Biobased poly(ethylene furanoate-:Co -ethylene succinate) copolyesters: Solid state structure, melting point depression and biodegradability

Novel, biobased poly(ethylene furanoate-co-ethylene succinate) copolyesters were successfully prepared by melt polycondensation and their solid state structure, melting point depression and biodegradability were evaluated in detail.</p

Preliminary Evaluation of 3D Printed Chitosan/Pectin Constructs for Biomedical Applications

In the present study, chitosan (CS) and pectin (PEC) were utilized for the preparation of 3D printable inks through pneumatic extrusion for biomedical applications. CS is a polysaccharide with beneficial properties; however, its printing behavior is not satisfying, rendering the addition of a thickening agent necessary, i.e., PEC. The influence of PEC in the prepared inks was assessed through rheological measurements, altering the viscosity of the inks to be suitable for 3D printing. 3D printing conditions were optimized and the effect of different drying procedures, along with the presence or absence of a gelating agent on the CS-PEC printed scaffolds were assessed. The mean pore size along with the average filament diameter were measured through SEM micrographs. Interactions among the characteristic groups of the two polymers were evident through FTIR spectra. Swelling and hydrolysis measurements confirmed the influence of gelation and drying procedure on the subsequent behavior of the scaffolds. Ascribed to the beneficial pore size and swelling behavior, fibroblasts were able to survive upon exposure to the ungelated scaffolds

Physicochemical Characterization and Finite Element Analysis-Assisted Mechanical Behavior of Polylactic Acid-Montmorillonite 3D Printed Nanocomposites

This work aims to improve the properties of poly(lactic acid) (PLA) for future biomedical applications by investigating the effect of montmorillonite (MMT) nanoclay on physicochemical and mechanical behavior. PLA nanocomposite filaments were fabricated using different amounts of MMT (1.0, 2.0, and 4.0 wt.%) and 2 wt.% Joncryl chain extenders. The 3D-printed specimens were manufactured using Fused Filament Fabrication (FFF). The composites were characterized by Gel Permeation Chromatography (GPC), Melt Flow Index (MFI), X-ray Diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR). The thermal properties were studied by means of Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). Moreover, the hydrophilicity of the PLA/MMT nanocomposites was investigated by measuring the water contact angle. The mechanical behavior of the PLA/MMT nanocomposites was examined with nanoindentation, compression tests, and Dynamic Mechanical Analysis (DMA). The presence of Joncryl, as well as the pretreatment of MMT before filament fabrication, improved the MMT distribution in the nanocomposites. Furthermore, MMT enhanced the printability of PLA and improved the hydrophilicity of its surface. In addition, the results of nanoindentation testing coupled with Finite Element Analysis showed that as the MMT weight fraction increased, as well as an increased Young&rsquo;s modulus. According to the results of the mechanical analysis, the best mechanical behavior was achieved for PLA nanocomposite with 4 wt.% MMT

Dynamic Mechanical Characterization of Ternary Polylactide Nanocomposites Reinforced with Hybrid Montmorillonite/Carbon Nanotubes for HighPerformance Applications

International audienc

Properties of poly(lactic acid)/montmorillonite/carbon nanotubes nanocomposites: determination of percolation threshold

International audienc

Mechanical, thermal and decomposition behavior of poly(epsilon-caprolactone) nanocomposites with clay-supported carbon nanotube hybrids

Poly(epsilon-caprolactone) (PCL) nanocomposites with hybrid clay-supported carbon nanotubes (Clay-CNT) in concentrations 0.5, 1.0 and 2.5 wt% were prepared by melt mixing. Mechanical, structural and thermal properties of the nanocomposites were studied. All nanocomposites exhibited similar stress-strain patterns to those of neat PCL but, with increasing nanofiller content yield point and Young's Modulus values increased, despite the absence of chemical interactions between PCL and Clay-CNT. It was also found that the crystallinity of the nanocomposites is the same as for neat PCL, but the nanofiller acts as nucleating agent which promotes the crystallization and also allows it to occur at higher temperatures. Thermal stability is instead negatively influenced by the nanofiller, since Clay-CNT catalyzes the decomposition of PCL at lower temperature. The monomer epsilon-caprolactone is the main decomposition product resulting from intramolecular esterification while cis-elimination at ester bonds (beta-hydrogen bond scission) is favored at higher temperatures. (C) 2016 Elsevier B.V. All rights reserved

Sustainable, eco-friendly polyesters synthesized from renewable resources:Preparation and thermal characteristics of poly(dimethyl-propylene furanoate)

A novel, fully bio-based polyester, poly(dimethyl-propylene furanoate), has been synthesized from 2,5-furan dicarboxylic acid and its structural and thermal characteristics are presented for the first time.</p