Elaboration d'aérogels d'hydroxydes doubles lamellaires et de bionanocomposites à base d'alginate

In this work, we investigated both the use of CO2 supercritical drying conditions and the use of biopolymer to modify the growth and aggregation of inorganic Layered Double Hydroxide (LDH) particles. Indeed, one possibility to enhance their performances is to increase the LDH porosity and to design them as nanostructured open structure. Thanks to the combinaison of fast coprecipitation and CO2 supercritical drying, highly porous LDH aerogels were obtained with enhanced textural properties. In parallel, the coprecipitation of Layered Double Hydroxides (LDH) in the confined space of alginate beads is reported. In our approach, Alginate acts as a template to support and confined the inorganic precipitation. In one hand, beads made of Alginate are synthesized by complexation of Ca2+ ions and LDH phases are coprecipitated using successive impregnations of reactants. In another hand, Alginate beads are formed directly in presence of the divalent (Mg2+, Ni2+, Co2+,…) and trivalent metal cations (Al3+), precursors of the inorganic compounds. LDH coprecipitation then occurs during a further impregnation step in a sodium hydroxide solution. All the LDH aerogels and LDH nanocomposites beads are deeply characterized using XRD, SEM/TEM, FTIR spectroscopic, adsorption/desorption of nitrogen and TGA/DTG to get better insight on particle structure, size and morphology Aerogels display enhanced adsorption behavior toward trypsine immobilization whereas a net improvement of the electrochemical response is noticed for the NiAl based bionanocomposites prepared by confined coprecipitation into Alginate.Cette thèse présente un travail sur l’obtention d’aérogels d’HDL par séchage en conditions CO2 supercritique et l’élaboration de nouveaux bionanocomposites formés par la coprécipitation d’hydroxydes doubles lamellaire (HDL) dans l'espace confiné des billes d'alginate. Grâce à la combinaison d’une synthèse par coprécipitation Flash et d’un séchage en conditions supercritiques au CO2, des aérogels d’HDL possédant des surfaces spécifiques élevées sont élaborés. Parallèlement, l’alginate est utilisé comme une matrice de confinement pour la précipitation inorganique d’HDL. D’une part, les billes d'alginate sont synthétisées par complexation des ions Ca2+ et la coprécipitation des phases HDL s’effectue en réalisant des imprégnations successives de réactifs. D’autre part, des billes d'alginate sont formées directement en présence des cations divalents (Mg2+, Ni2++, Co2+, ...) et des cations des métaux trivalents (Al3+), précurseurs des composés inorganiques. La coprécipitation des HDL se produit dans ce cas lors d'une étape d'imprégnation dans une solution d'hydroxyde de sodium. Tous les composés HDL, aérogels ou encore bionanocomposites sont caractérisés en détail par DRX, spectroscopie IR, MEB/MET, adsorption/désorption d’azote et ATG/DTG, pour obtenir un meilleur aperçu de la structure des particules, de leur taille et de leur morphologie. Des études menées sur l’adsorption de la trypsine pour les aérogels ou encore sur les performances d’électrodes modifiées HDL-alginate ont permis de montrer qu’il était possible d'améliorer les performances des HDL en augmenter leur porosité et en élaborant des bionanocomposites

Elaboration of LDH aerogel and alginate based nanocomposites

Cette thèse présente un travail sur l’obtention d’aérogels d’HDL par séchage en conditions CO2 supercritique et l’élaboration de nouveaux bionanocomposites formés par la coprécipitation d’hydroxydes doubles lamellaire (HDL) dans l'espace confiné des billes d'alginate. Grâce à la combinaison d’une synthèse par coprécipitation Flash et d’un séchage en conditions supercritiques au CO2, des aérogels d’HDL possédant des surfaces spécifiques élevées sont élaborés. Parallèlement, l’alginate est utilisé comme une matrice de confinement pour la précipitation inorganique d’HDL. D’une part, les billes d'alginate sont synthétisées par complexation des ions Ca2+ et la coprécipitation des phases HDL s’effectue en réalisant des imprégnations successives de réactifs. D’autre part, des billes d'alginate sont formées directement en présence des cations divalents (Mg2+, Ni2++, Co2+, ...) et des cations des métaux trivalents (Al3+), précurseurs des composés inorganiques. La coprécipitation des HDL se produit dans ce cas lors d'une étape d'imprégnation dans une solution d'hydroxyde de sodium. Tous les composés HDL, aérogels ou encore bionanocomposites sont caractérisés en détail par DRX, spectroscopie IR, MEB/MET, adsorption/désorption d’azote et ATG/DTG, pour obtenir un meilleur aperçu de la structure des particules, de leur taille et de leur morphologie. Des études menées sur l’adsorption de la trypsine pour les aérogels ou encore sur les performances d’électrodes modifiées HDL-alginate ont permis de montrer qu’il était possible d'améliorer les performances des HDL en augmenter leur porosité et en élaborant des bionanocomposites.In this work, we investigated both the use of CO2 supercritical drying conditions and the use of biopolymer to modify the growth and aggregation of inorganic Layered Double Hydroxide (LDH) particles. Indeed, one possibility to enhance their performances is to increase the LDH porosity and to design them as nanostructured open structure. Thanks to the combinaison of fast coprecipitation and CO2 supercritical drying, highly porous LDH aerogels were obtained with enhanced textural properties. In parallel, the coprecipitation of Layered Double Hydroxides (LDH) in the confined space of alginate beads is reported. In our approach, Alginate acts as a template to support and confined the inorganic precipitation. In one hand, beads made of Alginate are synthesized by complexation of Ca2+ ions and LDH phases are coprecipitated using successive impregnations of reactants. In another hand, Alginate beads are formed directly in presence of the divalent (Mg2+, Ni2+, Co2+,…) and trivalent metal cations (Al3+), precursors of the inorganic compounds. LDH coprecipitation then occurs during a further impregnation step in a sodium hydroxide solution. All the LDH aerogels and LDH nanocomposites beads are deeply characterized using XRD, SEM/TEM, FTIR spectroscopic, adsorption/desorption of nitrogen and TGA/DTG to get better insight on particle structure, size and morphology Aerogels display enhanced adsorption behavior toward trypsine immobilization whereas a net improvement of the electrochemical response is noticed for the NiAl based bionanocomposites prepared by confined coprecipitation into Alginate

