Sericin removal from raw Bombyx mori silk scaffolds of high hierarchical order

Silk fibroin has previously been described as a promising candidate for ligament tissue engineering (TE) approaches. For biocompatibility reasons, silkworm silk requires removal of sericin, which can elicit adverse immune responses in the human body. One disadvantage of the required degumming process is the alteration of the silk fiber structural properties, which can hinder textile engineering of high order hierarchical structures. Therefore, the aim of this study was to find a way to remove sericin from a compact and highly ordered raw silk fiber matrix. The wire rope design of the test model scaffold comprises several levels of geometric hierarchy. Commonly used degumming solutions fail in removing sericin in this wire rope design. Weight loss measurements, picric acid and carmine staining as well as scanning electron microscopy demonstrated that the removal of sericin from the model scaffold of a wire rope design can be achieved through a borate buffer-based system. Furthermore, the borate buffer degummed silks were shown to be nontoxic and did not alter cell proliferation behavior. The possibility to remove sericin after the textile engineering process has taken place eases the production of highly ordered scaffold structures and may expand the use of silk as scaffold material in further TE and regenerative medicine applications

Phototherapy with LED light modulates healing processes in an in vitro scratch-wound model using 3 different cell types

BACKGROUND: An effective way of modulating wound healing processes, including proliferation and apoptosis, is low-level light therapy. Because of several disadvantages of lasers, light-emitting diodes (LEDs) could be more feasible light sources. OBJECTIVE: To evaluate and compare the effects of blue and red light from LEDs on different cell types in an in vitro scratch-wound model. METHODS: Monolayers of C2C12 myoblasts, NIH/3T3 fibroblasts, and BICR10 keratinocytes were injured by mechanical scraping. Cells were illuminated on 5 consecutive days for 10 minutes by LED at 470 or 630 nm. Effects of light on in vitro wound healing were evaluated by analyzing time to closure, proliferation, apoptosis, and necrosis rates. RESULTS: Illumination substantially affected cell viability and cell growth. Blue light strongly decreased proliferation and augmented apoptosis in all 3 cell types and increased necrosis rates in C2C12 and NIH/3T3 cells. In contrast, red light did not alter apoptosis in either cell type but promoted proliferation in all 3 cell types with significant effects in C2C12 and NIH/3T3 cells and shortened time to closure in all 3 cell types. CONCLUSION: Light-emitting diode light illumination could be a therapeutic option and positively affect wound healing processes. By choosing appropriate wavelengths, variable effects can be achieved

A Novel Silk Fiber-Based Scaffold for Regeneration of the Anterior Cruciate Ligament:Histological Results From a Study in Sheep

BACKGROUND: Because of ongoing problems with anterior cruciate ligament (ACL) reconstruction, new approaches in the treatment of ACL injuries, particularly strategies based on tissue engineering, have gained increasing research interest. To allow for ACL regeneration, a structured scaffold that provides a mechanical basis, has cells from different sources, and comprises mechanical as well as biological factors is needed. Biological materials, biodegradable polymers, and composite materials are being used and tested as scaffolds. The optimal scaffold for ACL regeneration should be biocompatible and biodegradable to allow tissue ingrowth but also needs to have the right mechanical properties to provide immediate mechanical stability. HYPOTHESES: The study hypotheses were that (1) a novel degradable silk fiber-based scaffold with mechanical properties similar to the native ACL will be able to initiate ligament regeneration after ACL resection and reconstruction under in vivo conditions and (2) additional cell seeding of the scaffold with autologous stromal vascular fraction-containing adipose-derived stem cells will increase regenerative activity. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 33 mountain sheep underwent ACL resection and randomization to 2 experimental groups: (1) ACL reconstruction with a scaffold alone and (2) ACL reconstruction with a cell-seeded scaffold. Histological evaluation of the intra-articular portion of the reconstructed/regenerated ligament was performed after 6 and 12 months. RESULTS: After 6 months, connective tissue surrounded the silk scaffold with ingrowth in some areas. The cell-seeded scaffolds had a significant lower silk content compared with the unseeded scaffolds and demonstrated a higher content of newly formed tissue. After 12 months, the density of the silk fibers decreased significantly, and the ingrowth of newly formed tissue increased in both groups. No differences between the 2 groups regarding silk fiber degradation and regenerated tissue were detected at 12 months. CONCLUSION: The novel silk fiber-based scaffold was able to stimulate ACL regeneration under in vivo conditions. Additional cell seeding led to increased tissue regeneration and decreased silk fiber content at 6 months, whereas these differences were not present at 12 months. CLINICAL RELEVANCE: ACL regeneration using a silk fiber-based scaffold with and without additional cell seeding may provide a new treatment option after joint injuries

