Effects of Metal Ions on the Reactivity and Corrosion Electrochemistry of Fe/FeS Nanoparticles

Nano-zerovalent iron (nZVI) formed under sulfidic conditions results in a biphasic material (Fe/FeS) that reduces trichloroethene (TCE) more rapidly than nZVI associated only with iron oxides (Fe/FeO). Exposing Fe/FeS to dissolved metals (Pd2+, Cu2+, Ni2+, Co2+, and Mn2+) results in their sequestration by coprecipitation as dopants into FeS and FeO and/or by electroless precipitation as zerovalent metals that are hydrogenation catalysts. Using TCE reduction rates to probe the effect of metal amendments on the reactivity of Fe/FeS, it was found that Mn2+ and Cu2+ decreased TCE reduction rates, while Pd2+, Co2+, and Ni2+ increased them. Electrochemical characterization of metal-amended Fe/FeS showed that aging caused passivation by growth of FeO and FeS phases and poisoning of catalytic metal deposits by sulfide. Correlation of rate constants for TCE reduction (k(obs)) with electrochemical parameters (corrosion potentials and currents, Tafel slopes, and polarization resistance) and descriptors of hydrogen activation by metals (exchange current density for hydrogen reduction and enthalpy of solution into metals) showed the controlling process changed with aging. For fresh Fe/FeS, k(obs) was best described by the exchange current density for activation of hydrogen, whereas k(obs) for aged Fe/FeS correlated with electrochemical descriptors of electron transfer.X112619sciescopu

Reactivity of Fe/FeS Nanoparticles: Electrolyte Composition Effects on Corrosion Electrochemistry

Zerovalent iron nanoparticles (Fe-0 NPs or nZVI) synthesized by reductive precipitation in aqueous solution (Fe/FeO) differ in composition and reactivity from the NPs obtained by reductive precipitation in the presence of a S-source such as dithionite (Fe/FeS). To compare the redox properties of these types of NPs under a range of environmentally relevant solution conditions, stationary powder disk electrodes (PDEs) made from Fe/FeO and Fe/FeS were characterized using a series of complementary electrochemical techniques: open-circuit chronopotentiometry (CP), linear polarization resistance (LPR), electrochemical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV). The passive films on these materials equilibrate within minutes of first immersion and do not show further breakdown until >1 day of exposure. During this period, the potentials and currents measured by LPR and LSV suggest that Fe/FeS undergoes more rapid corrosion and is more strongly influence by solution chemical conditions than Fe/FeO. Chloride containing media were strongly activating and natural organic mildly passivating for both materials. These effects were also seen in the impedance data obtained by EIS, and equivalent circuit modeling of the electrodes composed of these powders suggested that the higher reactivity of Fe/FeS is due to greater abundance of defects in its passive film.X112421sciescopu