Open cell fire-resistant foam

Candidate polyphosphazene polymers were investigated to develop a fire-resistant, thermally stable and flexible open cell foam. The copolymers were prepared in several mole ratios of the substituent side chains and a (nominal) 40:60 derivative was selected for formulation studies. Synthesis of the polymers involved solution by polymerization of hexachlorophosphazene to soluble high molecular weight poly(dichlorophosphazene), followed by derivatization of the resultant polymer in a normal fashion to give polymers in high yield and high molecular weight. Small amounts of a cure site were incorporated into the polymer for vulcanization purposes. The poly(aryloxyphosphazenes) exhibited good thermal stability and the first polymer mentioned above exhibited the best thermal behavior of all the candidate polymers studied

Transform-limited X-ray pulse generation from a high-brightness self-amplified spontaneous-emission free-electron laser

A method to achieve high-brightness self-amplified spontaneous emission (HB-SASE) in the free-electron laser (FEL) is described. The method uses repeated nonequal electron beam delays to delocalize the collective FEL interaction and break the radiation coherence length dependence on the FEL cooperation length. The method requires no external seeding or photon optics and so is applicable at any wavelength or repetition rate. It is demonstrated, using linear theory and numerical simulations, that the radiation coherence length can be increased by approximately 2 orders of magnitude over SASE with a corresponding increase in spectral brightness. Examples are shown of HB-SASE generating transform-limited FEL pulses in the soft x-ray and near transform-limited pulses in the hard x-ray. Such pulses may greatly benefit existing applications and may also open up new areas of scientific research

Noncontact GMR measurements of synthetic spin valves using IR reflection spectroscopy

The magnetorefractive effect has been used in infrared reflection spectroscopy to study the magnetotransport properties of synthetic spin valves. This optical noncontact technique shows excellent correlation with the electrical giant magnetoresistance data

Aggregates of two-dimensional vesicles: Rouleaux and sheets

Using both numerical and variational minimization of the bending and adhesion energy of two-dimensional lipid vesicles, we study their aggregation, and we find that the stable aggregates include an infinite number of vesicles and that they arrange either in a columnar or in a sheet-like structure. We calculate the stability diagram and we discuss the modes of transformation between the two types of aggregates, showing that they include disintegration as well as intercalation.Comment: 4 figure

Numerical solution of the Navier-Stokes equations for blunt nosed bodies in supersonic flows

A time dependent, two dimensional Navier-Stokes code employing the method of body fitted coordinate technique was developed for supersonic flows past blunt bodies of arbitrary shapes. The bow shock ahead of the body is obtained as part of the solution, viz., by shock capturing. A first attempt at mesh refinement in the shock region was made by using the forcing function in the coordinate generating equations as a linear function of the density gradients. The technique displaces a few lines from the neighboring region into the shock region. Numerical calculations for Mach numbers 2 and 4.6 and Reynolds numbers from 320 to 10,000 were performed for a circular cylinder with and without a fairing. Results of Mach number 4.6 and Reynolds number 10,000 for an isothermal wall temperature of 556 K are presented in detail

Andreev Reflection in Heavy-Fermion Superconductors and Order Parameter Symmetry in CeCoIn_5

Differential conductance spectra are obtained from nanoscale junctions on the heavy-fermion superconductor CeCoIn$_5$ along three major crystallographic orientations. Consistency and reproducibility of characteristic features among the junctions ensure their spectroscopic nature. All junctions show a similar conductance asymmetry and Andreev reflection-like conductance with reduced signal (~ 10%-13%), both commonly observed in heavy-fermion superconductor junctions. Analysis using the extended Blonder-Tinkham-Klapwijk model indicates that our data provide the first spectroscopic evidence for $d_{x^2-y^2}$ symmetry. To quantify our conductance spectra, we propose a model by considering the general phenomenology in heavy fermions, the two-fluid behavior, and an energy-dependent density of states. Our model fits to the experimental data remarkably well and should invigorate further investigations.Comment: 4 pages, 4 figures; Phys. Rev. Lett., published versio

HiRes deconvolution of Spitzer infrared images

Spitzer provides unprecedented sensitivity in the infrared (IR), but the spatial resolution is limited by a relatively small aperture (0.85 m) of the primary mirror. In order to maximize the scientific return it is desirable to use processing techniques which make the optimal use of the spatial information in the observations. We have developed a deconvolution technique for Spitzer images. The algorithm, "HiRes" and its implementation has been discussed by Backus et al. in 2005. Here we present examples of Spitzer IR images from the Infrared Array Camera (IRAC) and MIPS, reprocessed using this technique. Examples of HiRes processing include a variety of objects from point sources to complex extended regions. The examples include comparison of Spitzer deconvolved images with high-resolution Keck and Hubble Space Telescope images. HiRes deconvolution improves the visualization of spatial morphology by enhancing resolution (to sub-arcsecond levels in the IRAC bands) and removing the contaminating sidelobes from bright sources. The results thereby represent a significant improvement over previously-published Spitzer images. The benefits of HiRes include (a) sub-arcsec resolution (~0".6-0".8 for IRAC channels); (b) the ability to detect sources below the diffraction-limited confusion level; (c) the ability to separate blended sources, and thereby provide guidance to point-source extraction procedures; (d) an improved ability to show the spatial morphology of resolved sources. We suggest that it is a useful technique to identify features which are interesting enough for follow-up deeper analysis