Selective patterning of gold surfaces by core/shell, semisoft hybrid nanoparticles

The generation of patterned surfaces with well-defined nano- and microdomains is demonstrated by attaching core/shell, semisoft nanoparticles with narrow size distribution to microdomains of a gold-coated silicon wafer. Near monodisperse nanoparticles are prepared using reversible addition-fragmentation chain transfer (RAFT) polymerization, initiated from a silica surface, to prepare a polystyrene shell around a silica core. The particles are then used as-prepared, or after aminolysis of the terminal thiocarbonyl group of the polystyrene shell, to give thiol-terminated nanoparticles. When gold-coated silicon wafers are immersed into very dilute suspensions of these particles (as low as 0.004 wt%), both types of particles are shown to adhere to the gold domains. The thiolated particles adhere selectively to the gold microdomains, allowing for microdomain patterning, while particles that contain the trithiocarbonate functionality lead to a much more even coverage of the gold surface with fewer particle aggregations

A New Methodology for Assessing Macromolecular Click Reactions and Its Application to Amine--Tertiary Isocyanate Coupling for Polymer Ligation.

Click reactions have provided access to an array of remarkably complex polymer architectures. However, the term "click" is often applied inaccurately to polymer ligation reactions that fail to respect the criteria that typify a true "click" reaction. With the purpose of providing a universal way to benchmark polymer-polymer coupling efficiency at equimolarity and thus evaluate the fulfilment of click criteria, we report a simple one-pot methodology involving the homodicoupling of α-end-functionalized polymers using a small-molecule bifunctional linker. A combination of SEC analysis and chromatogram deconvolution enables straightforward quantification of the coupling efficiency. We subsequently employ this methodology to evaluate an overlooked candidate for the click reaction family: the addition of primary amines to α-tertiary isocyanates (α-(t)NCO). Using our bifunctional linker coupling strategy, we show that the amine-(t)NCO reaction fulfills the criteria for a polymer-polymer click reaction, achieving rapid, chemoselective, and quantitative coupling at room temperature without generating any byproducts. We demonstrate that amine-(t)NCO coupling is faster and more efficient than the more common amine-tertiary active ester coupling under equivalent conditions. Additionally, we show that the α-(t)NCO end group is unprecedentedly stable in aqueous media. Thus, we propose that the amine-(t)NCO ligation is a powerful new click reaction for efficient macromolecular coupling.Dr Maarten Danial for providing the cyclic peptide.This is the final version of the article. It first appeared from the American Chemical Society via http://dx.doi.org/10.1021/jacs.5b1183

Ionic liquid-templated preparation of mesoporous silica embedded with nanocrystalline sulfated zirconia

A series of mesoporous silicas impregnated with nanocrystalline sulphated zirconia was prepared by a sol-gel process using an ionic liquid-templated route. The physicochemical properties of the mesoporous sulphated zirconia materials were studied using characterisation techniques such as inductively coupled optical emission spectroscopy, X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray microanalysis, elemental analysis and X-ray photoelectron spectroscopy. Analysis of the new silicas indicates isomorphous substitution of silicon with zirconium and reveals the presence of extremely small (< 10 nm) polydispersed zirconia nanoparticles in the materials with zirconium loadings from 27.77 to 41.4 wt.%

reactions of p coumaryl alcohol model compounds with dimethyl carbonate towards the upgrading of lignin building blocks

Cinnamyl alcohol 1 and 4-(3-hydroxypropyl)phenol 2, two compounds resembling the lignin building block p-coumaryl alcohol, can be selectively transformed into different products by catalytic methodologies based on dimethyl carbonate (DMC) as a green solvent/reagent. Selectivity can be tuned as a function of the reaction temperature and of the nature of the catalyst. Basic catalysts such as K2CO3, trioctylmethylphosphonium methylcarbonate ([P8881][CH3OCOO]), and CsF/αAl2O3 promote selective transesterification of the aliphatic hydroxyl group at 90 °C. However, amphoteric solids such as alkali metal-exchanged faujasites, NaX and NaY, selectively yield the corresponding alkyl ethers at higher temperatures (165–180 °C). The phenolic hydroxyl group of 2 can be methylated similarly with the faujasites at high temperatures. This preliminary screening for selectivity illustrates reactivity trends and delineates some of what might be among the most promising synthetic pathways to upgrade lignin-derived chemical building blocks

Single-Step Methylation of Chitosan Using Dimethyl Carbonate as a Green Methylating Agent

N,N,N-Trimethyl chitosan (TMC) is one chitosan derivative that, because of its improved solubility, has been studied for industrial and pharmaceutic applications. Conventional methods for the synthesis of TMC involve the use of highly toxic and harmful reagents, such as methyl iodide and dimethyl sulfate (DMS). Although the methylation of dimethylated chitosan to TMC by dimethyl carbonate (DMC, a green and benign methylating agent) was reported recently, it involved a formaldehyde-based procedure. In this paper we report the single-step synthesis of TMC from chitosan using DMC in an ionic liquid. The TMC synthesised was characterised by 1H NMR spectroscopy and a functionally meaningful degree of quaternisation of 9% was demonstrated after a 12-h reaction time

Variable Outcomes of Hepatitis E Infections in Patients with Hemato-Oncologic Diseases

