1,461 research outputs found

    Core-Level X-Ray Photoemission Satellites in Ruthenates: A New Mechanism Revealing the Mott Transition

    Full text link
    Ru 3d core-level x-ray photoemission spectra of various ruthenates are examined. They show in general two-peak structures, which can be assigned as the screened and unscreened peaks. The screened peak is absent in a Mott insulator, but develops into a main peak in the metallic regime. This spectral behavior is well explained by the dynamical mean-field theory calculation for the single-band Hubbard model with on-site core-hole potential using the exact diagonalization method. The new mechanism of the core-level photoemission satellite can be utilized to reveal the Mott transition phenomenon in various strongly correlated electron systems, especially in nano-scale devices and phase-separated materials.Comment: 4 pages, 5 figures, submitted to PR

    Electronic Structure and Phase Transition in V2O3: Importance of 3d Spin-Orbit Interaction and Lattice Distortion

    Full text link
    The 3d electronic structure and phase transition in pure and Cr doped V2O3 are theoretically investigated in relation to the 3d spin-orbit interaction and lattice distortion. A model consisting of the nearest-neighbor V ion pair with full degeneracy of the 3d orbitals is studied within the many-body point of view. It is shown that each V ion with S=1 spin state has a large orbital magnetic moment 0.7μB\sim 0.7 \mu_{\rm B} and no orbital ordering occurs in the antiferromagnetic insulating (AFI) phase. The anomalous resonant Bragg reflection found in the AFI phase is attributed to the magnetic ordering. In the AFI and paramagnetic insulating (PI) phases, Jahn-Teller like lattice instability leads to tilting of the V ion pairs from the corundum c-axis and this causes large difference in the orbital occupation between the paramagnetic metal and the insulating phases, which is consistent with linear dichroic V 2p XAS measurements. To understand the AFI to PI transition, a model spin Hamiltonian is also proposed. The transition is found to be simultaneous order-disorder transition of the magnetic moments and tilting directions of the V ion pairs. Softening of elastic constant C44 and abrupt change in short range spin correlations observed at the transition are also explained.Comment: 18 pages, 16 figure

    Electronic Structure and Valence Band Spectra of Bi4Ti3O12

    Full text link
    The x-ray photoelectron valence band spectrum and x-ray emission valence-band spectra (Ti K _beta_5, Ti L_alpha, O K_alpha) of Bi4Ti3O12 are presented (analyzed in the common energy scale) and interpreted on the basis of a band-structure calculation for an idealized I4/mmm structure of this material.Comment: 6 pages + 7 PostScript figures, RevTex3.0, to be published in Phys.Rev.B52 (Oct.95). Figures also available via anonymous ftp at ftp://ftp.physik.uni-osnabrueck.de/pub/apostnik/BiTiO

    Current Methods to Unravel the Functional Properties of Lysosomal Ion Channels and Transporters

    Get PDF
    open18siA distinct set of channels and transporters regulates the ion fluxes across the lysosomal membrane. Malfunctioning of these transport proteins and the resulting ionic imbalance is involved in various human diseases, such as lysosomal storage disorders, cancer, as well as metabolic and neurodegenerative diseases. As a consequence, these proteins have stimulated strong interest for their suitability as possible drug targets. A detailed functional characterization of many lysosomal channels and transporters is lacking, mainly due to technical difficulties in applying the standard patch-clamp technique to these small intracellular compartments. In this review, we focus on current methods used to unravel the functional properties of lysosomal ion channels and transporters, stressing their advantages and disadvantages and evaluating their fields of applicability.openFesta M.; Minicozzi V.; Boccaccio A.; Lagostena L.; Gradogna A.; Qi T.; Costa A.; Larisch N.; Hamamoto S.; Pedrazzini E.; Milenkovic S.; Scholz-Starke J.; Ceccarelli M.; Vitale A.; Dietrich P.; Uozumi N.; Gambale F.; Carpaneto A.Festa, M.; Minicozzi, V.; Boccaccio, A.; Lagostena, L.; Gradogna, A.; Qi, T.; Costa, A.; Larisch, N.; Hamamoto, S.; Pedrazzini, E.; Milenkovic, S.; Scholz-Starke, J.; Ceccarelli, M.; Vitale, A.; Dietrich, P.; Uozumi, N.; Gambale, F.; Carpaneto, A

    Band Calculations for Ce Compounds with AuCu3_{3}-type Crystal Structure on the basis of Dynamical Mean Field Theory I. CePd3_{3} and CeRh3_{3}

