Simultano UV-spektrofotometrijsko određivanje ramiprila, acetilsalicilne kiseline i atorvastatin kalcija u kapsulama primjenom kemometrijskih metoda

In the present work, three different spectrophotometric methods for simultaneous estimation of ramipril, aspirin and atorvastatin calcium in raw materials and in formulations are described. Overlapped data was quantitatively resolved by using chemometric methods, viz. inverse least squares (ILS), principal component regression (PCR) and partial least squares (PLS). Calibrations were constructed using the absorption data matrix corresponding to the concentration data matrix. The linearity range was found to be 1-5, 10-50 and 2-10 µg mL–1 for ramipril, aspirin and atorvastatin calcium, respectively. The absorbance matrix was obtained by measuring the zero-order absorbance in the wavelength range between 210 and 320 nm. A training set design of the concentration data corresponding to the ramipril, aspirin and atorvastatin calcium mixtures was organized statistically to maximize the information content from the spectra and to minimize the error of multivariate calibrations. By applying the respective algorithms for PLS 1, PCR and ILS to the measured spectra of the calibration set, a suitable model was obtained. This model was selected on the basis of RMSECV and RMSEP values. The same was applied to the prediction set and capsule formulation. Mean recoveries of the commercial formulation set together with other figures of merit (calibration sensitivity, selectivity, limit of detection, limit of quantification and analytical sensitivity) were estimated. Validity of the proposed approaches was successfully assessed for analyses of drugs in the various prepared physical mixtures and formulations.U radu su opisane tri različite spektrofotometrijske metode za određivanje ramiprila, acetilsalicilne kiseline i atorvastatin kalcija u sirovinama i formulacijama. Preklapanje podataka kvantitativno je riješeno pomoću kemometrijskih metoda, tj. metodama inverznih najmanjih kvadrata (ILS), regresije glavnog sastojka (PCR) i djelomičnih najmanjih kvadrata (PLS). Kalibracije su postavljene pomoću matrice podataka za apsorpciju koja odgovara matrici pripadajućih koncentracija. Područje linearnosti za ramipril iznosilo je 1–5, za acetilsalicilnu kiselinu 10–50, a za atorvastatin kalcij 2–10 µg mL–1. Matrica s apsorbancijama dobivena je mjerenjem apsorbancije nultog reda na valnim duljinama između 210 i 320 nm. Set podataka za koncentracije ramiprila, acetilsalicilne kiseline i atorvastatin kalcija u smjesi statistički je tako organiziran da osigura maksimalnu količinu informacije u spektrima i minimalizira grešku multivarijantnih kalibracija. Primjenom odgovarajućih algoritama za PLS, PCR i ILS na snimljene spektre kalibracijskog seta dobiven je dobar model, koji je odabran na temelju RMSECV i RMSEP vrijednosti. Isti model je primijenjen i na set s predviđenim vrijednostima i na kapsule sa smjesom ove tri ljekovite tvari. Određena je srednja vrijednost povrata za komercijalnu formulaciju te ostale analitičke izvedbene značajke (kalibracijska osjetljivost, selektivnost, granica dokazivanja, granica određivanja i analitička osjetljivost). Potvrđena je primjenjljivost predloženih metoda u analizama lijekova u fizičkim smjesama i u gotovim ljekovitim oblicima

Development of empirical relationships for prediction of mechanical and wear properties of AA6082 aluminum matrix composites produced using friction stir processing

AbstractFriction Stir Processing (FSP) has been established as a potential solid state production method to prepare aluminum matrix composites (AMCs). FSP was effectively applied to produce AA6082 AMCs reinforced with various ceramic particles such as SiC, Al2O3, TiC, B4C and WC in this work. Empirical relationships were estimated to predict the influence of FSP process parameters on the properties such as area of stir zone, microhardness and wear rate of AMCs. FSP experiments were executed using a central composite rotatable design consisting of four factors and five levels. The FSP parameters analyzed were tool rotational speed, traverse speed, groove width and type of ceramic particle. The effect of those parameters on the properties of AMCs was deduced using the developed empirical relationships. The predicted trends were explained with the aid of observed macro and microstructures

Fabrication of Planar Perovskite Solar Cells Using Ternary Metal Oxide Nanocomposite as Hole-Transporting Material

This work uses a hole-transporting copper cobaltite/copper oxide nanocomposite to fabricate carbon-based MAPbI3 PSCs. The copper cobaltite/copper oxide HTM-based PSC results show the highest power conversion efficiency (PCE = 7.32%) compared with an HTM-free device. The highest photocurrent density (Jsc = 15.17 mA/cm2), open-circuit voltage (Voc = 0.82 V), and fill factor (FF = 0.59) are achieved for the PSC fabricated with hydrothermally synthesized copper cobaltite/copper oxide nanocomposites. Electrochemical impedance spectroscopy is used to analyze the charge transfer resistance (Rs) and the capacitive behavior of copper cobaltite/copper oxide nanocomposite. The maximum electron lifetime of 35.16 μs is witnessed for the PSCs fabricated with 3 mg mL−1 of copper cobaltite/copper oxide (H1). The efficiency of the copper cobaltite/copper oxide-based PSC remains unchanged, showing no further perovskite layer degradation