Free vibration analysis and design optimization of SMA/Graphite/Epoxy composite shells in thermal environments

Composite shells, which are being widely used in engineering applications, are often under thermal loads. Thermal loads usually bring thermal stresses in the structure which can significantly affect its static and dynamic behaviors. One of the possible solutions for this matter is embedding Shape Memory Alloy (SMA) wires into the structure. In the present study, thermal buckling and free vibration of laminated composite cylindrical shells reinforced by SMA wires are analyzed. Brinson model is implemented to predict the thermo-mechanical behavior of SMA wires. The natural frequencies and buckling temperatures of the structure are obtained by employing Generalized Differential Quadrature (GDQ) method. GDQ is a powerful numerical approach which can solve partial differential equations. A comparative study is carried out to show the accuracy and efficiency of the applied numerical method for both free vibration and buckling analysis of composite shells in thermal environment. A parametric study is also provided to indicate the effects of like SMA volume fraction, dependency of material properties on temperature, lay-up orientation, and pre-strain of SMA wires on the natural frequency and buckling of Shape Memory Alloy Hybrid Composite (SMAHC) cylindrical shells. Results represent the fact that SMAs can play a significant role in thermal vibration of composite shells. The second goal of present work is optimization of SMAHC cylindrical shells in order to maximize the fundamental frequency parameter at a certain temperature. To this end, an eight-layer composite shell with four SMA-reinforced layers is considered for optimization. The primary optimization variables are the values of SMA angles in the four layers. Since the optimization process is complicated and time consuming, Genetic Algorithm (GA) is performed to obtain the orientations of SMA layers to maximize the first natural frequency of structure. The optimization results show that using an optimum stacking sequence for SMAHC shells can increase the fundamental frequency of the structure by a considerable amount

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Multihydroxyl End Functional Polyethylenes: Synthesis, Bulk and Interfacial Properties of Polymer Surfactants

Multihydroxyl end functional polyethylenes have been prepared with controlled molecular weight, microstructure, and functionalization. These materials, designed as interfacially active blend additives for polar interfaces, are thermally stable up to 250 °C and to have similar crystallinity and dynamics to their unfunctionalized homopolymer analogues. The polymers segregated strongly to silicon oxide interfaces, with adsorbed layers forming spontaneously at annealed polymer interfaces, having surface excess concentrations approaching 2Rg and a maximum areal density of approximately 0.6 adsorbed chains per nm2. This interfacial activity is achieved almost without detriment to the bulk physical properties of the polymer as evidenced by thermal analysis, quasi-elastic neutron scattering, and small-angle neutron scattering (SANS). SANS experiments show little evidence for aggregation of the dihydroxyl functionalized polymers in blends with PE homopolymers, which is thought to explain why these additives have particularly strong interfacial adsorption, even at relatively high concentrations. A modest level of segregation of the additives to exposed blend surfaces was also seen, particularly when the additive molecular weight was significantly lower than that of the matrix. We attribute this to a combination of the relatively low molecular weight of the additives and the marginally lower surface energy associated with deuterated polymers

Constraining Alteration Processes Along the Siccar Point Group Unconformity, Gale Crater, Mars: Results from the Sample Analysis at Mars Instrument

International audienceResults from the Sample Analysis at Mars (SAM)-evolved gas analyzer (EGA) on board the Mars Science Laboratory Curiosity rover constrained the alteration history and habitability potential of rocks sampled across the Siccar Point unconformity in Gale crater.The Glasgow member (Gm) mudstone just below the unconformity had evidence of acid sulfate or Si-poor brine alteration of Fe-smectite to Fe amorphous phases, leaching loss of Fe-Mg-sulfate and exchange of unfractionated sulfur 34S (δ34S=2±7‰) with enriched 34S (20±5‰, V-CDT). Carbon abundances did not significantly change (322-661 μgC/g) consistent with carbon stabilization by amorphous Al- and Fe-hydroxide phases. The Gm mudstone had no detectable oxychlorine and extremely low nitrate. Nitrate (0.06 wt.% NO3), oxychlorine (0.13 wt% ClO4), high C (1472 μg C/g), and low Fe/Mg-sulfate concentration (0.24 wt.% SO3) depleted in 34S (δ34S = -27‰ ± 7), were detected in the Stimson formation (Sf) eolian sandstone above the unconformity. Redox disequilibrium through the detections of iron sulfide and sulfate supported limited aqueous processes in the Sf sandstone. Si-poor brines or acidic fluids altered the Gm mudstone just below the unconformity but did not alter underlying Gm mudstones further from the contact. Chemical differences between the Sf and Gm rocks suggested that fluid interaction was minimal between the Sf and Gm rocks. These results suggested that the Gm rocks were altered by subsurface fluids after the Sf placement. Aqueous processes along the unconformity could have provided habitable conditions and in some cases, C and N levels could have supported heterotrophic microbial populations