Repair of Bulk-Fill and Nanohybrid Resin Composites: Effect of Surface Conditioning, Adhesive Promoters, and Long-Term Aging

The aim of the study was to investigate the effect of different repair procedures on the repair bond strength of bulk-fill and nanohybrid resin composites after different aging periods. The resin composite blocks (8 × 8 × 4 mm$^{3}$) were prepared from a bulk-fill (reliaFIL Bulk) and a nanohybrid (reliaFIL LC) resin composite and grouped according to aging duration (6 months, 1 year, and 2 years). Following aging, the blocks were assigned to different surface treatments; air-abrasion with aluminum oxide powder, roughening with a diamond bur, and no treatment. After cleansing with phosphoric acid, a silane layer (Porcelain Primer) was applied on the surface of half of the specimens in each group. The specimens were subdivided into two groups (n = 5): Scotchbond Universal (3M Oral Care) and All-Bond Universal (Bisco). The blocks were repaired with the nanohybrid composite (8 × 8 × 8 mm $^{3}$). The repaired specimens were stored in distilled water (37 °C/24 h) and segmented into beams. Half of the beams were immediately subjected to microtensile μTBS testing (1 mm/min), while the other half was stored in distilled water (37 °C) for 6 months before testing. Failure modes were analyzed using stereomicroscope and SEM. Statistical analyses were performed with ANOVA and least significant difference tests (LSD) tests (p = 0.05). The extension of aging periods (6 months, 1 year, and 2 years) reduced the repair bond strength in some groups for both resin composites (p < 0.05). The air-abrasion and bur roughening improved the repair bond strength (p < 0.05). The silane application did not influence the repair bond strength and durability (p > 0.05). There was no difference among the universal adhesives in the same surface treatment groups (p > 0.05). The mechanical roughening treatments are necessary for the repair of resin composite. The universal adhesives might be used for the repair of resin composites regardless of silane content without prior silane application

Color Change after 25% Hydrogen Peroxide Bleaching with Photoactivation: A Methodological Assessment Using Spectrophotometer versus Digital Photographs.

This study aimed to evaluate the color change of teeth bleached with light activation using two different objective color measurement approaches after two years of clinical follow-up. A cross-sectional retrospective clinical study according to STROBE was followed including 30 participants. The 25% hydrogen peroxide gel (Philips Zoom) was applied with a supplementary LED light for 15 min in four cycles. Tooth color was assessed based on CIEL*a*b* values using a spectrophotometer (Spectroshade) at different time points (baseline, post bleaching, 1 week, 1 year, and 2 years). Standardized digital photographs were taken at each time point. The L*, a*, and b* values were measured from the digital photographs using Adobe Photoshop software. The color difference (ΔE) was separately calculated using the L*, a*, and b* values obtained with spectrophotometric and photographic analyses at each evaluation time. Data were analyzed with non-parametric tests (p < 0.05). A color regression was detected by both measurement approaches after 1 and 2 years (p < 0.05). Greater ΔE values were acquired with the spectrophotometer compared to the digital photographic analysis (p < 0.05). Although a greater color change was observed with the spectrophotometer, both approaches were able to detect the color rebound using the 25% hydrogen peroxide light-activated in-office system. Digital photographic analysis might therefore be used to assess color change after bleaching

Repair of Bulk-Fill and Nanohybrid Resin Composites: Effect of Surface Conditioning, Adhesive Promoters, and Long-Term Aging.