    Full text link
    Band calculations for Ce compounds with the AuCu3_{3}-type crystal structure were carried out on the basis of dynamical mean field theory (DMFT). The auxiliary impurity problem was solved by a method named NCAf2f^{2}vc (noncrossing approximation including the f2f^{2} state as a vertex correction). The calculations take into account the crystal-field splitting, the spin-orbit interaction, and the correct exchange process of the f1f0,f2f^{1} \rightarrow f^{0},f^{2} virtual excitation. These are necessary features in the quantitative band theory for Ce compounds and in the calculation of their excitation spectra. The results of applying the calculation to CePd3_{3} and CeRh3_{3} are presented as the first in a series of papers. The experimental results of the photoemission spectrum (PES), the inverse PES, the angle-resolved PES, and the magnetic excitation spectra were reasonably reproduced by the first-principles DMFT band calculation. At low temperatures, the Fermi surface (FS) structure of CePd3_{3} is similar to that of the band obtained by the local density approximation. It gradually changes into a form that is similar to the FS of LaPd3_{3} as the temperature increases, since the 4f4f band shifts to the high-energy side and the lifetime broadening becomes large.}Comment: 12 pasges, 13 figure

    Performance studies of the Belle II Silicon Vertex Detector with data taken at the DESY test beam in April 2016

    Get PDF
    Belle II is a multipurpose detector currently under construction which will be operated at the next generation B-factory SuberKEKB in Japan. Its main devices for the vertex reconstruction are the Silicon Vertex Detector (SVD) and the Pixel Detector (PXD). In April 2016 a sector of the Belle II SVD and PXD have been tested in a beam of high energetic electrons at the test beam facility at DESY Hamburg (Germany). We report here the results for the hit efficiency estimation and the measurement of the resolution for the Belle II silicon vertex etector. We find that the hit efficiencies are on average above 99.5% and that the measured resolution is within the expectations

    The Belle II SVD detector

    Get PDF
    The Silicon Vertex Detector (SVD) is one of the main detectors in the Belle II experiment at KEK, Japan. In combination with a pixel detector, the SVD determines precise decay vertex and low-momentum track reconstruction. The SVD ladders are being developed at several institutes. For the development of the tracking algorithm as well as the performance estimation of the ladders, beam tests for the ladders were performed. We report an overview of the SVD development, its performance measured in the beam test, and the prospect of its assembly and commissioning until installation

    Performance studies of the Belle II Silicon Vertex Detector with data taken at the DESY test beam in April 2016

    Get PDF
    Belle II is a multipurpose detector currently under construction which will be operated at the next generation B-factory SuberKEKB in Japan. Its main devices for the vertex reconstruction are the Silicon Vertex Detector (SVD) and the Pixel Detector (PXD). In April 2016 a sector of the Belle II SVD and PXD have been tested in a beam of high energetic electrons at the test beam facility at DESY Hamburg (Germany). We report here the results for the hit efficiency estimation and the measurement of the resolution for the Belle II silicon vertex etector. We find that the hit efficiencies are on average above 99.5% and that the measured resolution is within the expectations

    X-ray absorption spectroscopy study of diluted magnetic semiconductors: Zn1-xMxSe (M = Mn, Fe, Co) and Zn1-xMnxY (Y = Se, Te)

    Full text link
    We have investigated 3d electronic states of doped transition metals in II-VI diluted magnetic semiconductors, Zn1-xMxSe (M = Mn, Fe, Co) and Zn1-xMnxY (Y = Se, Te), using the transition-metal L2,3-edge X-ray absorption spectroscopy (XAS) measurements. In order to explain the XAS spectra, we employed a tetragonal cluster model calculation, which includes not only the full ionic multiplet structure but also configuration interaction (CI). The results show that CI is essential to describe the experimental spectra adequately, indicating the strong hybridization between the transition metal 3d and the ligand p orbitals. In the study of Zn1-xMnxY (Y = Se, Te), we also found considerable spectral change in the Mn L2,3-edge XAS spectra for different ligands, confirming the importance of the hybridization effects in these materials.Comment: This paper consists of 22 pages including 4 figures. This paper is submitted to Physical Review

    Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter

    Get PDF
    A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's performance is presented in terms of the linearity and resolution of the energy measurement. These results represent an important milestone in the development of highly granular calorimeters using scintillator strip technology. This technology is being developed for a future linear collider experiment, aiming at the precise measurement of jet energies using particle flow techniques
    corecore