Atmospheric pressure glow discharge for CO2 conversion : model-based exploration of the optimum reactor configuration

We investigate the performance of an atmospheric pressure glow discharge (APGD) reactor for CO2 conversion in three different configurations, through experiments and simulations. The first (basic) configuration utilizes the well-known pin-to-plate design, which offers a limited conversion. The second configuration improves the reactor performance by employing a vortex-flow generator. The third, "confined" configuration is a complete redesign of the reactor, which encloses the discharge in a limited volume, significantly surpassing the conversion rate of the other two designs. The plasma properties are investigated using an advanced plasma model

Non-indigenous scale insects on ornamental plants in Bulgaria and China: A survey

Παρουσιάζεται μια προκαταρκτική λίστα από μη ιθαγενή κοκκοειδή είδη σε καλλωπιστικά φυτά στην Βουλγαρία και την Κίνα. Η δειγματοληψία πραγματοποιήθηκε μεταξύ Απριλίου και Νοεμβρίου, 2009, στο πλαίσιο του προγράμματος “Επεκτατικά αλλόχθονα κοκκοειδή έντομα σε καλλωπιστικά φυτά στην Βουλγαρία και την Κίνα”. Τα έντομα συλλέχθηκαν από φυτώρια, πάρκα, κήπους, βοτανικές συλλογές και θερμοκήπια. Είδη από 4 οικογένειες βρέθηκαν στην Βουλγαρία. Τα περισσότερα είδη ανήκουν στην οικογένεια Diaspididae (οκτώ είδη), στην οι- κογένεια Coccidae βρέθηκαν τέσσερα είδη, στην οικογένεια Pseudococcidae δύο είδη και στην οικογένεια Margarodidae ένα είδος. Τρία είδη μη ιθαγενών κοκκοειδών εντόμων σε καλλωπι- στικά φυτά βρέθηκαν κατά τις δειγματοληψίες στην Κίνα. Τα τρία είδη ανήκουν στην οικογένεια Pseudococcidae.A preliminary list of non-indigenous scale insect species on ornamental plants in Bulgaria and China is presented. The sampling was done between April and November, 2009, in the framework of the project “Invasive scale insects on ornamental plants in Bulgaria and China”. The insects were collected in nurseries, parks, gardens, botanical collections and greenhouses. Representatives from four families have been identified in Bulgaria, the most numerous of which are the Diaspididae (eight species), Coccidae (four species), Pseudococcidae (two species) and Margarodidae (one species). Three species of non-indigenous scale insects associated with ornamental plants were collected in China, all belonging to the family Pseudococcidae. A list of alien scale insect species on ornamental plants is given, including the sampling sites, host plants on which they were found, origin and first report in both countries

Carbon bed post-plasma to enhance the CO2 conversion and remove O-2 from the product stream

CO2 conversion by plasma technology is gaining increasing interest. We present a carbon (charcoal) bed placed after a Gliding Arc Plasmatron (GAP) reactor, to enhance the CO2 conversion, promote O/Ov removal and increase the CO fraction in the exhaust mixture. By means of an innovative (silo) system, the carbon is constantly supplied, to avoid carbon depletion upon reaction with O/O-2. Using this carbon bed, the CO2 conversion is enhanced by almost a factor of two (from 7.6 to 12.6%), while the CO concentration even increases by a factor of three (from 7.2 to 21.9%), and O-2 is completely removed from the exhaust mixture. Moreover, the energy efficiency of the conversion process drastically increases from 27.9 to 45.4%, and the energy cost significantly drops from 41.9 to 25.4 kJ.L-1. We also present the temperature as a function of distance from the reactor outlet, as well as the CO2, CO and O-2 concentrations and the temperature in the carbon bed as a function of time, which is important for understanding the underlying mechanisms. Indeed, these time-resolved measurements reveal that the initial enhancements in CO2 conversion and in CO concentration are not maintained in our current setup. Therefore, we present a model to study the gasification of carbon with different feed gases (i.e., O-2, CO and CO2 separately), from which we can conclude that the oxygen coverage at the surface plays a key role in determining the product composition and the rate of carbon consumption. Indeed, our model insights indicate that the drop in CO2 conversion and in CO concentration after a few minutes is attributed to deactivation of the carbon bed, due to rapid formation of oxygen complexes at the surface

Carbon bed post-plasma to enhance the CO2 conversion and remove O2 from the product stream

CO2 conversion by plasma technology is gaining increasing interest. We present a carbon (charcoal) bed placed after a Gliding Arc Plasmatron (GAP) reactor, to enhance the CO2 conversion, promote O/O2 removal and increase the CO fraction in the exhaust mixture. By means of an innovative (silo) system, the carbon is constantly supplied, to avoid carbon depletion upon reaction with O/O2. Using this carbon bed, the CO2 conversion is enhanced by almost a factor of two (from 7.6 to 12.6%), while the CO concentration even increases by a factor of three (from 7.2 to 21.9%), and O2 is completely removed from the exhaust mixture. Moreover, the energy efficiency of the conversion process drastically increases from 27.9 to 45.4%, and the energy cost significantly drops from 41.9 to 25.4 kJ.L−1. We also present the temperature as a function of distance from the reactor outlet, as well as the CO2, CO and O2 concentrations and the temperature in the carbon bed as a function of time, which is important for understanding the underlying mechanisms. Indeed, these time-resolved measurements reveal that the initial enhancements in CO2 conversion and in CO concentration are not maintained in our current setup. Therefore, we present a model to study the gasification of carbon with different feed gases (i.e., O2, CO and CO2 separately), from which we can conclude that the oxygen coverage at the surface plays a key role in determining the product composition and the rate of carbon consumption. Indeed, our model insights indicate that the drop in CO2 conversion and in CO concentration after a few minutes is attributed to deactivation of the carbon bed, due to rapid formation of oxygen complexes at the surface

