26 research outputs found
Design report of the KISS-II facility for exploring the origin of uranium
One of the critical longstanding issues in nuclear physics is the origin of
the heavy elements such as platinum and uranium. The r-process hypothesis is
generally supported as the process through which heavy elements are formed via
explosive rapid neutron capture. Many of the nuclei involved in heavy-element
synthesis are unidentified, short-lived, neutron-rich nuclei, and experimental
data on their masses, half-lives, excited states, decay modes, and reaction
rates with neutron etc., are incredibly scarce. The ultimate goal is to
understand the origin of uranium. The nuclei along the pathway to uranium in
the r-process are in "Terra Incognita". In principle, as many of these nuclides
have more neutrons than 238U, this region is inaccessible via the in-flight
fragmentation reactions and in-flight fission reactions used at the present
major facilities worldwide. Therefore, the multi-nucleon transfer (MNT)
reaction, which has been studied at the KEK Isotope Separation System (KISS),
is attracting attention. However, in contrast to in-flight fission and
fragmentation, the nuclei produced by the MNT reaction have characteristic
kinematics with broad angular distribution and relatively low energies which
makes them non-amenable to in-flight separation techniques. KISS-II would be
the first facility to effectively connect production, separation, and analysis
of nuclides along the r-process path leading to uranium. This will be
accomplished by the use of a large solenoid to collect MNT products while
rejecting the intense primary beam, a large helium gas catcher to thermalize
the MNT products, and an MRTOF mass spectrograph to perform mass analysis and
isobaric purification of subsequent spectroscopic studies. The facility will
finally allow us to explore the neutron-rich nuclides in this Terra Incognita.Comment: Editors: Yutaka Watanabe and Yoshikazu Hirayam
Denoising application for electron spectrometer in laser-driven ion acceleration using a Simulation-supervised Learning based CDAE
Denoising application for electron spectrometer in laser-driven ion acceleration using a Simulation-supervised Learning based CDAE
Real experimental measurements in high-radiation environments often suffer from a high-flux of background noise which can limit the retrieval of the underlying signal. It is important to have an effective method to properly remove unwanted noise from measurement images. Machine learning methods using a multilayer neural network (deep learning) have been shown to be effective for extracting features from images. However, the efficacy of such methods is often restricted by a lack of high-quality training data. Here, we demonstrate the application for noise removal by performing simulations to generate virtual training data for a denoising deep-learning model. We first apply the model to simulations of an electron spectrometer measuring the energy spectra of electron beams accelerated from the interaction of an intense laser with a thin foil. By considering the chi-squared test and image test-indexes, namely the peak signal-to-noise ratio (PSNR) and structural similarity index measure (SSIM), we found our method to be highly effective. We then used the trained model to denoise real experimental measurements of the electron beam spectra from experiments performed at a state-of-the-art high-power laser facility. This application is offered as a new method for effectively removing noise from experimental data in high-flux radiation background environment
Denoising technique of an in-line electron energy spectrometer based on the feature filtering
On the experiment for laser-driven ion acceleration at J-KAREN-P[1] with pulse repetition rates of 0.1 Hz, the angular distribution of electron spectrum is diagnosed by multiple electron spectrometers. The electron spectrometer with comprising a bending magnet, a CCD camera and a scintillator is placed in the main vacuum chamber. When the laser focus on the target, many radiations generated in the main vacuum chamber, therefore, CCD camera is exposed to the radiation and distorted the measured images. We need to develop a new technique for removing noise (denoising) from a noisy image and recovering a true measurement image. In recent years, with the development of machine learning methods such as Deep-Learning, "Deep-Learning based Feature filtering" that uses a feature value of an image obtained from machine learning as a base and reproduces a true image from a noisy image is developed[2]. This filtering technique is a new technique of reconstructing a denoising image by separating noise and true data with the feature value of the true-image data. This technique expectes to be effective for the denoising of radiation. In order to demonstrate the feature filtering method, we make a pseudo-measured image generated from an ideal simulation of electron spectroscopy (using as the true-image data), and the noise-image data which make from the measured radiation noise convoluted with the pseudo-measured image (using as the noise-image data). Then, the ideal feature base is obtained by machine learning from the true-image data and the noise-image data, the feature filtering of the actually measured data is verified by using these the ideal feature base. In this report, we show the denoising performance of the feature filtering compared with "median filter" which is generally used for filtering of radiation noise.HEDS202
Ion species discrimination method by linear energy transfer measurement in Fujifilm BAS-SR Imaging Plate
We have developed a novel discrimination methodology to identify ions in multispecies beams with similar charge to mass ratios but different atomic numbers. After an initial separation by charge-to-mass ratio using co-linear electric and magnetic fields, individual ions can be discriminated by considering the Linear Energy Transfer and non-linear detector response of ions irradiating stimulable phosphor plate (Fujifilm imaging plate), by comparison with Monte-Carlo calculation. We apply the method to energetic multispecies laser-driven ion beams and use it to identify silver ions produced by the interaction between a high contrast, high intensity laser pulse and a sub-m silver foil target. We also show that this method can be used to calibrate imaging plate for arbitrary ion species without requiring individual calibration
Ion species discrimination method by linear energy transfer measurement in Fujifilm BAS-SR Imaging Plate
New algorithm using L1 regularization for measuring electron energy spectra
Retrieving the spectrum of physical radiation from experimental measurements typically involves using a mathematical algorithm to deconvolve the instrument response function from the measured signal. However, in the field of signal processing known as "Source Separation", which refers to the process of computationally retrieving the separate source components that generate an overlapping signal on the detector, the deconvolution process can become an ill-posed problem and crosstalk complicates the separation of the individual sources. To overcome this problem, we have designed a magnetic spectrometer for inline electron energy spectrum diagnosis and developed an analysis algorithm using techniques applicable to the problem of Source Separation. An unknown polychromatic electron spectrum is calculated by sparse coding using a Gaussian basis function and an L1 regularization algorithm with a sparsity constraint. This technique is verified by a specially designed magnetic field electron spectrometer. We use Monte Carlo simulations of the detector response to Maxwellian input energy distributions with electron temperatures of 5.0, 10.0 and 15.0 MeV to show that the calculated sparse spectrum can reproduce the input spectrum with an optimum energy bin width automatically selected by the L1 regularization. The spectra are reproduced with high accuracy of less than 4.0 % error, without an initial value. The technique is then applied to experimental measurements of intense laser accelerated electron beams from solid targets. Our analysis concept of spectral retrieval and automatic optimization of energy bin width by sparse coding could form the basis of a novel diagnostic method for spectroscopy