Video-Based Stylized Rendering using Frame Difference

In this paper, we suggest video based stylized rendering using frame difference. Stylized rendering using video frame has a temporal problem that occurs a difference between the previous and current frame. To reduce the temporal problem, we generate reference maps using temporal frame difference in correction and rendering steps. A correction method using reference maps can be reduced flickering effect caused by frame difference between the previous and current frame. We use a background map, an average map, and a quadtree-based summed area table as reference maps. Among these reference maps, the method using quadtree based summed area table can completely remove a flickering and popping effect. Also, a post-blurring method using bilateral filtering can be represented smooth, stylized rendering by removing unnecessary noise. Suggested stylized rendering system can be used in various fields such as visual art, advertisement, game and movie for stylized image contents generation

The reliability of an easy measuring method for abutment convergence angle with a computer-aided design (CAD) system

PURPOSE. The purpose of this study was to evaluate the intra-rater reliability and inter-rater reliability of three different methods using a drawing protractor, a digital protractor after tracing, and a CAD system. MATERIALS AND METHODS. Twenty-four artificial abutments that had been prepared by dental students were used in this study. Three dental students measured the convergence angles by each method three times. Bland-Altman plots were applied to examine the overall reliability by comparing the traditional tracing method with a new method using the CAD system. Intraclass Correlation Coefficients (ICC) evaluated intra-rater reliability and inter-rater reliability. RESULTS. All three methods exhibited high intra-rater and inter-rater reliability (ICC>0.80, P<.05). Measurements with the CAD system showed the highest intra-rater reliability. In addition, it showed improved inter-rater reliability compared with the traditional tracing methods. CONCLUSION. Based on the results of this study, the CAD system may be an easy and reliable tool for measuring the abutment convergence angle.OAIID:oai:osos.snu.ac.kr:snu2014-01/102/2008003883/3SEQ:3PERF_CD:SNU2014-01EVAL_ITEM_CD:102USER_ID:2008003883ADJUST_YN:NEMP_ID:A078517DEPT_CD:861CITE_RATE:0FILENAME:j adv prosthodont 201406 6(3) 185-93.pdfDEPT_NM:치의학과SCOPUS_YN:NCONFIRM:

Comparative fracture strength analysis of Lava and Digident CAD/CAM zirconia ceramic crowns

PURPOSE: All-ceramic crowns are subject to fracture during function. To minimize this common clinical complication, zirconium oxide has been used as the framework for all-ceramic crowns. The aim of this study was to compare the fracture strengths of two computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia crown systems: Lava and Digident.MATERIALS AND METHODS: Twenty Lava CAD/CAM zirconia crowns and twenty Digident CAD/CAM zirconia crowns were fabricated. A metal die was also duplicated from the original prepared tooth for fracture testing. A universal testing machine was used to determine the fracture strength of the crowns.RESULTS: THE MEAN FRACTURE STRENGTHS WERE AS FOLLOWS: 54.9 ± 15.6 N for the Lava CAD/CAM zirconia crowns and 87.0 ± 16.0 N for the Digident CAD/CAM zirconia crowns. The difference between the mean fracture strengths of the Lava and Digident crowns was statistically significant (P<.001). Lava CAD/CAM zirconia crowns showed a complete fracture of both the veneering porcelain and the core whereas the Digident CAD/CAM zirconia crowns showed fracture only of the veneering porcelain.CONCLUSION: The fracture strengths of CAD/CAM zirconia crowns differ depending on the compatibility of the core material and the veneering porcelain.OAIID:oai:osos.snu.ac.kr:snu2013-01/102/2008003883/8SEQ:8PERF_CD:SNU2013-01EVAL_ITEM_CD:102USER_ID:2008003883ADJUST_YN:NEMP_ID:A078517DEPT_CD:861FILENAME:j adv prosthodont 201305 5(2) 92-7.pdfDEPT_NM:치의학과EMAIL:[email protected]_YN:NCONFIRM:

Marginal fit of anterior 3-unit fixed partial zirconia restorations using different CAD/CAM systems