A New Preparation Method for Anisotropic Silk Fibroin Nerve Guidance Conduits and Its Evaluation In Vitro and in a Rat Sciatic Nerve Defect Model

Over the past decade, silk fibroin (SF) has been emergently used in peripheral nerve tissue engineering. Current approaches aiming at producing SF-based nerve guidance conduits (SF-NGCs) used dissolved silk based on either aqueous solutions or organic solvents. In this study, we describe a novel procedure to produce SF-NGCs: A braided tubular structure of raw Bombyx mori silk is subsequently processed with the ternary solvent CaCl2/H2O/ethanol, formic acid, and methanol to improve its mechanical and topographical characteristics. Topographically, the combination of the treatments results in a fusion of the outer single silk fibers to a closed layer with a thickness ranging from about 40 to 75 mum. In contrast to the outer wall, the inner lumen (not treated with processing solvents) still represents the braided structure of single fibers. Mechanical stability, elasticity, and kink characteristics were evaluated with a custom-made test system. The modification procedure described here drastically improved the elastic properties of our tubular raw scaffold, favoring its use as a NGC. A cell migration assay with NIH/3T3-fibroblasts revealed the impermeability of the SF-NGC wall for possible invading and scar-forming cells. Moreover, the potential of the SF-NGC to serve as a substratum for Schwann cells has been demonstrated by cytotoxicity tests and live-dead stainings of Schwann cells grown on the inner surface of the SF-NGC. In vivo, the SF-NGC was tested in a rat sciatic nerve injury model. In short-term in vivo studies, it was proved that SF-NGCs are not triggering host inflammatory reactions. After 12 weeks, we could demonstrate morphological and functional reinnervation of the distal targets. Filled with collagen, a higher number of axons could be found in the distal to the graft (1678+/-303), compared with the empty SF-NGC (1274+/-146). The novel SF-NGC presented here shows promising results for the treatment of peripheral nerve injuries. The modification of braided structures to adapt their mechanical and topographical characteristics may support the translation of SF-based scaffolds into the clinical setting. However, further improvements and the use of extracellular matrix molecules and Schwann cells are suggested to enable silk tube based conduits to bridge long-distance nerve gaps

A Low Cost Implantation Model in the Rat That Allows a Spatial Assessment of Angiogenesis

There is continual demand for animal models that allow a quantitative assessment of angiogenic properties of biomaterials, therapies, and pharmaceuticals. In its simplest form, this is done by subcutaneous material implantation and subsequent vessel counting which usually omits spatial data. We have refined an implantation model and paired it with a computational analytic routine which outputs not only vessel count but also vessel density, distribution, and vessel penetration depth, that relies on a centric vessel as a reference point. We have successfully validated our model by characterizing the angiogenic potential of a fibrin matrix in conjunction with recombinant human vascular endothelial growth factor (rhVEGF165). The inferior epigastric vascular pedicles of rats were sheathed with silicone tubes, which were subsequently filled with 0.2 ml of fibrin and different doses of rhVEGF165, centrically embedding the vessels. Over 4 weeks, tissue samples were harvested and subsequently immunohistologically stained and computationally analyzed. The model was able to detect variations over the angiogenic potentials of growth factor spiked fibrin matrices. Adding 20 ng of rhVEGF165 resulted in a significant increase in vasculature while 200 ng of rhVEGF165 did not improve vascular growth. Vascularized tissue volume increased during the first week and vascular density increased during the second week. Total vessel count increased significantly and exhibited a peak after 2 weeks which was followed by a resorption of vasculature by week 4. In summary, a simple implantation model to study in vivo vascularization with only a minimal workload attached was enhanced to include morphologic data of the emerging vascular tree

