Crystallographic texture- and grain boundary density-independent improvement of corrosion resistance in austenitic 316L stainless steel fabricated via laser powder bed fusion

Improvement of corrosion resistance of austenitic 316L stainless steel via laser powder bed fusion (LPBF) is currently a prominent research topic; however, the effects of crystallographic texture and the related grain boundary density on the corrosion resistance of LPBF-fabricated parts have not been elucidated. For biomedical applications, crystallographic texture control from a single crystalline-like to randomly oriented polycrystalline microstructure is highly attractive for optimizing the mechanical properties (particularly the Young's modulus) of implants. An investigation of the impacts of crystallographic planes and grain boundaries exposed to the biological environment on corrosion behavior is necessary. 316L stainless steels with different crystallographic textures and grain boundary densities were successfully fabricated via LPBF. The corrosion resistances of the LPBF-fabricated specimens were comprehensively assessed by anodic polarization, dissolution, and crevice corrosion repassivation tests. The LPBF-fabricated specimens showed extremely high pitting potentials in the physiological saline compared with the commercially available counterparts, and importantly, excellent pitting corrosion resistance was observed irrespective of the crystallographic planes and grain boundary density exposed. Moreover, the LPBF-fabricated specimens did not show metastable pitting corrosion even in an accelerated test using an acid solution. The repassivation behavior of the specimens was not affected by LPBF. Such a drastic improvement in the corrosion resistances of the LPBF-fabricated specimens might be attributed to suppression of inclusion coarsening owing to the rapid cooling rate during solidification in LPBF. By using LPBF, the desired crystallographic texture can be introduced based on the desired mechanical properties without concern for corrosiveness.Tsutsumi Y., Ishimoto T., Oishi T., et al. Crystallographic texture- and grain boundary density-independent improvement of corrosion resistance in austenitic 316L stainless steel fabricated via laser powder bed fusion. Additive Manufacturing, 45, 102066. https://doi.org/10.1016/j.addma.2021.102066

Investigation of the Long-Term Antibacterial Properties of Titanium by Two-Step Micro-Arc Oxidation Treatment

Recently, biofilm formation caused by bacterial adhesion and colonization has been recognized as the major cause of failure in orthopedic and dental implant surgeries. In this study, a customized micro-arc oxidation (MAO) treatment technique was developed to obtain desirable antibacterial properties on Ti surfaces. The two-step MAO treatment was applied in the fabrication of specimens with Ag and with/without Zn in their surface oxide layer. In order to simulate practical usage, surface analyses and immersion tests were performed to evaluate the incorporation of Ag and Zn into the resulting oxide layer and ion release behavior, respectively. Additionally, the antibacterial properties of the specimens after long-term immersion in physiological saline were evaluated using Gram-negative facultative anaerobic bacteria. The MAO-treated specimens containing Ag and Zn exhibited excellent antibacterial properties against Escherichia coli, which were sustained even after 6 months of immersion in physiological saline to simulate practical usage. Moreover, the Ag ions released from the surface oxide indicate the antibacterial properties of the specimen in the early stage, while the release of the corrosion products of Zn demonstrates its antibacterial properties in the later stage