The isotope 241Am (T1/2= 433 years) is present in high-level nuclear waste (HLW), representing about 1.8 % of the actinide mass in spent PWR UOx fuel. Its importance increases with cooling time due to additional production from the ÎČ-decay of 241Pu with a half-life of 14.3 years. The production rate of 241 Am in conventional reactors, including its further accumulation through the decay of 241Pu and its destruction through transmutation/incineration are very important parameters for the design of any recycling solution. In the present work, the 241 Am(n,f) reaction cross-section was measured using Micromegas detectors at the Experimental Area 2 of the n_TOF facility at CERN. For the measurement, the 235U(n,f) and 238U(n,f) reference reactions were used for the determination of the neutron flux. In the present work an overview of the experimental setup and the adopted data analysis techniques is given along with preliminary results

    Present Status and Future Programs of the n_TOF Experiment

    Get PDF
    This is an Open Access article distributed under the terms of the Creative Commons Attribution-Noncommercial License 3.0, which permits unrestricted use, distribution, and reproduction in any noncommercial medium, provided the original work is properly citedThe neutron time-of-flight facility n_TOF at CERN, Switzerland, operational since 2001, delivers neutrons using the Proton Synchrotron (PS) 20 GeV/c proton beam impinging on a lead spallation target. The facility combines a very high instantaneous neutron flux, an excellent time of flight resolution due to the distance between the experimental area and the production target (185 meters), a low intrinsic background and a wide range of neutron energies, from thermal to GeV neutrons. These characteristics provide a unique possibility to perform neutron-induced capture and fission cross-section measurements for applications in nuclear astrophysics and in nuclear reactor technology.The most relevant measurements performed up to now and foreseen for the future will be presented in this contribution. The overall efficiency of the experimental program and the range of possible measurements achievable with the construction of a second experimental area (EAR-2), vertically located 20 m on top of the n_TOF spallation target, might offer a substantial improvement in measurement sensitivities. A feasibility study of the possible realisation of the installation extension will be also presented

    Measurement of the 12C(n,p)12B cross section at n-TOF at CERN by in-beam activation analysis

    Get PDF
    The integral cross section of the 12C(n,p)12B reaction has been determined for the first time in the neutron energy range from threshold to several GeV at the n-TOF facility at CERN. The measurement relies on the activation technique with the ÎČ decay of 12B measured over a period of four half-lives within the same neutron bunch in which the reaction occurs. The results indicate that model predictions, used in a variety of applications, are mostly inadequate. The value of the integral cross section reported here can be used as a benchmark for verifying or tuning model calculations.Peer reviewedFinal Accepted Versio

    Measurement of 73 Ge(n,Îł) cross sections and implications for stellar nucleosynthesis

    Get PDF
    © 2019 The Author(s). Published by Elsevier B.V.73 Ge(n,γ) cross sections were measured at the neutron time-of-flight facility n_TOF at CERN up to neutron energies of 300 keV, providing for the first time experimental data above 8 keV. Results indicate that the stellar cross section at kT=30 keV is 1.5 to 1.7 times higher than most theoretical predictions. The new cross sections result in a substantial decrease of 73 Ge produced in stars, which would explain the low isotopic abundance of 73 Ge in the solar system.Peer reviewe

    Measurement of the 240Pu(n,f) cross-section at the CERN n-TOF facility : First results from experimental area II (EAR-2)

    Get PDF
    The accurate knowledge of the neutron-induced fission cross-sections of actinides and other isotopes involved in the nuclear fuel cycle is essential for the design of advanced nuclear systems, such as Generation-IV nuclear reactors. Such experimental data can also provide the necessary feedback for the adjustment of nuclear model parameters used in the evaluation process, resulting in the further development of nuclear fission models. In the present work, the 240Pu(n,f) cross-section was measured at CERN's n-TOF facility relative to the well-known 235U(n,f) cross section, over a wide range of neutron energies, from meV to almost MeV, using the time-of-flight technique and a set-up based on Micromegas detectors. This measurement was the first experiment to be performed at n-TOF's new experimental area (EAR-2), which offers a significantly higher neutron flux compared to the already existing experimental area (EAR-1). Preliminary results as well as the experimental procedure, including a description of the facility and the data handling and analysis, are presented

    The 33S(n,α)30Si cross section measurement at n-TOF-EAR2 (CERN) : From 0.01 eV to the resonance region

    Get PDF
    The 33S(n,α)30Si cross section measurement, using 10B(n,α) as reference, at the n-TOF Experimental Area 2 (EAR2) facility at CERN is presented. Data from 0.01 eV to 100 keV are provided and, for the first time, the cross section is measured in the range from 0.01 eV to 10 keV. These data may be used for a future evaluation of the cross section because present evaluations exhibit large discrepancies. The 33S(n,α)30Si reaction is of interest in medical physics because of its possible use as a cooperative target to boron in Neutron Capture Therapy (NCT)
    • 

    corecore