3,923 research outputs found
3_D modeling using TLS and GPR techniques to characterize above and below-ground wood distribution in pyroclastic deposits along the Blanco River (Chilean Patagonia)
To date, the study of in-stream wood in rivers has been focused mainly on quantifying wood pieces deposited above
the ground. However, in some particular river systems, the presence of buried dead wood can also represent an
important component of wood recruitment and budgeting dynamics. This is the case of the Blanco River (Southern
Chile) severely affected by the eruption of Chait\ue9n Volcano occurred between 2008 and 2009. The high pyroclastic
sediment deposition and transport affected the channel and the adjacent forest, burying wood logs and standing
trees. The aim of this contribution is to assess the presence and distribution of wood in two study areas (483 m2 and
1989 m2, respectively) located along the lower streambank of the Blanco River, and covered by thick pyroclastic
deposition up to 5 m. The study areas were surveyed using two different devices, a Terrestrial Laser Scanner (TLS)
and a Ground Penetrating Radar (GPR). The first was used to scan the above surface achieving a high point cloud
density ( 48 2000 points m-2) which allowed us to identify and measure the wood volume. The second, was used
to characterize the internal morphology of the volcanic deposits and to detect the presence and spatial distribution
of buried wood up to a depth of 4 m. Preliminary results have demonstrated differences in the numerousness and
volume of above wood between the two study areas. In the first one, there were 43 wood elements, 33 standing
trees and 10 logs, with a total volume of 2.96 m3 (109.47 m3 km-1), whereas the second one was characterized
by the presence of just 7 standing trees and 11 wood pieces, for a total amount of 0.77 m3 (7.73 m3 km-1). The
dimensions of the wood elements vary greatly according to the typology, standing trees show the higher median
values in diameter and length (0.15 m and 2.91 m, respectively), whereas the wood logs were smaller (0.06 m and
1.12 m, respectively). The low dimensions of deposited wood can be probably connected to their origin, suggesting
that these elements were generated by toppling and breaking of surrounding dead trees. Results obtained with the
GPR confirm the ability of this instrument to localize the presence and distribution of buried wood. From the 3-
D analysis it was possible to assess the spatial distribution and to estimate, as first approach, the volume of the
buried wood which represents approximately 0.04% of the entire volcanic deposit. Further analysis will focus on
additional GPR calibration with different wood sizes for a more accurate estimation of the volume. The knowledge
of the overall wood amount stored in a fluvial system that can be remobilized over time, represent an essential
factor to ensure better forest and river management actions
Effect of oil in emulsion and homogenization pressure on the microencapsulation of basil oil.
Microencapsulation of flaxseed oil by spray drying: Influence of process conditions and emulsion properties.
Effect of process parameters on the droplet size of flaxseed oil emulsions produced by cross flow membrane emulsification.
Avaliação de diferentes combinações de materiais de parede na microencapsulação de óleo de linhaça por spray drying.
Efeito da utilização de combinações de materiais de parede nas propriedades das emulsões e partículas e na eficiência de encapsulação do óleo de linhaça.
Effect of different combination of wall materials on the encapsulation efficiency of flaxseed oil microencapsulated by spray drying.
Colloidal gas aphron extraction of bioactive compounds from brazilian pinot noir grape pomace.
Residues from the food industry are a problem worldwide. Alternatives have been developed in an attempted to extract compounds from fruit pomace in other to apply those as a natural component in different products. This work has the objective to produce two extracts: (1) ethanolic extract and (2) hot water extract; and characterize the chemical composition of these extracts for future application. In sequence an extraction using surfactants (Colloidal Gas Aphron) was applied in order to obtain a more concentrate and pure extract, in a foam form with better physical properties. The ethanolic extraction was more efficient, obtaining 4 times more bioactive compound (in 100g of pomace: 2670.63 mg Gallic Acid; 65.70 mg anthocyanins and 45,564.78 mmol of Trolox). However the CGA was able to concentrate more the compounds from hot water extract, 61.62% of phenolics compounds were concentrated in the Aphron phase
- …