Synthesis and Characterization of functional ceramic materials at the nano- and microscale with enhanced properties

Semiconductor nanoparticles (NPs) and nanowires (NWs) of doped ZnO system have been synthesised at low temperature (190 °C) by a novel Polyol-Mediated Thermolysis (PMT) process and Vapour-Solid (VS) reaction. Ce/Ru doped ZnO NPs with different molar content (1-3--5-10%) have been synthesised by both experimental processes. The crystallite size, morphology, specific surface area and band gap have been evaluated. Also, the structural and functional characteristics were carried out by X-ray diffraction technique (XRD), high resolution transmission electron microscopy (HRTEM), Brunauer, Emmett and Teller (BET) method, UV-Vis diffuse reflectance spectra (DRS), UV-Vis spectroscopy and photoluminescence measurements (PL). Also, the photocatalytic activities of ZnO nanoparticles were evaluated by removal rate of methyleneblue (MB) under UV irradiation (365 nm) at RT. XRD patterns revealed a hexagonal ZnO wurtzite-type crystalline structure with a preferred orientation of(101) plane. Any secondary phases have been identified such as Ce02, Ce203, ee, Ru02, Ru304, Ru. HRTEM showed NPs in shape from spherical/ellipsoidal to hexagonal, that does not change significantly with the increasing of precursor solution concentration and kind of dopant element in the samples obtained from PMTprocess. The size of NPs was observed in the range from 16 to 23 run. Using the Kubelka-Munk treatment on the diffuse reflectance spectra, the direct band energy has been estimated at <3.0 eV in the Ru-doped samples. The PL spectra mainly consist of four emission bands: (i) a strong UV emission band, (ii) a weak blue band, (iii) a blue-green band and (iv) a green-yellow band, respectively. The reported results showed the photocatalytic efficiency of doped ZnO nanoparticles was always enhanced

Photocatalytic activity of electric-arc furnace flue dusts

Two electric-arc furnace flue dusts, a waste generated during the steel production process, were characterized and their photocatalytic activity was assessed. Chemical composition by X-ray fluorescence (XRF) analysis identified that both dusts were principally formed by iron, zinc and chromium oxides. Structural characterization carried out by X-ray diffraction patterns (XRD), and micro-Raman measurements demonstrated that ZnFe_2O_4 (zinc ferrite), FeCr_2O_4 (chromite) and ZnO (zincite) are present in both waste dusts as majority phases. Scanning electron microscopy (SEM) images showed that both dusts are formed by nanoparticles with a globular and octahedral morphology characteristic of the type of flue dusts formation and the obtained phases. Cathodoluminescence (CL) spectra show the characteristics bands of spinel structure (ZnFe_2O_4) and Fe^(3+) emission. X-ray photoelectron spectroscopy (XPS) measurements indicate that Fe ions could be present in 2+ and 3+ oxidation state in the spinel structure, while zinc and chromium ions are in 2+ and 3+, respectively. In addition, the photocatalytic experiments demonstrated that the analyzed samples could be useful as photocatalyzed showing a degradation percentage above 75 %

Seed removal in two coexisting oak species: ecological consequences of seed size, plant cover and seed-drop timing

11 pages, 4 tables, 3 figures, 81 references.Seed predation and dispersal can critically influence plant community structure and dynamics. Inter-specific differences arising at these early stages play a crucial role on tree recruitment patterns, which in turn could influence forest dynamics and species segregation in heterogeneous environments such as Mediterranean forests. We investigated removal rates from acorns set onto the ground in two coexisting Mediterranean oak species Quercus canariensis and Q. suber in southern Spain. We developed maximum likelihood estimators to investigate the main factors controlling probabilities of seed removal and to describe species-specific functional responses. To account for inter-specific differences in seed-drop timing, two experiments were established: a simultaneous exposure of acorns of the two species (synchronous experiments) and a seed exposure following their natural seed-drop phenology (diachronic experiments). A total of 1536 acorns were experimentally distributed along a wide and natural gradient of plant cover, and removal was periodically monitored for three months at two consecutive years (with contrasting differences in seed production and thus seed availability on the ground). The probability of seed removal increased with plant cover (leaf area index, LAI) for the two oak species. Inter-specific differences in acorn removal were higher in open areas and disappeared in closed microhabitats, especially during a non-mast year. Despite later seed-drop, Q. suber acorns were removed faster and at a higher proportion than those of Q. canariensis. The higher probability of seed removal for this species could be attributed to its larger seed size compared to Q. canariensis, as inter-specific differences were less pronounced when similar sized acorns were exposed. Inter-specific differences in seed removal, arising from seed size variability and microsite heterogeneity, could be of paramount importance in oak species niche separation, driving stand dynamics and composition along environmental gradients.This study was supported by FPU and FPI-MEC grants to IMPR and IRU, and by the Spanish MEC projects Heteromed (REN2002-4041- C02-02) and Dinamed (CGL2005-5830-C03-01). This research is part of the Globimed (www.globimed.net) network on forest ecology.Peer reviewe

Synthesis of Ce/Ru Doped ZnO photocatalysts to the degradation of emerging pollutants in wastewater

