Contact angle of a hemispherical bubble: an analytical approach

We have calculated the equilibrium shape of the axially symmetric Plateau border along which a spherical bubble contacts a flat wall, by analytically integrating Laplace’s equation in the presence of gravity, in the limit of small Plateau border sizes. This method has the advantage that it provides closed-form expressions for the positions and orientations of the Plateau border surfaces. Results are in very good overall agreement with those obtained from a numerical solution procedure, and are consistent with experimental data. In particular we find that the effect of gravity on Plateau border shape is relatively small for typical bubble sizes, leading to a widening of the Plateau border for sessile bubbles and to a narrowing for pendant bubbles. The contact angle of the bubble is found to depend even more weakly on gravity

Cr(III) removal and recovery from Saccharomyces cerevisiae

Heavy metal recovery from biosorbents is of major importance in the assessment of competitiveness of biosorption processes. Several desorption agents (H2SO4, HNO3, HCl, CH3COOH and EDTA) were tested for the selection of the optimal elution conditions for Cr(III) recovery from Saccharomyces cerevisiae cells. Sorption time was optimised as it plays an important role in the sorption–desorption process, being shown that a 30 min sorption period is the best option to ensure metal removal from solution and good recovery from biosorbent. The optimal contact time with desorption agents was also studied, as long exposures to these ones may cause cell damage, affecting biosorbent metal uptake capacity in subsequent sorption cycles. Each eluant was analysed in terms of its desorption capacity and its effect on the biomass metal uptake capacity in multiple sorption–desorption cycles. Considering the effectiveness of chromium desorption from loaded biomass, it was possible to conclude that H2SO4 (pH≈1) was the most effective eluant tested, accomplishing the highest Cr(III) recovery from S. cerevisiae in three consecutive sorption/desorption cycles. Regarding the damage caused by acid treatment on S. cerevisiae cells, assessed by the reduction on metal uptake capacity after elution, it was possible to observe that sulphuric acid was the most harmful eluant causing long term negative effects in metal uptake. By the time the experiments were interrupted (nearly 26 h of continuous cycles) biomass uptake capacity was reduced to about 77% of the value reached before acid treatment.Fundação para a Ciência e a Tecnologia (FCT) – PRAXIS XXI/BD/15945/98

Sorption of Cr(III) from aqueous solutions by spent brewery grain

Two types of spent brewery grains were tested for Cr(III) uptake from aqueous solutions: not treated spent grains (NTSG), obtained by abundant washing of spent grain obtained from a Portuguese brewing industry with distilled water, and treated spent grain (TSG), prepared by treating NTSG with NaOH 0.5 M for four hours followed by washing with distilled water. Both materials were mixed with chromium solutions (50 and 100 mg Cr(III)/L), varying medium pH from 3 to 5. Maximum metal uptake occurred at pH 5. Langmuir isotherm model well describes Cr(III) biosorption by NTSG and TSG. The maximum uptake capacity obtained was 17.84 mg Cr(III)/g NTSG and 13.87 mg Cr(III)/g TSG. Considering that Langmuir constant, b, reflecting the affinity between the sorbent and the sorbate is lower for NTSG (0.0749 L/mg) it is possible to conclude that the alkalis treatment does not improve spent grain uptake capacity for Cr(III).Fundação para a Ciência e a Tecnologia (FCT) - PRAXIS XXI/BD/15945/98

Cr (III) recovery from Saccharomyces cerevisiae by elution : a preliminary study

To recover adsorbed metals from biosorbents, in order to recycle metal and reuse biomass in several adsorption/desorption cycles, elution conditions need to be optimized. The present work aimed to study the following elution parameters: eluant type and concentration (H2SO4, HNO3, HCl, CH3COOH and Na2CO3 0.1, 0.5 and 1.0 M, and EDTA 0.01, 0.05 and 0.1 M); biosorbent contact time with Cr (III) solution (15 min, 2 and 24 h), and S/L ratio (4 and 8 g/L). Experimental data show a decrease in Cr recovery efficiency with increasing sorption time, probably due to metal bioaccumulation. Concerning the S/L ratio, it was possible to observe, in most essays, that best recoveries were achieved using biosorbent concentration of 8 g/L. Comparing the eluants tested according to their metal recovery efficiencies, it can be concluded that Na2CO3 is not a good eluant (maximum recovery of 21 %). All the others showed equivalent behaviours, being necessary more assays to determine eluant treatment effect in Cr uptake capacity in subsequent sorption cycles.Fundação para a Ciência e a Tecnologia (FCT