Confined Growth of NiAl-Layered Double Hydroxide Nanoparticles Within Alginate Gel: Influence on Electrochemical Properties

International audienceNiAl Layered Double Hydroxide (LDH) alginate bionanocomposites were synthesized by confined coprecipitation within alginate beads. The NiAl based bionanocomposites were prepared either by impregnation by divalent and trivalent metal cations of pre-formed calcium cross-linked alginate beads or by using the metal cations (Ni2+, Al3+) as crosslinking cationic agents for the biopolymer network. The impregnation step was systematically followed by a soaking in NaOH solution to induce the LDH coprecipitation. Powder x-ray diffraction (PXRD), infrared spectroscopy (FTIR), energy dispersive X-ray analysis (EDX), thermogravimetry analysis (TGA), electron microscopies (SEM and TEM) confirmed the biotemplated coprecipitation of LDH nanoparticles ranging from 75 to 150 nm for both strategies. The drying of the LDH@alginate beads by supercritical CO2 drying process led to porous bionanocomposite aerogels when Ca2+ cross-linked alginate beads were used. Such confined preparation of NiAl LDH was extended to bionanocomposite films leading to similar results. The permeability and the electrochemical behavior of these NiAl@alginate bionanocomposites, as thin films coated on indium tin oxide (ITO) electrodes, were investigated by cyclic voltammetry, demonstrating an efficient diffusion of the K4Fe(CN)6 redox probe through the LDH@alginate based films and the improvement of the electrochemical accessibility of the Ni sites

Stacked Auto-Encoder for Scalable Indoor Localization in Wireless Sensor Networks

International audienceIn this paper, we propose a Deep Neural Network model based on WiFi-fingerprinting to improve the accuracy of zone location in a multi-building, multi-floor indoor environment. The proposed model is presented as a Stacked AutoEncoder (SAE) to allow efficient reduction of the feature space in order to achieve robust and precise classification. The multi-label classification is used to simplify and reduce the complexity of the learning classification task during the training phase. To achieve a hierarchical classification, we applied an argmax function on the multi-label output to convert the multi-label classification into multi-class classification ones to estimate the building, the floor and the zone identifier. Experimental results show that the proposed model achieves an accuracy of 100% for building, 99.66% for floor and 83.47% for zone location with a test time that does not exceed 10.21s

Nanostructured layered double hydroxide aerogels with enhanced adsorption properties.

International audienceAerogels of layered double hydroxides were prepared by a simple and eco-friendly method involving a quick coprecipitation followed by supercritical CO2 drying. Such aerogels display high surface areas and enhanced adsorption behavior

Risdiplam in Patients Previously Treated with Other Therapies for Spinal Muscular Atrophy: An Interim Analysis from the JEWELFISH Study

Introduction: Risdiplam is a survival of motor neuron 2 (SMN2) splicing modifier for the treatment of patients with spinal muscular atrophy (SMA). The JEWELFISH study (NCT03032172) was designed to assess the safety, tolerability, pharmacokinetics (PK), and pharmacodynamics (PD) of risdiplam in previously treated pediatric and adult patients with types 1–3 SMA. Here, an analysis was performed after all patients had received at least 1 year of treatment with risdiplam. Methods: Patients with a confirmed diagnosis of 5q-autosomal recessive SMA between the ages of 6 months and 60 years were eligible for enrollment. Patients were previously enrolled in the MOONFISH study (NCT02240355) with splicing modifier RG7800 or treated with olesoxime, nusinersen, or onasemnogene abeparvovec. The primary objectives of the JEWELFISH study were to evaluate the safety and tolerability of risdiplam and investigate the PK after 2 years of treatment. Results: A total of 174 patients enrolled: MOONFISH study (n = 13), olesoxime (n = 71 patients), nusinersen (n = 76), onasemnogene abeparvovec (n = 14). Most patients (78%) had three SMN2 copies. The median age and weight of patients at enrollment was 14.0 years (1–60 years) and 39.1 kg (9.2–108.9 kg), respectively. About 63% of patients aged 2–60 years had a baseline total score of less than 10 on the Hammersmith Functional Motor Scale–Expanded and 83% had scoliosis. The most common adverse event (AE) was upper respiratory tract infection and pyrexia (30 patients each; 17%). Pneumonia (four patients; 2%) was the most frequently reported serious AE (SAE). The rates of AEs and SAEs per 100 patient-years were lower in the second 6-month period compared with the first. An increase in SMN protein was observed in blood after risdiplam treatment and was comparable across all ages and body weight quartiles. Conclusions: The safety and PD of risdiplam in patients who were previously treated were consistent with those of treatment-naïve patients