Durability of biodegradable polymers for the conservation of cultural heritage

The use of polymers for conservation of cultural heritage is related to the possibility to slow down or stop natural deterioration which, in many cases, corresponds to stopping the entrance of liquid water and to favor spontaneous water vapor removal. Unfortunately, hydrophobicity is generally favored by surface roughness and thus competitive with transparency. It is therefore important to find an optimal balance hydrophobicity, transparency and durability (especially to photooxidation). However, polymers typically used for applications in this field come from non-renewable resources and are not biodegradable. In this work, the mechanical, structural, and optical properties of PLA, PBAT, and a PBAT/PLA blends, as well as surface properties and water vapor permeability, were investigated before and after exposure to UV irradiation, in order to evaluate their durability and suitability for conservation of cultural heritage

Influence of a biodegradable contaminant on the mechanical recycling of a low-density polyethylene sample

Mechanical recycling of oil-derived polymers is certainly our best option to reduce pollution, save raw materials, and protect ourselves and the environment from the adverse effects of waste disposal. However, the presence of contaminants, including other types of plastics, that are mixed in during the recycling collection process or during the mechanical waste sorting stage could adversely affect the quality of the recycled product, leading to the recycling of a poor-quality secondary material. In this work, the influence of a biodegradable contaminant on the mechanical recycling of a low-density polyethylene (LDPE) sample was investigated by rheological (shear and non-isothermal elongation) and mechanical analyses. The results showed that 2% of the contaminant is able to influence the rheological, shear, and isothermal elongation properties of recycled LDPE, while the results of the mechanical tests showed that after one extrusion cycle, the main tensile properties were not significantly affected by the presence of the contaminant, but after only two cycles of extrusions, some significant reduction in the final properties began to appear. In short, the presence of 2% of a biodegradable co-polyester in a LDPE matrix gives rise to a more pronounced decay of the rheological and mechanical properties, but, after two extrusion steps, both rheological and mechanical properties seem still useful for the production of film

Investigation on the properties and on the photo-oxidation behaviour of polypropylene/fumed silica nanocomposites

This work investigates the effects of very small amounts of fumed silica on the morphology and on the rheological and mechanical behaviour of polypropylene nanocomposites and on their photo-oxidation behaviour. Polypropylene nanocomposites were prepared using a twin-screw corotating extruder with 0, 1 and 2 wt/wt% of SiO2. Morphological, mechanical, thermomechanical and rheological properties were examined. It was found that the viscosity of the matrix is reduced by the presence of the silica nanoparticles, suggesting a poor adhesion between the two phases and probably some lubricating effect. On the contrary, the mechanical and, in particular, the thermomechanical properties of the matrix are considerably improved by the presence of the silica. In particular, elastic modulus and tensile strength increases remarkably, and this effect becomes more and more remarkable with an increasing temperature. As for the photo-oxidation behaviour, the presence of silica improves the photostability of the polypropylene matrix. This effect has been attributed to both the barrier to the oxygen and to the absorbance of the UV radiation from the silica nanoparticles. Finally, no significant effect of the silica nanoparticles has been put in evidence on the crystallisation behaviour of the polypropylene. As for the effect of the silica content, the difference in the properties of the two nanocomposites is relatively small and all the measured properties depend much less than linearly with its amount. This has been correlated with the reaggregation of the nanoparticles that, having a larger size, decrease the contact area between the matrix and the filler

Toward the Decarbonization of Plastic: Monopolymer Blend of Virgin and Recycled Bio-Based, Biodegradable Polymer

Decarbonization of plastics is based on two main pillars: bio-based polymers and recycling. Mechanical recycling of biodegradable polymers could improve the social, economic and environmental impact of the use of these materials. In this regard, the aim of this study was to investigate whether concentrations of the same recycled biopolymer could significantly affect the rheological and mechanical properties of biodegradable monopolymer blends. Monopolymer blends are blends made of the same polymers, virgin and recycled. A sample of commercially available biodegradable blend was reprocessed in a single-screw extruder until two extrusion cycles were completed. These samples were exposed to grinding and melt reprocessed with 75% and 90% of the same virgin polymer. The blends were characterized by tensile tests and rheological tests. The results obtained showed that while multiple extrusions affected the mechanical and rheological properties of the polymer, the concentration of the reprocessed material present in the blends only very slightly affected the properties of the virgin material. In addition, the experimentally observed trends were accurately predicted by the additive model adopted