Wind tunnel wall interference in V/STOL and high lift testing: A selected, annotated bibliography

This bibliography, with abstracts, consists of 260 citations of interest to persons involved in correcting aerodynamic data, from high lift or V/STOL type configurations, for the interference arising from the wind tunnel test section walls. It provides references which may be useful in correcting high lift data from wind tunnel to free air conditions. References are included which deal with the simulation of ground effect, since it could be viewed as having interference from three tunnel walls. The references could be used to design tests from the standpoint of model size and ground effect simulation, or to determine the available testing envelope with consideration of the problem of flow breakdown. The arrangement of the citations is chronological by date of publication in the case of reports or books, and by date of presentation in the case of papers. Included are some documents of historical interest in the development of high lift testing techniques and wall interference correction methods. Subject, corporate source, and author indices, by citation numbers, have been provided to assist the users. The appendix includes citations of some books and documents which may not deal directly with high lift or V/STOL wall interference, but include additional information which may be helpful

Resonant cavity enhanced detectors embedded in photonic crystals

Cataloged from PDF version of article.We report a resonant cavity enhanced (RCE) detector built around a three-dimensional photonic band gap crystal. The RCE detector was built by placing a monopole antenna within the localized modes of planar and boxlike defectstructures. The enhanced electric field around these defectstructures were then measured by a microwave detector and a network analyzer. We measured a power enhancement factor of 3450 for planar cavity structures. A Fabry–Perot cavity model was used to understand and predict resonant cavity enhancement in this structure. The tuning bandwidth of the RCE detector extends from 10.5 to 12.8 GHz, which corresponds to the full photonic band gap by the crystal. These RCE detectors have increased sensitivity and efficiency when compared to conventional detectors, and can be used for various applications. © 1998 American Institute of Physic

Mathematical Model and Experimental Results for Cryogenic Densification and Sub-Cooling Using a Submerged Cooling Source

Among the many factors that determine overall rocket performance, propellant density is important because it affects the size of the rocket. Thus, in order to decrease the size of a rocket, it may be desirable to increase the density of propellants. This study analyzes the concept of increasing the propellant density by employing a cooling source submerged in the liquid propellant. A simple, mathematical model was developed to predict the rate of densification and the propellant temperature profile. The mathematical model is generic and applicable to multiple propellants. The densification rate was determined experimentally by submerging a cooling source in liquid oxygen at constant, positive pressure, and measuring the time rate of change in temperature with respect to vertical position. The results from the mathematical model provided a reasonable fit when compared to experimental results

Model checking boot code from AWS data centers

© 2020, The Author(s). This paper describes our experience with symbolic model checking in an industrial setting. We have proved that the initial boot code running in data centers at Amazon Web Services is memory safe, an essential step in establishing the security of any data center. Standard static analysis tools cannot be easily used on boot code without modification owing to issues not commonly found in higher-level code, including memory-mapped device interfaces, byte-level memory access, and linker scripts. This paper describes automated solutions to these issues and their implementation in the C Bounded Model Checker (CBMC). CBMC is now the first source-level static analysis tool to extract the memory layout described in a linker script for use in its analysis

Effects of amino acids and glucose on mesangial cell aminopeptidase a and angiotensin receptors

Effects of amino acids and glucose on mesangial cell aminopeptidase a and angiotensin receptors.BackgroundHigh protein diets and diabetes increase renal renin angiotensin system (RAS) activity, which is associated with glomerular injury. Aminopeptidase A (APA) is a cell surface metalloprotease that degrades angiotensin II (AII) in the mesangium. Mesangial cells (MC) also possess receptors for AII; the type 1 (AT1 receptor) promotes proliferation and fibrosis, while the type 2 (AT2 receptor) opposes these effects. We evaluated whether amino acids and glucose alter expression of APA, AT1 receptor and AT2 receptor in a manner that further augments RAS activity.MethodsConfluent rat MC were grown in serum-free media for 48 hours prior to exposing to experimental conditions: control (C), high amino acids (HA, mixed amino acid solution added to raise concentrations 5- to 6-fold over C), high glucose (HG 30, mM glucose). Semi-quantitative RT-PCR was used to assess mRNA for APA, AT1 receptor, AT2 receptor, and β-actin. Values are expressed relative to βbgr; actin.ResultsBoth HA and HG reduced APA mRNA (HG 1.13 ± 0.19, HA 1.12 ± 0.16 versus C 1.27 ± 0.16 P < 0.05, N = 8). HA increased AT1 receptor mRNA (HA 2.11 ± 0.43 versus C 1.14 ± 0.28 P < 0.05, N = 8). HG increased AT2 receptor mRNA (HG 1.31 ± 0.43 versus C 0.82 ± 0.33 P < 0.05, N = 6).ConclusionsA reduction of APA, in response to high levels of amino acids or glucose, could contribute to increased AII as a result of decreased degradation in MC. The effect of amino acids to increase AT1 receptor expression may further enhance adverse hemodynamic and pro-fibrotic actions of AII. Conversely, glucose increased AT2 receptor expression, which could modulate responses mediated by the AT1 receptor

Neutron-Unbound Excited States of 23N

Neutron unbound states in 23N were populated via proton knockout from an 83.4 MeV/nucleon 24O beam on a liquid deuterium target. The two-body decay energy displays two peaks at E1∼100keV and E2∼1MeV with respect to the neutron separation energy. The data are consistent with shell model calculations predicting resonances at excitation energies of ∼3.6MeV and ∼4.5MeV. The selectivity of the reaction implies that these states correspond to the first and second 3/2− states. The energy of the first state is about 1.3 MeV lower than the first excited 2+ in 24O. This decrease is largely due to coupling with the πp−13/2 hole along with a small reduction of the N=16 shell gap in 23N

NASA Space Flight Vehicle Fault Isolation Challenges

The Space Launch System (SLS) is the new NASA heavy lift launch vehicle and is scheduled for its first mission in 2017. The goal of the first mission, which will be uncrewed, is to demonstrate the integrated system performance of the SLS rocket and spacecraft before a crewed flight in 2021. SLS has many of the same logistics challenges as any other large scale program. Common logistics concerns for SLS include integration of discrete programs geographically separated, multiple prime contractors with distinct and different goals, schedule pressures and funding constraints. However, SLS also faces unique challenges. The new program is a confluence of new hardware and heritage, with heritage hardware constituting seventy-five percent of the program. This unique approach to design makes logistics concerns such as testability of the integrated flight vehicle especially problematic. The cost of fully automated diagnostics can be completely justified for a large fleet, but not so for a single flight vehicle. Fault detection is mandatory to assure the vehicle is capable of a safe launch, but fault isolation is another issue. SLS has considered various methods for fault isolation which can provide a reasonable balance between adequacy, timeliness and cost. This paper will address the analyses and decisions the NASA Logistics engineers are making to mitigate risk while providing a reasonable testability solution for fault isolation

Photonic crystal-based resonant antenna with a very high directivity

Cataloged from PDF version of article.We investigate the radiation properties of an antenna that was formed by a hybrid combination of a monopole radiation source and a cavity built around a dielectric layer-by-layer three-dimensional photonic crystal. We measured a maximum directivity of 310, and a power enhancement of 180 at the resonant frequency of the cavity. We observed that the antenna has a narrow bandwidth determined by the cavity, where the resonant frequency can be tuned within the band gap of the photonic crystal. The measured radiation patterns agree well with our theoretical results. (C) 2000 American Institute of Physic