Spikes in Cosmic Crystallography

If the universe is multiply connected and small the sky shows multiple images of cosmic objects, correlated by the covering group of the 3-manifold used to model it. These correlations were originally thought to manifest as spikes in pair separation histograms (PSH) built from suitable catalogues. Using probability theory we derive an expression for the expected pair separation histogram (EPSH) in a rather general topological-geometrical-observational setting. As a major consequence we show that the spikes of topological origin in PSH's are due to translations, whereas other isometries manifest as tiny deformations of the PSH corresponding to the simply connected case. This result holds for all Robertson-Walker spacetimes and gives rise to two basic corollaries: (i) that PSH's of Euclidean manifolds that have the same translations in their covering groups exhibit identical spike spectra of topological origin, making clear that even if the universe is flat the topological spikes alone are not sufficient for determining its topology; and (ii) that PSH's of hyperbolic 3-manifolds exhibit no spikes of topological origin. These corollaries ensure that cosmic crystallography, as originally formulated, is not a conclusive method for unveiling the shape of the universe. We also present a method that reduces the statistical fluctuations in PSH's built from simulated catalogues.Comment: 25 pages, LaTeX2e. References updated. To appear in Int. J. Mod. Phys. D (2002) in the present for

Mechanisms of Cr(III) biosorption onto residual brewer's yeast

The knowledge and understanding of metal-biomass interactions is crucial to develop and maximize biosorption processes potential to the concentration, removal and recovery of heavy metals from dilute solutions, as well as to define strategies to regenerate and reuse biosorbent in multiple cycles (Ahluwalia and Goyal, 2007; Volesky, 2001). It also turns possible biosorption optimization at a molecular level, including biomass genetic modification to induce changes in morphologic and physiologic characteristics in order to increase metal uptake (Srinath et al., 2002; Volesky, 2001). To reach that purpose, and considering that several mechanisms may contribute to the overall metal uptake depending on the metal and the biosorbent used, environmental factors, and the cell metabolic activity (Dhankhar and Hooda, 2011), it is necessary to study in detail the interactions established in each biosorption system. Heavy metal biosorption involves a combination of several passive accumulation processes, that may include: i) physical adsorption; ii) chemisorption, including ion exchange, coordination, complexation and chelation; iii) and inorganic precipitation (Ahluwalia and Goyal, 2007; Wang and Chen, 2006). According to Gadd (2004), metal-microorganism interactions may be seen as natural strategies to remove, recover or diminish metal toxicity in organic or inorganic forms. Different organisms exhibit different responses to the exposure to toxic ions, varying from transport through cellular membrane, biosorption onto cell walls, entrapment in extracellular structures, precipitation, complexation and redox reactions

Microfluidic encapsulation method to produce stable liposomes containing iohexol

Since the discovery of X-rays in the late 1890s, several medical imaging techniques have been developed, such as Computed Tomography (CT), Magnetic Resonance Imaging (MRI) and Ultrasound Imaging, which are used daily to diagnose, monitor, or treat medical conditions. Some of these techniques include the use of contrast agents to enhance the contrast images, therefore, toxic effects must be considered. Among these, Contrast-Induced Nephropathy (CIN) is an acute renal failure resulting from the administration of iodinated contrast media (CM). To date, there is no definitive treatment for CIN and several prevention approaches have been evaluated. Nanoparticles (NPs) represent a promising strategy for treatment and prevention of CIN, due to their ability to deliver CM during diagnosis imaging. In this study, iohexol-containing liposomes were produced using microfluidic technique for first time. Several phosphocholine lipids (e.g. DMPC, DOPC, DPPC and DSPC) with cholesterol (2:1 ratio) were investigated and DLS, FTIR and in vitro release studies at 37 °C were performed, with stability studies conducted on the best formulation. The microfluidic method allowed to obtain a high encapsulation efficiency (over 70%), and release profiles showed an iohexol release around or less than 0.12 mg/ml after 2 h for the majority of the formulations, which is not toxic to the kidney cells

Colour preservation of white wines using polyphenol compounds

Book of Abstracts of CEB Annual Meeting 2017info:eu-repo/semantics/publishedVersio