4 research outputs found
Design methodology and comparison of rectifiers for UHF-band RFIDs
Rectifiers are important energy converters and henceforth crucial building blocks for RFID applications. In the first half of the work, we have presented a design methodology for matching the rectifier input impedance with the antenna to maximize the rectifier power conversion efficiency. The proposed design approach uses the fundamental transconductance (Gm(1)) analysis to estimate the rectifier input impedance. In the second half, a comparison between various possible single-stage rectifier topologies implemented in a CMOS 0.18 mu m technology operating at UHF-band is presented. Using voltage conversion efficiency as the FOM, the optimum rectifier topology for RFID application is determined
A Low Power Super-Regenerative Impulse Radio Ultra-Wideband Receiver in CMOS Technology
Communication systems have played a key role in changing our lives as such systems help to access remote data and to transfer it to the end user when requested. Intelligent nodes, which can process and transmit information placed in a given environment can provide localized data that might not be available through a public network such as the internet. As an example, nodes can provide dynamic data such as room temperature, chemical composition of air, or light intensity level. With the progress made in the semiconductor industry, such nodes have become compact, thereby making it easier to setup a cluster in a confined place. Often these nodes are to be placed in a remote location and hence the use of a cable to power up these devices might not be possible. Also, the use of cables makes the system bulky and heavy. For this reason battery-powered wireless sensor nodes are desirable. Such battery operated devices need to be energy efficient to avoid replacing the batteries often. Energy efficiency can be achieved by optimizing several parameters from the top (system level architecture) to the bottom (transistor level design). The thesis describes a receiver system design for Impulse-radio Ultra-Wideband (IR-UWB) signalling standard proposed in IEEE 802.11.4a for short range, low data rate communication system. The advantages of the IR-UWB signalling scheme over other existing standards and a comparison between various receiver architectures for IR-UWB standard using energy consumption as a metric is described. The main power consuming block in an IR-UWB receiver is identified to be the front-end amplifier structure as it needs to provide sufficient gain for proper operation of the subsequent stages. To reduce the power consumption of this amplifier, the super-regenerative architecture for IR-UWB system is proposed. It is shown in this work that since the super-regenerative receiver uses an amplifier with positive feedback, it can achieve high gain with a relatively low current, hence it can significantly reduce the power consumption. The super-regenerative receiver for the IR-UWB system is implemented in a 0.18 µm CMOS technology operating at 1.5 V, and the receiver energy consumption is 0.24 nJ/bit at a data rate of 10 Mbps. The receiver achieves a measured sensitivity of -66 and -61 dBm at 3.494 and 3.993 GHz, respectively, with a BER of 10-3. Finally, an automatic tuning circuitry based on a digital phase-locked loop architecture (DPLL) for super-regenerative receiver is proposed. The objective is to tune the receiver to either one of the sub-bands (3.494 or 3.993 GHz) as proposed in the IEEE 802.15.4a standard. Including the tuning circuitry helps to improve the receiver sensitivity, and also demonstrates the possibility for multi-band reception using such an architecture. The proposed DPLL is implemented in a 0.18 µm CMOS technology consuming 9.3 mW
In-Vitro Platform to study Ultrasound as Source for Wireless Energy Transfer and Communication for Implanted Medical Devices
Abstract—A platform to study ultrasound as a source for wireless energy transfer and communication for implanted medical devices is described. A tank is used as a container for a pair of electroacoustic transducers, where a control unit is fixed to one wall of the tank and a transponder can be manually moved in three axes and rotate using a mechanical system. The tank is filled with water to allow acoustic energy and data transfer, and the system is optimized to avoid parasitic effects due to cables, reflection paths and cross talk problems. A printed circuit board is developed to test energy scavenging such that enough acoustic intensity is generated by the control unit to recharge a battery loaded to the transponder. In the same manner, a second printed circuit board is fabricated to study transmission of information through acoustic waves. Index Terms—biomedical telemetry, energy scavenging, implanted medical devices, ultrasound, sensor networks, wireless communication. I