IntroductionThe hepatitis E virus (HEV) represents an important cause of viral hepatitis and could cause chronic infections in immunocompromised patients. However, data about immunocompromised patients other than solid organ transplant recipients are limited.MethodsWe identified patients from a laboratory database and retrospectively compiled and analyzed clinical as well as laboratory data in detail.ResultsOverall, 22 severely immunosuppressed patients, excluding solid organ transplant recipients, were identified. Four patients did not experience viral clearance (one without and three despite ribavirin therapy). Three patients acquired the infection after allogeneic hematopoietic stem cell transplantation (alloHSCT) and recovered spontaneously, whereas another patient, infected prior to alloHSCT, developed a chronic infection. Four patients failed to clear HEV, resulting in fatal liver failure in two patients. The CD4+ cell counts increased in all but one patient attaining a sustained virological response (SVR), as compared to patients with clinical failure. Severe immunoglobulin deficiency did not appear to obviate the control of HEV. Six of ten (60%) patients with and nine of twelve (75%) patients without ribavirin therapy achieved a SVR.ConclusionsUpfront ribavirin therapy does not appear mandatory in patients without CD4+ lymphopenia, but a prolonged HEV-replication carries the risk of liver failure. Our data suggest that chronic HEV-infections could cause T-cell exhaustion, which might be overruled with ribavirin therapy

Impact of surface defects on LaNiO3 perovskite electrocatalysts for the oxygen evolution reaction

Perovskite oxides are regarded as promising electrocatalysts for water splitting due to their cost-effectiveness, high efficiency and durability in the oxygen evolution reaction (OER). Despite these advantages, a fundamental understanding of how critical structural parameters of perovskite electrocatalysts influence their activity and stability is lacking. Here, we investigate the impact of structural defects on OER performance for representative LaNiO3 perovskite electrocatalysts. Hydrogen reduction of 700¿°C calcined LaNiO3 induces a high density of surface oxygen vacancies, and confers significantly enhanced OER activity and stability compared to unreduced LaNiO3; the former exhibit a low onset overpotential of 380 mV at 10 mA¿cm-2 and a small Tafel slope of 70.8 mV¿dec-1. Oxygen vacancy formation is accompanied by mixed Ni2+/Ni3+ valence states, which quantum-chemical DFT calculations reveal modify the perovskite electronic structure. Further, it reveals that the formation of oxygen vacancies is thermodynamically more favourable on the surface than in the bulk; it increases the electronic conductivity of reduced LaNiO3 in accordance with the enhanced OER activity that is observed.Peer ReviewedPostprint (author's final draft

Lanthanide(III) Complexes of Novel Mixed Carboxylic-Phosphorus Acid Derivatives of Diethylenetriamine: A Step towards More Efficient MRI Contrast Agents

Three novel phosphorus-containing analogues of H5DTPA (DTPA = diethylenetriaminepentaacetate) were synthesised (H6L1, H5L2, H5L3). These compounds have a -CH2-P(O)(OH)-R function (R = OH, Ph, CH2NBn2) attached to the central nitrogen atom of the diethylenetriamine backbone. An NMR study reveals that these ligands bind to lanthanide(III) ions in an octadentate fashion through the three nitrogen atoms, a P-O oxygen atom and four carboxylate oxygen atoms. The complexed ligand occurs in several enantiomeric forms due to the chirality of the central nitrogen atom and the phosphorus atom upon coordination. All lanthanide complexes studied have one coordinated water molecule. The residence times (tau) of the coordinated water molecules in the gadolinium(III) complexes of H6L1 and H5L2 are 88 and 92 ns, respectively, which are close to the optimum. This is particularly important upon covalent and noncovalent attachment of these Gd3+ chelates to polymers. The relaxivity of the complexes studied is further enhanced by the presence of at least two water molecules in the second coordination sphere of the Gd3+ ion, which are probably bound to the phosphonate/phosphinate moiety by hydrogen bonds. The complex [Gd(L3)(H2O)]2- shows strong binding ability to HSA, and the adduct has a relaxivity comparable to MS-325 (40 s-1 mM-1 at 40 MHz, 37 °C) even though it has a less favourable tauM value (685 ns). Transmetallation experiments with Zn2+ indicate that the complexes have a kinetic stability that is comparable to - or better than - those of [Gd(dtpa)(H2O)]2- and [Gd(dtpa-bma)(H2O)]

A four-organ-chip for interconnected long-term co-culture of human intestine, liver, skin and kidney equivalents

Systemic absorption and metabolism of drugs in the small intestine, metabolism by the liver as well as excretion by the kidney are key determinants of efficacy and safety for therapeutic candidates. However, these systemic responses of applied substances lack in most in vitro assays. In this study, a microphysiological system maintaining the functionality of four organs over 28 days in co-culture has been established at a minute but standardized microsystem scale. Preformed human intestine and skin models have been integrated into the four-organ-chip on standard cell culture inserts at a size 100000-fold smaller than their human counterpart organs. A 3D-based spheroid, equivalent to ten liver lobules, mimics liver function. Finally, a barrier segregating the media flow through the organs from fluids excreted by the kidney has been generated by a polymeric membrane covered by a monolayer of human proximal tubule epithelial cells. A peristaltic on-chip micropump ensures pulsatile media flow interconnecting the four tissue culture compartments through microfluidic channels. A second microfluidic circuit ensures drainage of the fluid excreted through the kidney epithelial cell layer. This four-organ-chip system assures near to physiological fluid-to-tissue ratios. In-depth metabolic and gene analysis revealed the establishment of reproducible homeostasis among the co-cultures within two to four days, sustainable over at least 28 days independent of the individual human cell line or tissue donor background used for each organ equivalent. Lastly, 3D imaging two-photon microscopy visualised details of spatiotemporal segregation of the two microfluidic flows by proximal tubule epithelia. To our knowledge, this study is the first approach to establish a system for in vitro microfluidic ADME profiling and repeated dose systemic toxicity testing of drug candidates over 28 days.BMBF, 0315569, GO-Bio 3: Multi-Organ-Bioreaktoren für die prädiktive Substanztestung im Chipforma