Primary stability of cementless threaded acetabular cups at first implantation and in the case of revision regarding micromotions as indicators

The primary stability of cementless total hip endoprosthesis is of vital importance for proximate, long-term osteointegration. The extent of micromotions between implant and acetabulum is an indicator of primary stability. Based on this hypothesis, different cementless hip joint endoprosthesis were studied with regard to their micromotions. The primary stability of nine different cementless threaded acetabular cups was studied in an experimental setup with blocks of rigid foam. The micromotions between implant and implant bearing were therefore evaluated under cyclic, sinusoidal exposure. The blocks of polymer foam were prepared according to the Paprosky defect classifications. The micromotions increased with the increasing degree of the defect with all acetabuli tested. Occasionally coefficients of over 200 mu m were measured. From a defect degree of 3b according to Paprosky, the implants could no longer be appropriately placed. The exterior form of the spherical implants tended to exhibit better coefficients than the conical/parabolic implants

Late Periprosthetic Joint Infection due to Staphylococcus lugdunensis Identified by Matrix-Assisted Laser Desorption/Ionisation Time of Flight Mass Spectrometry: A Case Report and Review of the Literature

Staphylococcus lugdunensis, member to the group of coagulase-negative staphylococci, is previously thought to be rarely isolated. Recently other staphylococci have been described, which were supposedly related to S. lugdunensis, such as Staphylococcus pseudolugdunensis and Staphylococcus pettenkoferi. To decrease the rate misidentifications, an accurate identification method, such as matrix-assisted laser desorption ionization time of flight mass spectrometry or molecular methods, should be used. S. lugdunensis is usually associated with severe infections similar to those caused by S. aureus. Moreover, it has been described that skin infections due to S. lugdunensis are severely underreported and could be also underreported in periprosthetic joint infections. Ours is the first case of a late periprosthetic infection of the hip due to S. lugdunensis, identified by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry. A periprosthetic infection due to S. lugdunensis should be treated according to protocols of S. aureus periprosthetic infections, and therefore an accurate species identification is desirable

Anatomical and surgical study of volume determination of the anterolateral epidural space nerve root L5/S1 under the aspect of epidural perineural injection in minimal invasive treatment of lumbar nerve root compression

Herniated intervertebral disc causes in a great number of cases of lumbar nerve root compression, especially in the segment L5/S1. Other reasons responsible for stress to the lumbar spinal root are the spinal canal stenosis and the postdiscotomy syndrome. For patients without neurological deficiencies, the conservative treatment includes different epidural injection techniques. Steroids are often applied. A specific injection technique needing only a small drug amount is the epidural perineural approach using a special two-needle technique. The anatomical spaces of the nerve roots have received little attention in therapy. We have determined the anterolateral epidural space nerve volume of the nerve root L5/S1, and compared the data collected in an anatomical study with operative measurements during discectomy. The volume determination in the human cadavers was performed with liquid silicone filling the anterolateral space after dissection. The in vivo measurements were performed during surgery at the site of the anterolateral space after discectomy. The anatomical studies showed us a mean value volume of 1.1 ml. The surgical volume determinations result in a mean volume of 0.9 ml. A better understanding of the anterolateral epidural space may allow a reduction of the injection volume in the conservative nerve root compression treatment, especially using the epidural perineural technique, avoiding the risk of side effects of high doses of steroids

Does osteoporosis reduce the primary tilting stability of cementless acetabular cups?

Background: Cementless hip cups need sufficient primary tilting stability to achieve osseointegration. The aim of the study was to assess differences of the primary implant stability in osteoporotic bone and in bone with normal bone density. To assess the influence of different cup designs, two types of threaded and two types of press-fit cups were tested. Methods: The maximum tilting moment for two different cementless threaded cups and two different cementless press-fit cups was determined in macerated human hip acetabuli with reduced (n=20) and normal bone density (n=20),determined using Q-CT. The tilting moments for each cup were determined five times in the group with reduced bone density and five times in the group with normal bone density, and the respective average values were calculated. Results: The mean maximum extrusion force of the threaded cup Zintra was 5670.5 N (max. tilting moment 141.8 Nm) in bone with normal density and. 5748.3 N (max. tilting moment 143.7 Nm) in osteoporotic bone. For the Hofer Imhof (HI) threaded cup it was 7681.5 N (192.0 Nm) in bone with normal density and 6828.9 N (max. tilting moment 170.7 Nm) in the group with osteoporotic bone. The mean maximum extrusion force of the macro-textured press-fit cup Metallsockel CL was 3824.6 N (max. tilting moment 95.6 Nm) in bone with normal and 2246.2 N (max. tilting moment 56.2 Nm) in osteoporotic bone. For the Monoblock it was 1303.8 N (max. tilting moment 32.6 Nm) in normal and 1317 N (max. tilting moment 32.9 Nm) in osteoporotic bone. There was no significance. A reduction of the maximum tilting moment in osteoporotic bone of the ESKA press-fit cup Metallsockel CL was noticed. Conclusion: Results on macerated bone specimens showed no statistically significant reduction of the maximum tilting moment in specimens with osteoporotic bone density compared to normal bone, neither for threaded nor for the press-fit cups. With the limitation that the results were obtained using macerated bone, we could not detect any restrictions for the clinical indication of the examined cementless cups in osteoporotic bone

Single-hole dynamics in dimerized and frustrated spin-chains

We present a unified account for the coupled single-hole- and spin-dynamics in the spin-gap phase of dimerized and frustrated spin-chains and two-leg spin ladders. Based on the strong dimer-limit of a one-dimensional $t_123$-$J_123$-model a diagrammatic approach is presented which employs a mapping of the spin-Hamiltonian onto a pseudo-fermion bond-boson model. Results for the single-hole spectrum are detailed. A finite quasi-particle weight is observed and studied for a variety of system parameters. A comparison with existing exact diagonalization data is performed and good agreement is found.Comment: 10 pages, 12 figure

The Nomenclature, Definition and Distinction of Types of Shock

Background: A severe mismatch between the supply and demand of oxygen is the common feature of all types of shock. We present a newly developed, clinically oriented classification of the various types of shock and their therapeutic implications. Methods: This review is based on pertinent publications (1990-2018) retrieved by a selective search in PubMed, and on the relevant guidelines and meta-analyses. Results: There are only four major categories of shock, each of which is mainly related to one of four organ systems. Hypovolemic shock relates to the blood and fluids compartment while distributive shock relates to the vascular system; cardiogenic shock arises from primary cardiac dysfunction; and obstructive shock arises from a blockage of the circulation. Hypovolemic shock is due to intravascular volume loss and is treated by fluid replacement with balanced crystalloids. Distributive shock, on the other hand, is a state of relative hypovolemia resulting from pathological redistribution of the absolute intravascular volume and is treated with a combination of vasoconstrictors and fluid replacement. Cardiogenic shock is due to inadequate function of the heart, which shall be treated, depending on the situation, with drugs, surgery, or other interventional procedures. In obstructive shock, hypoperfusion due to elevated resistance shall be treated with an immediate life-saving intervention. Conclusion: The new classification is intended to facilitate the goal-driven treatment of shock in both the pre-hospital and the inpatient setting. A uniform treatment strategy should be established for each of the four types of shock