Semiconductor nanoparticles (NPs) and nanowires (NWs) of doped ZnO system with different dopant content have been synthesized by Polyol-Mediated Thermolysis (PMT) process and Vapour-Solid (VS) reaction. The average crystallite size, morphology, specific surface area, and direct band gap have been evaluated. The structural and functional characteristics have been studied by X-Ray Diffraction techniques (XRD), Field Emission Scanning Electron Microscope (FESEM), High Resolution Transmission Electron Microscopy (HRTEM), Brunauer, Emmett and Teller (BET) method, UV-Vis Diffuse Reflectance Spectra (DRS), UV-Vis Spectroscopy, and Photoluminescence measurements (PL). Also, the photocatalytic activities of pure and doped ZnONPs were evaluated by removal rate of Methylene Blue (MB) under UV irradiation (365 nm) at room temperature. XRD patterns revealed the common hexagonal ZnO Wurtzite-type structures with a preferred orientation of (101) plane. Secondary phases as CeO2, Ce2O3, Ce, RuO2, Ru3O4, Ruhave been identified. For both dopant, Ceand Ru, and for all the concentrations in the precursor solution, FESEM and HRTEM showed NPswith morphologies ranging from spherical/ellipsoidal to hexagonal. The size of NPs was observed to decrease (from ~30 to ~16 nm) with increasing doping concentration due to the interaction between the Ce-O-Zn or Ru-O-Zn ions. EDS results confirmed the incorporation of Ce or Ru ions into ZnO lattice.Using the Kubelka-Munk treatment on the diffuse reflectance spectra, the direct band gap energy has been estimated to be slightly lower than 3.0 eV in both, the Ce and Ru-doped samples. Compared with pure ZnO NPs, the PL spectra of the doped NPs showed red-shifted UV emission and an enhanced blue emission with the typical broad green-yellow emission. The results showed that photocatalytic efficiency of doped ZnO NPs was always enhanced

Detecting web requirements conflicts and inconsistencies under a model-based perspective

Web requirements engineering is an essential phase in the software project life cycle for the project results. This phase covers different activities and tasks that in many situations, depending on the analyst’s experience or intuition, help getting accurate specifications. One of these tasks is the conciliation of requirements in projects with different groups of users. This article presents an approach for the systematic conciliation of requirements in big projects dealing with a model-based approach. The article presents a possible implementation of the approach in the context of the NDT (Navigational Development Techniques) Methodology and shows the empirical evaluation in a real project by analysing the improvements obtained with our approach. The paper presents interesting results that demonstrate that we can get a reduction in the time required to find conflicts between requirements, which implies a reduction in the global development costs.Laboratorio de Investigación y Formación en Informática Avanzad

Detecting web requirements conflicts and inconsistencies under a model-based perspective

Web requirements engineering is an essential phase in the software project life cycle for the project results. This phase covers different activities and tasks that in many situations, depending on the analyst’s experience or intuition, help getting accurate specifications. One of these tasks is the conciliation of requirements in projects with different groups of users. This article presents an approach for the systematic conciliation of requirements in big projects dealing with a model-based approach. The article presents a possible implementation of the approach in the context of the NDT (Navigational Development Techniques) Methodology and shows the empirical evaluation in a real project by analysing the improvements obtained with our approach. The paper presents interesting results that demonstrate that we can get a reduction in the time required to find conflicts between requirements, which implies a reduction in the global development costs.Laboratorio de Investigación y Formación en Informática Avanzad

The enrichment of an alkaliphilic biofilm consortia capable of the anaerobic degradation of isosaccharinic acid from cellulosic materials incubated within an anthropogenic, hyperalkaline environment.

Anthropogenic hyper-alkaline sites provide an environment that is analogous to proposed cementitious geological disposal facilities (GDF) for radioactive waste. Under anoxic, alkaline conditions cellulosic wastes will hydrolyse to a range of cellulose degradation products (CDP) dominated by isosaccharinic acids (ISA). In order to investigate the potential for microbial activity in a cementitious GDF, cellulose samples were incubated in the alkaline (∼pH 12), anaerobic zone of a lime kiln waste site. Following retrieval, these samples had undergone partial alkaline hydrolysis and were colonised by a Clostridia dominated biofilm community, where hydrogenotrophic, alkaliphilic methanogens were also present. When these samples were used to establish an alkaline CDP fed microcosm, the community shifted away from Clostridia, methanogens became undetectable and a flocculate community dominated by Alishewanella sp. established. These flocs were composed of bacteria embedded in polysaccharides and protein stabilised by extracellular DNA. This community was able to degrade all forms of ISA with >60% of the carbon flow being channelled into extracellular polymeric substance (EPS) production. This study demonstrated that alkaliphilic microbial communities can degrade the CDP associated with some radioactive waste disposal concepts at pH 11. These communities divert significant amounts of degradable carbon to EPS formation, suggesting that EPS has a central role in the protection of these communities from hyper-alkaline conditions

Electron transport via local polarons at interface atoms

Electronic transport is profoundly modified in the presence of strong electron-vibration coupling. We show that in certain situations, the electron flow takes place only when vibrations are excited. By controlling the segregation of boron in semiconducting Si(111)-3√×3√R30° surfaces, we create a type of adatom with a dangling-bond state that is electronically decoupled from any other electronic state. However, probing this state with scanning tunnelling microscopy at 5 K yields high currents. These findings are rationalized by ab-initio calculations that show the formation of a local polaron in the transport process