The aim of the study was to investigate the effect of different repair procedures on the repair bond strength of bulk-fill and nanohybrid resin composites after different aging periods. The resin composite blocks (8 × 8 × 4 mm3) were prepared from a bulk-fill (reliaFIL Bulk) and a nanohybrid (reliaFIL LC) resin composite and grouped according to aging duration (6 months, 1 year, and 2 years). Following aging, the blocks were assigned to different surface treatments; air-abrasion with aluminum oxide powder, roughening with a diamond bur, and no treatment. After cleansing with phosphoric acid, a silane layer (Porcelain Primer) was applied on the surface of half of the specimens in each group. The specimens were subdivided into two groups (n = 5): Scotchbond Universal (3M Oral Care) and All-Bond Universal (Bisco). The blocks were repaired with the nanohybrid composite (8 × 8 × 8 mm 3). The repaired specimens were stored in distilled water (37 °C/24 h) and segmented into beams. Half of the beams were immediately subjected to microtensile μTBS testing (1 mm/min), while the other half was stored in distilled water (37 °C) for 6 months before testing. Failure modes were analyzed using stereomicroscope and SEM. Statistical analyses were performed with ANOVA and least significant difference tests (LSD) tests (p = 0.05). The extension of aging periods (6 months, 1 year, and 2 years) reduced the repair bond strength in some groups for both resin composites (p < 0.05). The air-abrasion and bur roughening improved the repair bond strength (p < 0.05). The silane application did not influence the repair bond strength and durability (p > 0.05). There was no difference among the universal adhesives in the same surface treatment groups (p > 0.05). The mechanical roughening treatments are necessary for the repair of resin composite. The universal adhesives might be used for the repair of resin composites regardless of silane content without prior silane application

Color Change after 25% Hydrogen Peroxide Bleaching with Photoactivation: A Methodological Assessment Using Spectrophotometer versus Digital Photographs

This study aimed to evaluate the color change of teeth bleached with light activation using two different objective color measurement approaches after two years of clinical follow-up. A cross-sectional retrospective clinical study according to STROBE was followed including 30 participants. The 25% hydrogen peroxide gel (Philips Zoom) was applied with a supplementary LED light for 15 min in four cycles. Tooth color was assessed based on CIEL*a*b* values using a spectrophotometer (Spectroshade) at different time points (baseline, post bleaching, 1 week, 1 year, and 2 years). Standardized digital photographs were taken at each time point. The L*, a*, and b* values were measured from the digital photographs using Adobe Photoshop software. The color difference (ΔE) was separately calculated using the L*, a*, and b* values obtained with spectrophotometric and photographic analyses at each evaluation time. Data were analyzed with non-parametric tests (p < 0.05). A color regression was detected by both measurement approaches after 1 and 2 years (p < 0.05). Greater ΔE values were acquired with the spectrophotometer compared to the digital photographic analysis (p < 0.05). Although a greater color change was observed with the spectrophotometer, both approaches were able to detect the color rebound using the 25% hydrogen peroxide light-activated in-office system. Digital photographic analysis might therefore be used to assess color change after bleaching

Immediate and Late Repair of Microhybrid Resin Composites: Effect of Silane Coupling Agent, Universal Adhesives and Photo Polymerization

This study investigated the effect of silane coupling agent and universal adhesive application on repair bond strength of resin-based composite after bur grinding. Microhybrid resin composite (Charisma Smart) blocks (N=80; 8x8x4 mm3) were prepared, aged (37°C; 1 month), roughened, etched and randomly divided into two groups. Silane was applied to half of the groups (Porcelain Primer, Bisco), before one of the following universal primers/adhesives was applied: a) Scotchbond Universal (3M), b) All-Bond Universal (Bisco), c) G-Premio Bond (GC), and d) Clearfil SE Bond (Kuraray). In each adhesive group half of the group was photo-polymerized. The blocks were repaired with the same size resin composite and segmented into beams. Half of the beams were subjected to micro-tensile bond test (1 mm/min), while the other half was aged (37°C; 6 months) prior to testing. Failure modes were analyzed using Scanning Electron Microscopy (SEM). Data were analyzed using repeated measures of ANOVA, Tukey's post-hoc, and paired t-tests (alpha=0.05). The silane application did not affect the repair bond strength regardless of photo-polymerization of the adhesive resin. The repair bond strength decreased significantly after 6 months when adhesive resin was not photopolymerized (p⟨0.05). Photo-polymerizing universal adhesives might ensure higher repair bond strength and its maintenance after aging