Aperture-Fed Quad-Port Dual-Band Dielectric Resonator-MIMO Antenna for Sub-6 GHz 5G and WLAN Application

A four-port dielectric resonator-based connected ground multiple-input multiple-output (MIMO) antenna is designed. The presented antenna was excited through the aperture feeding technique. The dual bands are achieved by optimally feeding the rectangular dielectric resonator through engineered triangular slots. The antenna has operating modes of TE111X and TE111Y at 4.5 GHz and 5 GHz, respectively. It presents a 2 : 1 VSWR bandwidth of 2.64% (4.48 GHz-4.60 GHz) and 1.2% (4.96 GHz-5.04 GHz) in the lower and upper bands, respectively. The edge-to-edge distance between array elements is around 7.5 mm. The single antenna dimension is 30 mm x 30 mm, whereas the four-port antenna dimension is 60 mm x 60 mm. The optimum isolation was achieved by carefully placing the antenna elements on the substrate through multiple iterations. The antenna provides port isolation better than 20 dB at both resonances with full ground profile. The advantage of the antenna is that it provides fair antenna and MIMO parameters without additional isolation techniques. The antenna has efficiency in order of 88.02% and 86.31%. The peak gain is 7.67 dBi and 8.32 dBi at 4.5 GHz and 5 GHz, respectively. The optimum envelope correlation coefficient (ECC) is 0.037, channel capacity coss (CCL) is 0.2 bits/sec/Hz, diversity gain (DG) is 9.99 dB, and total active reflection coefficient (TARC) is -18.87. The antenna elements are orthogonally placed with adequate separation to achieve polarization diversity and spatial diversity. The antenna provides the utilization in Sub-6 GHz 5G and WLAN communication applications

Four-Port Dual-Band Multiple-Input Multiple-Output Dielectric Resonator Antenna for Sub-6 GHz 5G Communication Applications

A four-port dielectric resonator (DR)-based multiple-input multiple-output (MIMO) antenna is presented for sub-6 GHz MIMO communication. The dielectric resonator was fed through aperture feeding to achieve dual-band resonance. The DRA has the operating modes of TE01δ and TE10δ at 3.3 GHz and 3.9 GHz, respectively. The engineered antenna has port isolation of higher than 20 dB at the target frequencies without the employment of an extra isolation mechanism. Full-wave high-frequency simulation software was employed for the simulation computation. The antenna has a peak gain of 5.8 dBi and 6.2 dBi, and an efficiency of 88.6% and 90.2% at 3.3 GHz and 3.9 GHz, respectively. The proposed resonator has good MIMO diversity parameters. The optimal envelope correlation coefficient (ECC) is 0.01, channel capacity loss (CCL) is 0.1 bits/sec/Hz, and the total active reflection coefficient (TARC) is −22.46. The DRA elements are aligned orthogonally with adequate displacement for achieving polarization diversity and spatial diversity. The antenna delivers its applications in Sub-6 GHz 5G and WiMAX communications

Quad-port MIMO antenna with high isolation characteristics for sub 6-GHz 5G NR communication

Abstract A four-port MIMO antenna with high isolation is presented. The antenna is primarily envisioned to cover the n48 band of Frequency Range-1 (FR-1) with TDD duplex mode. The engineered antenna has electrical dimensions of 90 × 90 × 1.57 mm3. The size miniaturization of a single antenna unit is achieved through an optimized placement of slots and extended arms. The quad-antennas are then placed orthogonally to achieve antenna diversity. The antenna resonates at 3.56 GHz and 5.28 GHz having 2:1 VSWR fractional bandwidth of 1.82% and 2.12%. The proposed resonator provides 88.34% and 79.28% efficiency at lower and upper bands, respectively. The antenna is an exceptional radiator regarding MIMO diversity performance owing to high inter-element isolation. The values of envelope correlation coefficient < 0.05, channel capacity loss is nearly 0.1 bits/sec/Hz, and total active reflection coefficient is − 24.26. The full ground plane profile aids in high directivity and cross-pol isolation. The antenna exhibits a gain of 4.2 dBi and 2.8 dBi, respectively, justifying intended application requirements. There is a good coherence between simulation and experimental results. The self-decoupled antenna poses its application in 5G and WLAN Communication Applications

Performance analysis of quad-port UWB MIMO antenna system for Sub-6 GHz 5G, WLAN and X band communications

A quad-port Multiple Input Multiple Output Antenna with high isolation is presented in this paper. The MIMO design is intended to receive Ultra-Wide Band response to target various wireless applications. The engineered model has 40 x 40 × 1.6 mm3 electrical dimensions. A single antenna achieves size compactness due to an appropriate inclusion of vertical and horizontal conductive strips. Additionally, a diagonal radiating strip is shaped and pooled with the patch geometry. A similar design is positioned orthogonally with each other to receive diversified performance. The four conducting ports are positioned with an appropriate minimum distance to lower down the possible mutual coupling. A partial ground plane having border geometry has been incorporated to receive the ultra-wide band response. An additional plus-sign shaped conducting strips are provided and united with ground lines for isolation enhancement. The MIMO system exhibits ultra-wide frequency response from 3.20 GHz to 13.40 GHz with adequate isolation below −20 dB and an impedance bandwidth of 10.20 GHz. The proposed structure provides an overall gain of 2 dBi having above 80 % efficiency. The presented radiator exhibits excellent MIMO diversity response achieving minimal mutual coupling effect. The other output parameters such as envelope correlation coefficients<0.05, diversity gain of nearly 10 dB, mean effective gain<0.2 dB, and channel capacity loss<0.1 bits/sec/Hz were obtained. The proposed design has been simulated in High Frequency Structure Simulator (HFSS) software. The developed MIMO antenna has been analyzed through VNA N9912A. An encouraging correlation between the software generated and actual responses was observed. The strong agreement between actual results and software results shows the design potential for wireless communications. The highly isolated MIMO system registers its potential for sub-6 GHz 5G, WLAN, and X Band communications