Magnetic patterning of (Ga,Mn)As by hydrogen passivation

We present an original method to magnetically pattern thin layers of (Ga,Mn)As. It relies on local hydrogen passivation to significantly lower the hole density, and thereby locally suppress the carrier-mediated ferromagnetic phase. The sample surface is thus maintained continuous, and the minimal structure size is of about 200 nm. In micron-sized ferromagnetic dots fabricated by hydrogen passivation on perpendicularly magnetized layers, the switching fields can be maintained closer to the continuous film coercivity, compared to dots made by usual dry etch techniques

Field-induced domain wall propagation: beyond the one-dimensional model

We have investigated numerically the field-driven propagation of perpendicularly magnetized ferromagnetic layers. It was then compared to the historical one-dimensional domain wall (DW) propagation model widely used in spintronics studies of magnetic nanostructures. In the particular regime of layer thickness (h) of the order of the exchange length, anomalous velocity peaks appear in the precessional regime, their shape and position shifting with h. This has also been observed experimentally. Analyses of the simulations show a distinct correlation between the curvature of the DW and the twist of the magnetization vector within it, and the velocity peak. Associating a phenomenological description of this twist with a four-coordinate DW propagation model, we reproduce very well these kinks and show that they result from the torque exerted by the stray field created by the domains on the twisted magnetization. The position of the peaks is well predicted from the DW's first flexural mode frequency, and depends strongly on the layer thickness. Comparison of the proposed model to DW propagation data obtained on dilute semiconductor ferromagnets GaMnAs and GaMnAsP sheds light on the origin of the measured peaks

Determination of the micromagnetic parameters in (Ga,Mn)As using domain theory

The magnetic domain structure and magnetic properties of a ferromagnetic (Ga,Mn)As epilayer with perpendicular magnetic easy-axis are investigated. We show that, despite strong hysteresis, domain theory at thermodynamical equilibrium can be used to determine the micromagnetic parameters. Combining magneto-optical Kerr microscopy, magnetometry and ferromagnetic resonance measurements, we obtain the characteristic parameter for magnetic domains $\lambda_c$, the domain wall width and specific energy, and the spin stiffness constant as a function of temperature. The nucleation barrier for magnetization reversal and the Walker breakdown velocity for field-driven domain wall propagation are also estimated

Effect of picosecond strain pulses on thin layers of the ferromagnetic semiconductor (Ga,Mn)(As,P)

The effect of picosecond acoustic strain pulses (ps-ASP) on a thin layer of (Ga,Mn)As co-doped with phosphorus was probed using magneto-optical Kerr effect (MOKE). A transient MOKE signal followed by low amplitude oscillations was evidenced, with a strong dependence on applied magnetic field, temperature and ps-ASP amplitude. Careful interferometric measurement of the layer's thickness variation induced by the ps-ASP allowed us to model very accurately the resulting signal, and interpret it as the strain modulated reflectivity (differing for $\sigma_{\pm}$ probe polarizations), independently from dynamic magnetization effects.Comment: 6 pages, 5 figure

Irreversible magnetization switching using surface acoustic waves

An analytical and numerical approach is developped to pinpoint the optimal experimental conditions to irreversibly switch magnetization using surface acoustic waves (SAWs). The layers are magnetized perpendicular to the plane and two switching mechanisms are considered. In precessional switching, a small in-plane field initially tilts the magnetization and the passage of the SAW modifies the magnetic anisotropy parameters through inverse magneto-striction, which triggers precession, and eventually reversal. Using the micromagnetic parameters of a fully characterized layer of the magnetic semiconductor (Ga,Mn)(As,P), we then show that there is a large window of accessible experimental conditions (SAW amplitude/wave-vector, field amplitude/orientation) allowing irreversible switching. As this is a resonant process, the influence of the detuning of the SAW frequency to the magnetic system's eigenfrequency is also explored. Finally, another - non-resonant - switching mechanism is briefly contemplated, and found to be applicable to (Ga,Mn)(As,P): SAW-assisted domain nucleation. In this case, a small perpendicular field is applied opposite the initial magnetization and the passage of the SAW lowers the domain nucleation barrier.Comment: 11 pages, 4 figure

Magnetic properties and domain structure of (Ga,Mn)As films with perpendicular anisotropy

The ferromagnetism of a thin GaMnAs layer with a perpendicular easy anisotropy axis is investigated by means of several techniques, that yield a consistent set of data on the magnetic properties and the domain structure of this diluted ferromagnetic semiconductor. The magnetic layer was grown under tensile strain on a relaxed GaInAs buffer layer using a procedure that limits the density of threading dislocations. Magnetometry, magneto-transport and polar magneto-optical Kerr effect (PMOKE) measurements reveal the high quality of this layer, in particular through its high Curie temperature (130 K) and well-defined magnetic anisotropy. We show that magnetization reversal is initiated from a limited number of nucleation centers and develops by easy domain wall propagation. Furthermore, MOKE microscopy allowed us to characterize in detail the magnetic domain structure. In particular we show that domain shape and wall motion are very sensitive to some defects, which prevents a periodic arrangement of the domains. We ascribed these defects to threading dislocations emerging in the magnetic layer, inherent to the growth mode on a relaxed buffer

Ion-beam mixing induced by atomic and cluster bombardment in the electronic stopping-power regime

Single crystals of magnesium oxide containing nanoprecipitates of sodium were bombarded with swift ions (∼GeV-Pb, U) or cluster beams (∼20 MeV-C60) to study the phase change induced by electronic processes at high stopping power (≳10 keV/nm). The sodium precipitates and the defect creation were characterized by optical absorption and transmission electron microscopy. The ion or cluster bombardment leads to an evolution of the Na precipitate concentration but the size distribution remains unchanged. The decrease in Na metallic concentration is attributed to mixing effects at the interfaces between Na clusters and MgO. In addition, optical-absorption measurements show a broadening of the absorption band associated with electron plasma oscillations in Na clusters. This effect is due to a decrease of the electron mean free path, which could be induced by defect creation in the metal. All these results show an influence of high electronic stopping power in materials known to be very resistant to irradiation with weak ionizing projectiles. The dependence of these effects on electronic stopping power and on various solid-state parameters is discussed