22,586 research outputs found
Crescent Singularities in Crumpled Sheets
We examine the crescent singularity of a developable cone in a setting
similar to that studied by Cerda et al [Nature 401, 46 (1999)]. Stretching is
localized in a core region near the pushing tip and bending dominates the outer
region. Two types of stresses in the outer region are identified and shown to
scale differently with the distance to the tip. Energies of the d-cone are
estimated and the conditions for the scaling of core region size R_c are
discussed. Tests of the pushing force equation and direct geometrical
measurements provide numerical evidence that core size scales as R_c ~ h^{1/3}
R^{2/3}, where h is the thickness of sheet and R is the supporting container
radius, in agreement with the proposition of Cerda et al. We give arguments
that this observed scaling law should not represent the asymptotic behavior.
Other properties are also studied and tested numerically, consistent with our
analysis.Comment: 13 pages with 8 figures, revtex. To appear in PR
On-demand single-photon state generation via nonlinear absorption
We propose a method for producing on-demand single-photon states based on
collision-induced exchanges of photons and unbalanced linear absorption between
two single-mode light fields. These two effects result in an effective
nonlinear absorption of photons in one of the modes, which can lead to single
photon states. A quantum nonlinear attenuator based on such a mechanism can
absorb photons in a normal input light pulse and terminate the absorption at a
single-photon state. Because the output light pulses containing single photons
preserve the properties of the input pulses, we expect this method to be a
means for building a highly controllable single photon source.Comment: 5 pages, 2 figures, to appear in PRA. To be published in PR
Field-induced structure transformation in electrorheological solids
We have computed the local electric field in a body-centered tetragonal (BCT)
lattice of point dipoles via the Ewald-Kornfeld formulation, in an attempt to
examine the effects of a structure transformation on the local field strength.
For the ground state of an electrorheological solid of hard spheres, we
identified a novel structure transformation from the BCT to the face-centered
cubic (FCC) lattices by changing the uniaxial lattice constant c under the hard
sphere constraint. In contrast to the previous results, the local field
exhibits a non-monotonic transition from BCT to FCC. As c increases from the
BCT ground state, the local field initially decreases rapidly towards the
isotropic value at the body-centered cubic lattice, decreases further, reaching
a minimum value and increases, passing through the isotropic value again at an
intermediate lattice, reaches a maximum value and finally decreases to the FCC
value. An experimental realization of the structure transformation is
suggested. Moreover, the change in the local field can lead to a generalized
Clausius-Mossotti equation for the BCT lattices.Comment: Submitted to Phys. Rev.
Spontaneous curvature cancellation in forced thin sheets
In this paper we report numerically observed spontaneous vanishing of mean
curvature on a developable cone made by pushing a thin elastic sheet into a
circular container. We show that this feature is independent of thickness of
the sheet, the supporting radius and the amount of deflection. Several variants
of developable cone are studied to examine the necessary conditions that lead
to the vanishing of mean curvature. It is found that the presence of
appropriate amount of radial stress is necessary. The developable cone geometry
somehow produces the right amount of radial stress to induce just enough radial
curvature to cancel the conical azimuthal curvature. In addition, the circular
symmetry of supporting container edge plays an important role. With an
elliptical supporting edge, the radial curvature overcompensates the azimuthal
curvature near the minor axis and undercompensates near the major axis. Our
numerical finding is verified by a crude experiment using a reflective plastic
sheet. We expect this finding to have broad importance in describing the
general geometrical properties of forced crumpling of thin sheets.Comment: 13 pages, 12 figures, revtex
Ground state of a polydisperse electrorheological solid: Beyond the dipole approximation
The ground state of an electrorheological (ER) fluid has been studied based
on our recently proposed dipole-induced dipole (DID) model. We obtained an
analytic expression of the interaction between chains of particles which are of
the same or different dielectric constants. The effects of dielectric constants
on the structure formation in monodisperse and polydisperse electrorheological
fluids are studied in a wide range of dielectric contrasts between the
particles and the base fluid. Our results showed that the established
body-centered tetragonal ground state in monodisperse ER fluids may become
unstable due to a polydispersity in the particle dielectric constants. While
our results agree with that of the fully multipole theory, the DID model is
much simpler, which offers a basis for computer simulations in polydisperse ER
fluids.Comment: Accepted for publications by Phys. Rev.
Modelling and control of the flame temperature distribution using probability density function shaping
This paper presents three control algorithms for the output probability density function (PDF) control of the 2D and 3D flame distribution systems. For the 2D flame distribution systems, control methods for both static and dynamic flame systems are presented, where at first the temperature distribution of the gas jet flames along the cross-section is approximated. Then the flame energy distribution (FED) is obtained as the output to be controlled by using a B-spline expansion technique. The general static output PDF control algorithm is used in the 2D static flame system, where the dynamic system consists of a static temperature model of gas jet flames and a second-order actuator. This leads to a second-order closed-loop system, where a singular state space model is used to describe the dynamics with the weights of the B-spline functions as the state variables. Finally, a predictive control algorithm is designed for such an output PDF system. For the 3D flame distribution systems, all the temperature values of the flames are firstly mapped into one temperature plane, and the shape of the temperature distribution on this plane can then be controlled by the 3D flame control method proposed in this paper. Three cases are studied for the proposed control methods and desired simulation results have been obtained
Charge-ordering, commensurability and metallicity in the phase diagram of layered Na(x)CoO(2)
The phase diagram of non-hydrated Na(x)CoO(2) has been determined by changing
the Na content x using a series of chemical reactions. As x increases from 0.3,
the ground state goes from a paramagnetic metal to a charge-ordered insulator
(at x=1/2) to a `Curie-Weiss metal' (around 0.70), and finally to a weak-moment
magnetically ordered state (x>0.75). The unusual properties of the state at 1/2
(including particle-hole symmetry at low T and enhanced thermal conductivity)
are described. The strong coupling between the Na ions and the holes is
emphasized.Comment: 4 pages with 3 figures, changed conten
- …