Induced-charge electroosmosis around conducting and Janus cylinder in microchip

The induced-charge elecetroosmosis around conducting/Janus cylinder with arbitrary Debye thickness is studied numerically, when an direct current weak electric filed is suddenly applied in a confined microchannel. It’s found that there are four large circulations around the conducting cylinder, and the total flux in the microchannel is zero; there are two smaller circulations around the Janus cylinder, and they are compressed to wall. A bulk flux, which has a parabolic relation with the applied electric field, is also predicted

Bituminous Coal Combustion with New Insights

As one of the most important primary energy, bituminous coal has been widely applied in many fields. The combustion studies of bituminous coal have attracted a lot of attention due to the releases of hazardous emissions. This work focuses on the investigation of combustion characteristics of Shenmu bituminous pulverized coal as a representative bituminous coal in China with a combined TG-MS-FTIR system by considering the effect of particle size, heating rate, and the total flow rate. The combustion products were accurately quantified by normalization and numerical analysis of MS results. The results indicate that the decrease of the particle size, heating rate, and the total flow rate result in lower ignition and burnout temperatures. The activation energy tends to be lower with smaller particle size, faster heating rate, and lower total flow rate. The MS and FTIR results demonstrate that lower concentrations of different products, such as NO, NO2, HCN, CH4, and SO2, were produced with smaller particle size, slower heating rate, and lower total flow rate. This work will guide to understand the combustion kinetics of pulverized coals and be beneficial to control the formation of pollutants

CVD‐Made Spinels: Synthesis, Characterization and Applications for Clean Energy

To reduce emissions and protect environment from pollution caused by volatile organic compounds (VOCs) and CO, catalytic oxidation can be applied as an efficient and promising technique. This review provides a novel and facile strategy to synthesize spinel-type and non-spinel-type transition metal oxides (TMOs). Specifically, single (Co3O4, α-Fe2O3, Mn3O4, CuO, Cu2O and Cr2O3) and binary (Co3-xCuxO4, Co3-xMnxO4 and Co3-xFexO4) TMOs have been prepared using pulsed spray evaporation chemical vapor deposition approach (PSE-CVD). PSE-CVD offers several advantages over conventional methods, such as relatively low cost, simplicity and high throughput, which makes it a promising strategy. Moreover, the PSE delivery system allows using less stable precursors and permits improving the reproducibility of the film properties with tailored compositions. The above listed TMOs prepared by PSE-CVD were successfully tested as catalysts toward the complete oxidation of some real fuels such as CO, C2H2, C3H6, n-C4H8 and C2H6O as representatives of VOCs and industrial exhaust streams. The active TMOs explored in this review could be potential catalysts candidates in one of the research areas that are currently under scrutiny, as the battle for the future of energy and environment involves the generation and application of clean energy