Enhanced cell adhesion on silk fibroin via lectin surface modification

Various tissue engineering (TE) approaches are based on silk fibroin (SF) as scaffold material because of its superior mechanical and biological properties compared to other materials. The translation of one-step TE approaches to clinical application has generally failed so far due to the requirement of a prolonged cell seeding step before implantation. Here, we propose that the plant lectin WGA (wheat germ agglutinin), covalently bound to SF, will mediate cell adhesion in a time frame acceptable to be part of a one-step surgical intervention. After the establishment of a modification protocol utilizing carbodiimide chemistry, we examined the attachment of cells, with a special focus on adipose-derived stromal cells (ASC), on WGA-SF compared to pure native SF. After a limited time frame of 20min the attachment of ASCs to WGA-SF showed an increase of about 17-fold, as compared to pure native SF. The lectin-mediated cell adhesion further showed an enhanced resistance to trypsin (as a protease model) and to applied fluid shear stress (mechanical stability). Moreover, we could demonstrate that the adhesion of ASCs on the WGA-SF does not negatively influence proliferation or differentiation potential into the osteogenic lineage. To test for in vitro immune response, the proliferation of peripheral blood mononuclear cells in contact with the WGA-SF was determined, showing no alterations compared to plain SF. All these findings suggest that the WGA modification of SF offers important benefits for translation of SF scaffolds into clinical applications

Optimization of hyaluronic acid-tyramine/silk-fibroin composite hydrogels for cartilage tissue engineering and delivery of anti-inflammatory and anabolic drugs

Injury of articular cartilage leads to an imbalance in tissue homeostasis, and due to the poor self-healing capacity of cartilage the affected tissue often exhibits osteoarthritic changes. In recent years, injectable and highly tunable composite hydrogels for cartilage tissue engineering and drug delivery have been introduced as a desirable alternative to invasive treatments. In this study, we aimed to formulate injectable hydrogels for drug delivery and cartilage tissue engineering by combining different concentrations of hyaluronic acid-tyramine (HA-Tyr) with regenerated silk-fibroin (SF) solutions. Upon enzymatic crosslinking, the gelation and mechanical properties were characterized over time. To evaluate the effect of the hydrogel compositions and properties on extracellular matrix (ECM) deposition, bovine chondrocytes were embedded in enzymatically crosslinked HA-Tyr/SF composites (in further work abbreviated as HA/SF) or HA-Tyr hydrogels. We demonstrated that all hydrogel formulations were cytocompatible and could promote the expression of cartilage matrix proteins allowing chondrocytes to produce ECM, while the most prominent chondrogenic effects were observed in hydrogels with HA20/SF80 polymeric ratios. Unconfined mechanical testing showed that the compressive modulus for HA20/SF80 chondrocyte-laden constructs was increased almost 10-fold over 28 days of culture in chondrogenic medium which confirmed the superior production of ECM in this hydrogel compared to other hydrogels in this study. Furthermore, in hydrogels loaded with anabolic and anti-inflammatory drugs, HA20/SF80 hydrogel showed the longest and the most sustained release profile over time which is desirable for the long treatment duration typically necessary for osteoarthritic joints. In conclusion, HA20/SF80 hydrogel was successfully established as a suitable injectable biomaterial for cartilage tissue engineering and drug delivery applications

Strain-induced bands of Büngner formation promotes axon growth in 3D tissue-engineered constructs

Treatment of peripheral nerve lesions remains a major challenge due to poor functional recovery; hence, ongoing research efforts strive to enhance peripheral nerve repair. In this study, we aimed to establish three-dimensional tissue-engineered bands of Büngner constructs by subjecting Schwann cells (SCs) embedded in fibrin hydrogels to mechanical stimulation. We show for the first time that the application of strain induces (i) longitudinal alignment of SCs resembling bands of Büngner, and (ii) the expression of a pronounced repair SC phenotype as evidenced by upregulation of BDNF, NGF, and p75 NTR . Furthermore, we show that mechanically aligned SCs provide physical guidance for migrating axons over several millimeters in vitro in a co-culture model with rat dorsal root ganglion explants. Consequently, these constructs hold great therapeutic potential for transplantation into patients and might also provide a physiologically relevant in vitro peripheral nerve model for drug screening or investigation of pathologic or regenerative processes