316 research outputs found

    Fixed-time artificial insemination in beef cattle

    Get PDF
    which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Background: The study was designed to test the effect of fixed-time artificial insemination (fixed-AI) after the slightly modified Ovsynch protocol on the pregnancy rate in beef cattle in Finnish field conditions. The modification was aimed to optimize the number of offsprings per AI dose. Methods: Ninety Charolais cows and heifers were entered into the program an average of 1.8 times. Thus, 164 animal cases were included. Animals were administered 10-12 Όg of buserelin. Seven days later animals without a corpus luteum (CL) were rejected (20.7%) while the remaining 130 cases with a CL were administered prostaglandin F2α, followed 48 h later with a second injection of buserelin (8-10 Όg). Fixed-AI was performed 16-20 hours after the last injection. Results: The pregnancy rate was 51.5 % (67/130). The pregnancy rate after a short interval (50-70 d) from calving to entering the program was significantly higher than that after a long interval (>70 d). Conclusion: This protocol seems to give acceptable pregnancy results in beef herds and its effect on saving labour is notable

    Tracking family medicine graduates. Where do they go, what services do they provide and whom do they see?

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>There are continued concerns over an adequate supply of family physicians (FPs) practicing in Canada. While most resource planning has focused on intake into postgraduate education, less information is available on what postgraduate medical training yields. We therefore undertook a study of Family Medicine (FM) graduates from the University of Toronto (U of T) to determine the type of information for physician resource planning that may come from tracking FM graduates using health administrative data. This study compared three cohorts of FM graduates over a 10 year period of time and it also compared FM graduates to all Ontario practicing FPs in 2005/06. The objectives for tracking the three cohorts of FM graduates were to: 1) describe where FM graduates practice in the province 2) examine the impact of a policy introduced to influence the distribution of new FM graduates in the province 3) describe the services provided by FM graduates and 4) compare workload measures. The objectives for the comparison of FM graduates to all practicing FPs in 2005/06 were to: 1) describe the patient population served by FM graduates, 2) compare workload of FM graduates to all practicing FPs.</p> <p>Methods</p> <p>The study cohort consisted of all U of T FM postgraduate trainees who started and completed their training between 1993 and 2003. This study was a descriptive record linkage study whereby postgraduate information for FM graduates was linked to provincial health administrative data. Comprehensiveness of care indicators and workload measures based on administrative data where determined for the study cohort.</p> <p>Results</p> <p>From 1993 to 2003 there were 857 University of Toronto FM graduates. While the majority of U of T FM graduates practice in Toronto or the surrounding Greater Toronto Area, there are FM graduates from U of T practicing in every region in Ontario, Canada. The proportion of FM graduates undertaking further emergency training had doubled from 3.6% to 7.8%. From 1993 to 2003, a higher proportion of the most recent FM graduates did hospital visits, emergency room care and a lower proportion undertook home visits. Male FM graduates appear to have had higher workloads compared with female FM graduates, though the difference between them was decreasing over time. A 1997 policy initiative to discount fees paid to new FPs practicing in areas deemed over supplied did result in a decrease in the proportion of FM graduates practicing in metropolitan areas.</p> <p>Conclusions</p> <p>We were able to profile the practices of FM graduates using existing and routinely collected population-based health administrative data. Further work tracking FM graduates could be helpful for physician resource forecasting and in examining the impact of policies on family medicine practice.</p

    Exploring the success factors of hybrid micro-enterprises

    Get PDF
    This research explores hybrid micro-entrepreneurs’ founding motivations and the transformation of those motivations into visions of success, by applying multiple criteria decision analysis (MCDA). We find that entrepreneurs of hybrid micro-enterprises are driven mostly by noneconomic goals and that those influence their vision of success. The success framework consists of seven indicators (training, professional development, marketing, management, external factors, infrastructures, and organizational aspects). Human capital is perceived as the most important for success – translating the professional motivations for founding. Reversely, external factors, which are usually considered crucial to attain legitimacy, are perceived the least important factors. Given the findings, are hybrid micro-entrepreneurs ready to succeed?info:eu-repo/semantics/publishedVersio