PURPOSE : Few studies have investigated the marginal accuracy of 3-unit zirconia fixed partial dentures (FPDs) fabricated by computer-aided design/computer-aided manufacturing (CAD/CAM) system. The purpose of this study was to compare the marginal fit of zirconia FPDs made using two CAD/CAM systems with that of metalceramic FPDs. MATERIALS AND METHODS : Artificial resin maxillary central and lateral incisors were prepared for 3-unit FPDs and fixed in yellow stone. This model was duplicated to epoxy resin die. On the resin die, 15 three-unit FPDs were fabricated per group (45 in total): Group A, zirconia 3-unit FPDs made with the Everest system; Group B, zirconia 3-unit FPDs made with the Lava system; and Group C, metal-ceramic 3-unit FPDs.They were cemented to resin dies with resin cement. After removal of pontic, each retainer was separated and observed under a microscope (Presize 440C). Marginal gaps of experimental groups were analyzed using oneway ANOVA and Duncan test. RESULTS : Mean marginal gaps of 3-unit FPDs were 60.46 μm for the Everest group, 78.71 μm for the Lava group, and 81.32 μm for the metal-ceramic group. The Everest group demonstrated significantly smaller marginal gap than the Lava and the metal-ceramic groups (P.05). CONCLUSION : The marginal gaps of anterior 3-unit zirconia FPD differed according to CAD/CAM systems, but still fell within clinically acceptable ranges compared with conventional metal-ceramic restoration.OAIID:oai:osos.snu.ac.kr:snu2013-01/102/2008003883/10SEQ:10PERF_CD:SNU2013-01EVAL_ITEM_CD:102USER_ID:2008003883ADJUST_YN:NEMP_ID:A078517DEPT_CD:861CITE_RATE:0FILENAME:첨부된 내역이 없습니다.DEPT_NM:치의학과EMAIL:[email protected]_YN:NCONFIRM:

Co-Crystal Structures of PKG Iβ (92–227) with cGMP and cAMP Reveal the Molecular Details of Cyclic-Nucleotide Binding

Cyclic GMP-dependent protein kinases (PKGs) are central mediators of the NO-cGMP signaling pathway and phosphorylate downstream substrates that are crucial for regulating smooth muscle tone, platelet activation, nociception and memory formation. As one of the main receptors for cGMP, PKGs mediate most of the effects of cGMP elevating drugs, such as nitric oxide-releasing agents and phosphodiesterase inhibitors which are used for the treatment of angina pectoris and erectile dysfunction, respectively. configuration, with a conserved threonine residue anchoring both cyclic phosphate and guanine moieties. The structure of CNBD-A in the absence of bound cyclic nucleotide was similar to that of the cyclic nucleotide bound structures. Surprisingly, isothermal titration calorimetry experiments demonstrated that CNBD-A binds both cGMP and cAMP with a relatively high affinity, showing an approximately two-fold preference for cGMP. conformation through its interaction with Thr193 and an unusual cis-peptide forming residues Leu172 and Cys173. Although these studies provide the first structural insights into cyclic nucleotide binding to PKG, our ITC results show only a two-fold preference for cGMP, indicating that other domains are required for the previously reported cyclic nucleotide selectivity

Immobilization of Mn-doped ZnS quantum dots on surface functionalized multi-walled carbon nanotubes: studies on their optical properties

Manganese-doped ZnS nanocrystals with an amine capping layer have been synthesized and used to decorate MWNTs. FT-IR spectroscopy was employed to characterize the initial changes in surface functionalities. The MWNTs were then acylated with thionyl chloride, and further, the amine capped Mn-doped ZnS semiconductor nanocrystal quantum dots (QDs) were covalently immobilized on the acylated MWNTs. The resulting Mn-doped ZnS QDs and the hybrids with carbon nanotubes were characterized by UV-Vis spectrometer, phosphorescence measurements, and XRD. High resolution TEM and EDX studies were performed to confirm the immobilization of QDs onto the nanotubes

Four Flaps Technique for Neoumbilicoplasty

The absence or disfigurement of the umbilicus is both cosmetically and psychologically distressing to patients. The goal of aesthetically pleasing umbilical reconstruction is to create a neoumbilicus with sufficient depth and good morphology, with natural-looking superior hooding and minimal scarring. Although many reports have presented techniques for creating new and attractive umbilici, we developed a technique that we term the "four flaps technique" for creating a neoumbilicus in circumstances such as the congenital absence of the umbilicus or the lack of remaining umbilical tissue following the excision of a hypertrophic or scarred umbilicus. This method uses the neighboring tissue by simply elevating four flaps and can yield sufficient depth and an aesthetically pleasing shape with appropriate superior hooding