The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA

3D tooth models were virtually restored: flowable composite resin + bulk-fill composite (A), glass ionomer cement + bulk-fill composite (B) or adhesive + bulk-fill composite (C). Polymerization shrinkage and masticatory loads were simulated. All models exhibited the highest stress concentration at the enamel–restoration interfaces. A and C showed similar pattern with lower magnitude in A in comparison to C. B showed lower stress in dentine and C the highest cusps displacement. The use of glass ionomer cement or flowable composite resin in combination with a bulk-fill composite improved the biomechanical behavior of deep class II MO cavities

The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA

3D tooth models were virtually restored: flowable composite resin + bulk-fill composite (A), glass ionomer cement + bulk-fill composite (B) or adhesive + bulk-fill composite (C). Polymerization shrinkage and masticatory loads were simulated. All models exhibited the highest stress concentration at the enamel-restoration interfaces. A and C showed similar pattern with lower magnitude in A in comparison to C. B showed lower stress in dentine and C the highest cusps displacement. The use of glass ionomer cement or flowable composite resin in combination with a bulk-fill composite improved the biomechanical behavior of deep class II MO cavities

COVID-19 and the impact on the cranio-oro-facial trauma care in Italy: An epidemiological retrospective cohort study

The coronavirus disease 2019 (COVID-19) has deeply modified the organization of hospitals, health care centers, and the patient’s behavior. The aim of this epidemiological retrospective cohort study is to evaluate if and how the COVID-19 pandemic has determined a modification in cranio-oro-facial traumatology service. Methods: The dataset included hospital emergency room access of a six-month pre-pandemic period and six months into pandemic outbreak. The variables collected were: patient age, gender, type of emergency access with relative color code, Glasgow Coma Scale Score, type of discharge. Results: 537 vs 237 (pre-pandemic vs pandemic) patients accessed the hospital emergency room and the mean age decreased from 60.79 ± 25.34 to 56.75 ± 24.50 year. Yellow and green code access went from 28.9% and 66.1% to 37.5% and 57.7% (pre-pandemic vs pandemic). Glasgow Coma Scale (GCS) shows an increase of 16.6% vs 27.8% of 15 grade score, a 28.7% vs 28.5% of the 14 grade score and reduction of 13 and 12 grade 40.2% and 14.5% vs 37.1 and 9.7% (pre-pandemic vs pandemic). Conclusions: Since the COVID-19 outbreak continues, epidemiological data are still necessary to perform public health intervention strategies and to appropriately predict the population needs, in order to properly manage the COVID-19 related to oral pathologies as well as the most common health problems

The influence of custom-milled framework design for an implant-supported full-arch fixed dental prosthesis: 3D-FEA sudy

The current study aimed to evaluate the mechanical behavior of two different maxillary prosthetic rehabilitations according to the framework design using the Finite Element Analysis. An implant-supported full-arch fixed dental prosthesis was developed using a modeling software. Two conditions were modeled: a conventional casted framework and an experimental prosthesis with customized milled framework. The geometries of bone, prostheses, implants and abutments were modeled. The mechanical properties and friction coefficient for each isotropic and homogeneous material were simulated. A load of 100 N load was applied on the external surface of the prosthesis at 30° and the results were analyzed in terms of von Mises stress, microstrains and displacements. In the experimental design, a decrease of prosthesis displacement, bone strain and stresses in the metallic structures was observed, except for the abutment screw that showed a stress increase of 19.01%. The conventional design exhibited the highest stress values located on the prosthesis framework (29.65 MPa) between the anterior implants, in comparison with the experimental design (13.27 MPa in the same region). An alternative design of a stronger framework with lower stress concentration was reported. The current study represents an important step in the design and analysis of implant-supported full-arch fixed dental prosthesis with limited occlusal vertical dimension

Loading stress distribution in posterior teeth restored by different core materials under fixed zirconia partial denture: A 3d-fea study

Purpose: To evaluate the effect of different substrate stiffness [sound dentin (SD), resin composite core (RC) or metal core (MC)] on the stress distribution of a zirconia posterior three-unit fixed partial denture (FPD). Methods: The abutment teeth (first molar and first premolar) were modeled, containing 1.5 mm of axial reduction, and converging axial walls. A static structural analysis was performed using a finite element method and the maximum principal stress criterion to analyze the fixed partial denture (FPD) and the cement layers of both abutment teeth. The materials were considered isotropic, linear, elastic, homogeneous and with bonded contacts. An axial load (300 N) was applied to the occlusal surface of the second premolar. Results: The region of the prosthetic connectors showed the highest tensile stress magnitude in the FPD structure depending on the substrate stiffness with different core materials. The highest stress peak was observed with the use of MC (116.4 MPa) compared to RC and SD. For the cement layer, RC showed the highest values in the molar abutment (14.7 MPa) and the highest values for the premolar abutment (14.4 MPa) compared to SD (14.1 and 13.4 MPa) and MC (13.8 and 13.3 MPa). Both metal core and resin composite core produced adequate stress concentration in the zirconia fixed partial denture during the load incidence. However, more flexible substrates, such as composite cores, can increase the tensile stress magnitude on the cement

