Recent Progress in Processing Cellulose Using Ionic Liquids as Solvents

Cellulose-based materials have attracted great attention due to the demand for eco-friendly materials and renewable energy alternatives. An increase in the use of these materials is expected in the coming years due to progressive decline in the supply of petrochemicals. Based on the limitations of cellulose in terms of dissolution/processing, and focused on green chemistry, new cellulose production techniques are emerging, such as dissolution and functionalization in ionic liquids which are known as green solvents. This review summarizes the recent ionic liquids used in processing cellulose, including pretreatment, hydrolysis, functionalization, and conversion into bio-based platform chemicals. The recent literatures investigating the progress that ILs have made in their transition from academia to commercial application of cellulosic biomass are also reviewed

Biosynthesis and Characterization of Nanocellulose-Gelatin Films

A nanocellulose-gelatin (bacterial cellulose gelatin (BCG)) film was developed by a supplement of gelatin, at a concentration of 1%–10% w/v, in a coconut-water medium under the static cultivation of Acetobacter xylinum. The two polymers exhibited a certain degree of miscibility. The BCG film displayed dense and uniform homogeneous structures. The Fourier transform infrared spectroscopy (FTIR) results demonstrated interactions between the cellulose and gelatin. Incorporation of gelatin into a cellulose nanofiber network resulted in significantly improved optical transparency and water absorption capacity of the films. A significant drop in the mechanical strengths and a decrease in the porosity of the film were observed when the supplement of gelatin was more than 3% (w/v). The BCG films showed no cytotoxicity against Vero cells

Chitinase-Assisted Bioconversion of Chitinous Waste for Development of Value-Added Chito-Oligosaccharides Products

Chito-oligosaccharides (COSs) are the partially hydrolyzed products of chitin, which is abundant in the shells of crustaceans, the cuticles of insects, and the cell walls of fungi. These oligosaccharides have received immense interest in the last few decades due to their highly promising bioactivities, such as their anti-microbial, anti-tumor, and anti-inflammatory properties. Regarding environmental concerns, COSs are obtained by enzymatic hydrolysis by chitinase under milder conditions compared to the typical chemical degradation. This review provides updated information about research on new chitinase derived from various sources, including bacteria, fungi, plants, and animals, employed for the efficient production of COSs. The route to industrialization of these chitinases and COS products is also described

Recent Progress in Processing Cellulose Using Ionic Liquids as Solvents

Cellulose-based materials have attracted great attention due to the demand for eco-friendly materials and renewable energy alternatives. An increase in the use of these materials is expected in the coming years due to progressive decline in the supply of petrochemicals. Based on the limitations of cellulose in terms of dissolution/processing, and focused on green chemistry, new cellulose production techniques are emerging, such as dissolution and functionalization in ionic liquids which are known as green solvents. This review summarizes the recent ionic liquids used in processing cellulose, including pretreatment, hydrolysis, functionalization, and conversion into bio-based platform chemicals. The recent literatures investigating the progress that ILs have made in their transition from academia to commercial application of cellulosic biomass are also reviewed

Size Distribution and Characteristics of Chitin Microgels Prepared via Emulsified Reverse-Micelles

Chitin was extracted from local snow crab shell waste and used as a raw material in the fabrication of porous spherical microgels. The chitin microgels were obtained using a batch process of emulsification and, afterward, gelation. The effects of chitin concentrations, oil and water phase ratios (O:W), surfactants, and gelation on the size distribution and morphology of the microgels were investigated. The extracted chitin possessed α-chitin with a degree of acetylation of ~60% and crystallinity of 70%, as confirmed by Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Powder Diffraction (XRD). In the reverse-micellar emulsification, different chitin concentrations in NaOH solution were used as aqueous phases, and n-hexane media containing Span 80-based surfactants were used as dispersion phases. Various HCl solutions were used as gelling agents. Microgels with sizes ranging from ~5–200 μm were obtained relying on these studied parameters. Under the condition of 3% w/w chitin solution using O:W of 15:1 at 5% w/w of Span 80 (hydrophilic-lipophilic balance; HLB of 4.3), the gelation in the emulsified reverse micelles was better controlled and capable of forming spherical microgel particles with a size of 7.1 ± 0.3 μm, when 800 μL of 1 M HCl was added. The prepared chitin microgel exhibited macro-pore morphology and swelling behavior sensitive to the acidic pH

Multifunctional Cellulosic Natural Rubber and Silver Nanoparticle Films with Superior Chemical Resistance and Antibacterial Properties

Composite films of natural rubber/cellulose fiber/silver nanoparticle were synthesized in a green route via the latex solution process. Hybrid cellulose filler containing carboxymethyl cellulose and cellulose microfibers was used to facilitate facile and fast preparation and to improve mechanical strength to the composites, respectively. All the composites possessed a high tensile strength of ~120 MPa, a high heat resistance of nearly 300 °C, and more than 20% biodegradability in soil in two weeks. Chemical resistance and antibacterial activity of the composite was enhanced depending on sizes and concentrations of silver nanoparticles (AgNPs). The composites containing 0.033–0.1% w/w AgNPs retarded toluene uptake to less than 12% throughout 8 h, whereas the composite containing 0.067–0.1% w/w AgNPs exhibited excellent antibacterial activities against Escherichia coli and Staphylococcus aureus. In comparison, 50 nm-AgNPs presented higher antibacterial activities than 100 nm-AgNPs. In vitro cytotoxicity test assessed after incubation for 24 h and 48 h revealed that almost all AgNPs-composite films exhibited non/weak and moderate cytotoxicity, respectively, to HaCaT keratinocyte cells

Alginate as Dispersing Agent for Compounding Natural Rubber with High Loading Microfibrillated Cellulose

Natural rubber (NR) reinforced with high loading of microfibrillated cellulose (MFC) was fabricated in the presence of sodium alginate as a thickening and dispersing agent in NR latex. The tensile strength and Young’s moduli of the 50% wt. MFC loading-NR composites were 13.6 and 1085.7 MPa, which were about 11.3- and 329-times enhanced compared with those of the neat NR film. The maximum elongation at 313.3% was obtained from 30% MFC loading, which was a 3.3-fold increase of that of the NR film. The thermal stability of MFC–NR films was slightly reduced, while the glass transition temperature remained unchanged at −64 °C. The MFC–NR films exhibited high water adsorption ability, toluene resistance, and biodegradability

Characteristics of Curcumin-Loaded Bacterial Cellulose Films and Anticancer Properties against Malignant Melanoma Skin Cancer Cells

Curcumin-loaded bacterial cellulose films were developed in this study. Curcumin was absorbed into never-dried bacterial cellulose pellicles by 24-h immersion in solutions of curcumin in the range of 0.2–1.0 mg /mL. The curcumin-loaded bacterial cellulose pellicles were then air-dried and characterized. The mechanical properties of curcumin-loaded bacterial cellulose films, particularly the stretching properties, appeared to be lower than those of bacterial cellulose film. This was especially evident when the loading concentration of curcumin was higher than 0.4 mg/mL. Fourier-transform infrared spectroscopy analysis indicated an interaction between bacterial cellulose microfibrils and curcumin. Controlled release of curcumin was achieved in buffer solutions containing Tween 80 and methanol additives, at pH 5.5 and 7.4. Curcumin-loaded bacterial cellulose films prepared with curcumin solutions at concentrations of 0.5 and 1.0 mg/mL displayed antifungal activities against Aspergillus niger. They also exhibited anticancer activity against A375 malignant melanoma cells. No significant cytotoxic effect was observed against normal dermal cells, specifically, human keratinocytes and human dermal fibroblasts