Plant micro- and nanomechanics: experimental techniques for plant cell-wall analysis

In the last few decades, micro- and nanomechanical methods have become increasingly important analytical techniques to gain deeper insight into the nanostructure and mechanical design of plant cell walls. The objective of this article is to review the most common micro- and nanomechanical approaches that are utilized to study primary and secondary cell walls from a biomechanics perspective. In light of their quite disparate functions, the common and opposing structural features of primary and secondary cell walls are reviewed briefly. A significant part of the article is devoted to an overview of the methodological aspects of the mechanical characterization techniques with a particular focus on new developments and advancements in the field of nanomechanics. This is followed and complemented by a review of numerous studies on the mechanical role of cellulose fibrils and the various matrix components as well as the polymer interactions in the context of primary and secondary cell-wall functio

Plant material features responsible for bamboo's excellent mechanical performance: a comparison of tensile properties of bamboo and spruce at the tissue, fibre and cell wall levels

Background and Aims Bamboo is well known for its fast growth and excellent mechanical performance, but the underlying relationships between its structure and properties are only partially known. Since it lacks secondary thickening, bamboo cannot use adaptive growth in the same way as a tree would in order to modify the geometry of the stem and increase its moment of inertia to cope with bending stresses caused by wind loads. Consequently, mechanical adaptation can only be achieved at the tissue level, and this study aims to examine how this is achieved by comparison with a softwood tree species at the tissue, fibre and cell wall levels. Methods The mechanical properties of single fibres and tissue slices of stems of mature moso bamboo (Phyllostachys pubescens) and spruce (Picea abies) latewood were investigated in microtensile tests. Cell parameters, cellulose microfibril angles and chemical composition were determined using light and electron microscopy, wide-angle X-ray scattering and confocal Raman microscopy. Key Results Pronounced differences in tensile stiffness and strength were found at the tissue and fibre levels, but not at the cell wall level. Thus, under tensile loads, the differing wall structures of bamboo (multilayered) and spruce (sandwich-like) appear to be of minor relevance. Conclusions The superior tensile properties of bamboo fibres and fibre bundles are mainly a result of amplified cell wall formation, leading to a densely packed tissue, rather than being based on specific cell wall properties. The material optimization towards extremely compact fibres with a multi-lamellar cell wall in bamboo might be a result of a plant growth strategy that compensates for the lack of secondary thickening growth at the tissue level, which is not only favourable for the biomechanics of the plant but is also increasingly utilized in terms of engineering products made from bamboo culm

SI-ARGET-ATRP grafting of block copolymers with amphiphilic properties on lignocellulosic materials

Oil is the most significant pollutant in water, since it is released inadvertently from various sources in great quantities. As traditional oil separation methods are plagued with various shortcomings, research for novel membrane materials is ongoing. Wood, as a highly abundant material with a unique anisotropic porous microstructure designed for fluid transport, offers an ideal scaffold for oil-water separation applications. We have recently reported on native wood membranes, which were capable of separating free oil-water mixtures with high efficiency, low oil fouling, and high flux [1]. However, in order to separate oil-in-water emulsions, changes in wood surface wettability through chemical modification are needed. Please download the file below for full content

Solvent-controlled modification on lignocellulosic materials via SI-ATRP

Wood is a biobased material, which can be used for a wide range of applications. It possesses excellent mechanical properties and a hierarchical porous structure designed for fluid transport. The natural origin of wood comes with advantages (readily available scaffold for different applications, highly abundant, and sustainable) and drawbacks (high variability in its structure and chemical composition). The latter represents a challenge when a good control over the desired modification is needed. Please click Additional Files below to see the full abstract

Even Visually Intact Cell Walls in Waterlogged Archaeological Wood Are Chemically Deteriorated and Mechanically Fragile : A Case of a 170 Year-Old Shipwreck

Structural and chemical deterioration and its impact on cell wall mechanics were investigated for visually intact cell walls (VICWs) in waterlogged archaeological wood (WAW). Cell wall mechanical properties were examined by nanoindentation without prior embedding. WAW showed more than 25% decrease of both hardness and elastic modulus. Changes of cell wall composition, cellulose crystallite structure and porosity were investigated by ATR-FTIR imaging, Raman imaging, wet chemistry, C-13-solid state NMR, pyrolysis-GC/MS, wide angle X-ray scattering, and N-2 nitrogen adsorption. VICWs in WAW possessed a cleavage of carboxyl in side chains of xylan, a serious loss of polysaccharides, and a partial breakage of beta -O-4 interlinks in lignin. This was accompanied by a higher amount of mesopores in cell walls. Even VICWs in WAW were severely deteriorated at the nanoscale with impact on mechanics, which has strong implications for the conservation of archaeological shipwrecks.Peer reviewe

Even Visually Intact Cell Walls in Waterlogged Archaeological Wood Are Chemically Deteriorated and Mechanically Fragile: A Case of a 170 Year-Old Shipwreck

Structural and chemical deterioration and its impact on cell wall mechanics were investigated for visually intact cell walls (VICWs) in waterlogged archaeological wood (WAW). Cell wall mechanical properties were examined by nanoindentation without prior embedding. WAW showed more than 25% decrease of both hardness and elastic modulus. Changes of cell wall composition, cellulose crystallite structure and porosity were investigated by ATR-FTIR imaging, Raman imaging, wet chemistry, 13C-solid state NMR, pyrolysis-GC/MS, wide angle X-ray scattering, and N2 nitrogen adsorption. VICWs in WAW possessed a cleavage of carboxyl in side chains of xylan, a serious loss of polysaccharides, and a partial breakage of β-O-4 interlinks in lignin. This was accompanied by a higher amount of mesopores in cell walls. Even VICWs in WAW were severely deteriorated at the nanoscale with impact on mechanics, which has strong implications for the conservation of archaeological shipwrecks

Understanding the formation of heartwood in Larch using synchrotron infrared imaging combined with multivariate analysis and atomic force microscope infrared spectroscopy

Formation of extractive-rich heartwood is a process in live trees that make them and the wood obtained from them more resistant to fungal degradation. Despite the importance of this natural mechanism, little is known about the deposition pathways and cellular level distribution of extractives. Here we follow heartwood formation in Larix gmelinii var. Japonica by use of synchrotron infrared images analyzed by the unmixing method Multivariate Curve Resolution - Alternating Least Squares (MCR-ALS). A subset of the specimens was also analyzed using atomic force microscopy infrared spectroscopy. The main spectral changes observed in the transition zone when going from sapwood to heartwood was a decrease in the intensity of a peak at approximately 1660 cm-1 and an increase in a peak at approximately 1640 cm-1. There are several possible interpretations of this observation. One possibility that is supported by the MCR-ALS unmixing is that heartwood formation in larch is a type II or Juglans-type of heartwood formation, where phenolic precursors to extractives accumulate in the sapwood rays. They are then oxidized and/or condensed in the transition zone and spread to the neighboring cells in the heartwood

<雑録>餘剩價値ノ原理

Within the quest for direct band-gap group IV materials, strain engineering in germanium is one promising route. We present a study of the strain distribution in single, suspended germanium nanowires using nanofocused synchrotron radiation. Evaluating the probed Bragg reflection for different illumination positions along the nanowire length results in corresponding strain components as well as the nanowire's tilting and bending. By using these findings we determined the complete strain state with the help of finite element modelling. The resulting information provides us with the possibility of evaluating the validity of the strain investigations following from Raman scattering experiments which are based on the assumption of purely uniaxial strain