    Use of Confocal Laser as Light Source Reveals Stomata-Autonomous Function

    Get PDF
    In most terrestrial plants, stomata open during the day to maximize the update of CO(2) for photosynthesis, but they close at night to minimize water loss. Blue light, among several environmental factors, controls this process. Stomata response to diverse stimuli seems to be dictated by the behaviour of neighbour stomata creating leaf areas of coordinated response. Here individual stomata of Arabidopsis leaves were illuminated with a short blue-light pulse by focusing a confocal argon laser. Beautifully, the illuminated stomata open their pores, whereas their dark-adapted neighbours unexpectedly experience no change. This induction of individual stomata opening by low fluence rates of blue light was disrupted in the phototropin1 phototropin2 (phot1 phot2) double mutant, which exhibits insensitivity of stomatal movements in blue-illuminated epidermal strips. The irradiation of all epidermal cells making direct contact with a given stoma in both wild type and phot1 phot2 plants does not trigger its movement. These results unravel the stoma autonomous function in the blue light response and illuminate the implication of PHOT1 and/or PHOT2 in such response. The micro spatial heterogeneity that solar blue light suffers in partially shaded leaves under natural conditions highlights the physiological significance of the autonomous stomatal behaviour

    Stable amorphous georgeite as a precursor to a high-activity catalyst .

    Get PDF
    Copper and zinc form an important group of hydroxycarbonate minerals that include zincian malachite, aurichalcite, rosasite and the exceptionally rare and unstable—and hence little known and largely ignored1—georgeite. The first three of these minerals are widely used as catalyst precursors2, 3, 4 for the industrially important methanol-synthesis and low-temperature water–gas shift (LTS) reactions5, 6, 7, with the choice of precursor phase strongly influencing the activity of the final catalyst. The preferred phase2, 3, 8, 9, 10 is usually zincian malachite. This is prepared by a co-precipitation method that involves the transient formation of georgeite11; with few exceptions12 it uses sodium carbonate as the carbonate source, but this also introduces sodium ions—a potential catalyst poison. Here we show that supercritical antisolvent (SAS) precipitation using carbon dioxide (refs 13, 14), a process that exploits the high diffusion rates and solvation power of supercritical carbon dioxide to rapidly expand and supersaturate solutions, can be used to prepare copper/zinc hydroxycarbonate precursors with low sodium content. These include stable georgeite, which we find to be a precursor to highly active methanol-synthesis and superior LTS catalysts. Our findings highlight the value of advanced synthesis methods in accessing unusual mineral phases, and show that there is room for exploring improvements to established industrial catalysts

    Disambiguating ventral striatum fMRI-related bold signal during reward prediction in schizophrenia

    Get PDF
    Reward detection, surprise detection and prediction-error signaling have all been proposed as roles for the ventral striatum (vStr). Previous neuroimaging studies of striatal function in schizophrenia have found attenuated neural responses to reward-related prediction errors; however, as prediction errors represent a discrepancy in mesolimbic neural activity between expected and actual events, it is critical to examine responses to both expected and unexpected rewards (URs) in conjunction with expected and UR omissions in order to clarify the nature of ventral striatal dysfunction in schizophrenia. In the present study, healthy adults and people with schizophrenia were tested with a reward-related prediction-error task during functional magnetic resonance imaging to determine whether schizophrenia is associated with altered neural responses in the vStr to rewards, surprise prediction errors or all three factors. In healthy adults, we found neural responses in the vStr were correlated more specifically with prediction errors than to surprising events or reward stimuli alone. People with schizophrenia did not display the normal differential activation between expected and URs, which was partially due to exaggerated ventral striatal responses to expected rewards (right vStr) but also included blunted responses to unexpected outcomes (left vStr). This finding shows that neural responses, which typically are elicited by surprise, can also occur to well-predicted events in schizophrenia and identifies aberrant activity in the vStr as a key node of dysfunction in the neural circuitry used to differentiate expected and unexpected feedback in schizophrenia

    Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

    Get PDF
    The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≄20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≀pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≀{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

    Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

    Get PDF
    The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

    Mechanical properties of cotton fabric reinforced geopolymer composites at 200-1000 °C

    Get PDF
    Geopolymer composites containing woven cotton fabric (0–8.3 wt%) were fabricated using the hand lay-up technique, and were exposed to elevated temperatures of 200 °C, 400 °C, 600 °C, 800 °C and 1000 °C. With an increase in temperature, the geopolymer composites exhibited a reduction in compressive strength, flexural strength and fracture toughness. When heated above 600 °C, the composites exhibited a significant reduction in mechanical properties. They also exhibited brittle behavior due to severe degradation of cotton fibres and the creation of additional porosity in the composites. Microstructural images verified the existence of voids and small channels in the composites due to fibre degradation
    • 

    corecore