Carbon bed post-plasma to enhance the CO2 conversion and remove O2 from the product stream

CO2 conversion by plasma technology is gaining increasing interest. We present a carbon (charcoal) bed placed after a Gliding Arc Plasmatron (GAP) reactor, to enhance the CO2 conversion, promote O/O2 removal and increase the CO fraction in the exhaust mixture. By means of an innovative (silo) system, the carbon is constantly supplied, to avoid carbon depletion upon reaction with O/O2. Using this carbon bed, the CO2 conversion is enhanced by almost a factor of two (from 7.6 to 12.6%), while the CO concentration even increases by a factor of three (from 7.2 to 21.9%), and O2 is completely removed from the exhaust mixture. Moreover, the energy efficiency of the conversion process drastically increases from 27.9 to 45.4%, and the energy cost significantly drops from 41.9 to 25.4 kJ.L−1. We also present the temperature as a function of distance from the reactor outlet, as well as the CO2, CO and O2 concentrations and the temperature in the carbon bed as a function of time, which is important for understanding the underlying mechanisms. Indeed, these time-resolved measurements reveal that the initial enhancements in CO2 conversion and in CO concentration are not maintained in our current setup. Therefore, we present a model to study the gasification of carbon with different feed gases (i.e., O2, CO and CO2 separately), from which we can conclude that the oxygen coverage at the surface plays a key role in determining the product composition and the rate of carbon consumption. Indeed, our model insights indicate that the drop in CO2 conversion and in CO concentration after a few minutes is attributed to deactivation of the carbon bed, due to rapid formation of oxygen complexes at the surface

Revealing the arc dynamics in a gliding arc plasmatron:A better insight to improve CO\u3csub\u3e2\u3c/sub\u3e conversion

\u3cp\u3eA gliding arc plasmatron (GAP) is very promising for CO\u3csub\u3e2\u3c/sub\u3e conversion into value-added chemicals, but to further improve this important application, a better understanding of the arc behavior is indispensable. Therefore, we study here for the first time the dynamic arc behavior of the GAP by means of a high-speed camera, for different reactor configurations and in a wide range of operating conditions. This allows us to provide a complete image of the behavior of the gliding arc. More specifically, the arc body shape, diameter, movement and rotation speed are analyzed and discussed. Clearly, the arc movement and shape relies on a number of factors, such as gas turbulence, outlet diameter, electrode surface, gas contraction and buoyance force. Furthermore, we also compare the experimentally measured arc movement to a state-of-the-art 3D-plasma model, which predicts the plasma movement and rotation speed with very good accuracy, to gain further insight in the underlying mechanisms. Finally, we correlate the arc dynamics with the CO\u3csub\u3e2\u3c/sub\u3e conversion and energy efficiency, at exactly the same conditions, to explain the effect of these parameters on the CO\u3csub\u3e2\u3c/sub\u3e conversion process. This work is important for understanding and optimizing the GAP for CO\u3csub\u3e2\u3c/sub\u3e conversion.\u3c/p\u3

CO₂ Conversion in a Gliding Arc Plasmatron: Multidimensional Modeling for Improved Efficiency

The gliding arc plasmatron (GAP) is a highly efficient atmospheric plasma source, which is very promising for CO₂ conversion applications. To understand its operation principles and to improve its application, we present here comprehensive modeling results, obtained by means of computational fluid dynamics simulations and plasma modeling. Because of the complexity of the CO₂ plasma, a full 3D plasma model would be computationally impractical. Therefore, we combine a 3D turbulent gas flow model with a 2D plasma and gas heating model in order to calculate the plasma parameters and CO₂ conversion characteristics. In addition, a complete 3D gas flow and plasma model with simplified argon chemistry is used to evaluate the gliding arc evolution in space and time. The calculated values are compared with experimental data from literature as much as possible in order to validate the model. The insights obtained in this study are very helpful for improving the application of CO₂ conversion, as they allow us to identify the limiting factors in the performance, based on which solutions can be provided on how to further improve the capabilities of CO₂ conversion in the GAP

Revealing the arc dynamics in a gliding arc plasmatron: a better insight to improve CO 2

A gliding arc plasmatron (GAP) is very promising for CO2 conversion into value-added chemicals, but to further improve this important application, a better understanding of the arc behavior is indispensable. Therefore, we study here for the first time the dynamic arc behavior of the GAP by means of a high-speed camera, for different reactor configurations and in a wide range of operating conditions. This allows us to provide a complete image of the behavior of the gliding arc. More specifically, the arc body shape, diameter, movement and rotation speed are analyzed and discussed. Clearly, the arc movement and shape relies on a number of factors, such as gas turbulence, outlet diameter, electrode surface, gas contraction and buoyance force. Furthermore, we also compare the experimentally measured arc movement to a state-of-the-art 3D-plasma model, which predicts the plasma movement and rotation speed with very good accuracy, to gain further insight in the underlying mechanisms. Finally, we correlate the arc dynamics with the CO2 conversion and energy efficiency, at exactly the same conditions, to explain the effect of these parameters on the CO2 conversion process. This work is important for understanding and optimizing the GAP for CO2 conversion