Stress distribution in resin-based CAD-CAM implant-supported crowns

Objective: This study aimed to evaluate the influence of new resin-based CAD-CAM implant-supported materials on posterior crown restoration stress and strain concentrations. Methods: A previous 3D implant model was edited to receive a cement-retained posterior crown manufactured with different CAD/CAM materials (Estelite P Block, Estelite Block II or Estelite Layered Block). Each solid model was exported to the computer-aided engineering software and submitted to the finite element analysis of stress and strain. Material properties were assigned to each solid with isotropic and homogeneous behavior according to the manufacturer information. A vertical load of 600 N was applied in the occlusal region of the crown, via a simulated food bolus, and stress was calculated in Von Misses (σVM) for the implant, abutment and screw, Maximum (σMAX) Principal Stresses for the crown and microstrain for the bone. Results: All simulated materials showed acceptable stresses levels with a similar stress pattern among the models. At the crown intaglio region and cement layer, however, differences were observed: Estelite P Block showed a lower tensile and shear stresses magnitude when compared to other resin-based materials with lower elastic modulus. Significance: The stress effect of different resin-based CAD-CAM implant-supported crowns is predominant in the crown and cement layer, with Estelite P Block showing 7.4 % versus 9.3 % and 9.2 % for Estelite Block II and Estelite Layered Block of crown failure risk

Influence of Ceramic Materials on Biomechanical Behavior of Implant Supported Fixed Prosthesis with Hybrid Abutment

PURPOSE This study evaluated the stress distribution in different cement-retained implant-supported prostheses with a hybrid abutment. MATERIALS AND METHODS Two factors were evaluated: restorative material for the crown and hybrid abutment - zirconia, lithium disilicate and hybrid ceramic, yielding 9 combinations. For finite element analysis, a monolithic crown cemented on a hybrid abutment was modeled and cemented on a titanium base (Ti base). An oblique load (45°, 300 N) was applied to the fossa bottom and system fixation occurred on the bone's base. RESULTS Each structure was evaluated separately to find the possible weaknesses in geometry and failure criteria. In this context, results demonstrated a significant decrease of maximum principal and von-Mises stresses concentration when crowns with high elastic modulus are cemented onto a hybrid abutment with lower elastic modulus. CONCLUSIONS Considering this theoretical study for a Morse taper implant, the association of a rigid crown with a more resilient hybrid abutment reduces the tensile stress concentration in the restoration cervical region

The role of cortical zone level and prosthetic platform angle in dental implant mechanical response: A 3D finite element analysis

Objective: The aim of this study was to evaluate the influence of three different dental implant neck geometries, under a combined compressive/shear load using finite element analysis (FEA). The implant neck was positioned in D2 quality bone at the crestal level or 2 mm below. Methods: One dental implant (4.2 × 9 mm) was digitized by reverse engineering techniques using micro CT and imported into Computer Aided Design (CAD) software. Non-uniform rational B-spline surfaces were reconstructed, generating a 3D volumetric model similar to the digitized implant. Three different models were generated with different implant neck configurations, namely 0°, 10° and 20°. D2 quality bone, composed of cortical and trabecular structure, was modeled using data from CT scans. The implants were included in the bone model using a Boolean operation. Two different fixture insertion depths were simulated for each implant: 2 mm below the crestal bone and exactly at the level of the crestal bone. The obtained models were imported to FEA software in STEP format. Von Mises equivalent strains were analyzed for the peri-implant D2 bone type, considering the magnitude and volume of the affected surrounding cortical and trabecular bone. The highest strain values in both cortical and trabecular tissue at the peri-implant bone interface were extracted and compared. Results: All implant models were able to distribute the load at the bone-implant contact (BIC) with a similar strain pattern between the models. At the cervical region, however, differences were observed: the models with 10° and 20° implant neck configurations (Model B and C), showed a lower strain magnitude when compared to the straight neck (Model A). These values were significantly lower when the implants were situated at crestal bone levels. In the apical area, no differences in strain values were observed. Significance: The implant neck configuration influenced the strain distribution and magnitude in the cortical bone and cancellous bone tissues. To reduce the strain values and improve the load dissipation in the bone tissue, implants with 10° and 20 neck configuration should be preferred instead of straight implant platforms