Scientific complications and controversies noted in the field of CdS/CdTe thin film solar cells and the way forward for further development

Cadmium telluride-based solar cell is the most successfully commercialised thin film solar cell today. The laboratory-scale small devices have achieved ~ 22%, and commercial solar panels have reached ~ 18% conversion efficiencies. However, there are various technical complications and some notable scientific contradictions that appear in the scientific literature published since the early 1970s. This review paper discusses some of these major complications and controversies in order to focus future research on issues of material growth and characterisation, post-growth processing, device architectures and interpretation of the results. Although CdTe can be grown using more than 14 different growth techniques, successful commercialisation has been taken place using close-space sublimation and electrodeposition techniques only. The experimental results presented in this review are mainly based on electrodeposition. Historical trends of research and commercial successes have also been discussed compared to the timeline of novel breakthroughs in this field. Deeper understanding of these issues may lead to further increase in conversion efficiencies of this solar cell. Some novel ideas for further development of thin film solar cells are also discussed towards the end of this paper

Large area 3D elemental mapping of a MgZnO/CdTe solar cell with correlative EBSD measurements

Chlorine is known to have numerous effects on the electronic performance of cadmium telluride (CdTe) solar cells, such as doping the CdTe absorber material and pacifying crystal defects. However the mechanisms by which the element improves device efficiency following the cadmium chloride treatment are still not fully understood. In this work the distributions of chlorine in a high efficiency CdTe device are tracked over large areas and in three dimensions by high resolution dynamic SIMS measurements. The results give new insights into the role of chlorine and defects on the performance of CdTe solar cells, particularly when combined with correlative backscatter diffraction measurements

3D distributions of chlorine and sulphur impurities in a thin-film cadmium telluride solar cell

A cadmium chloride activation treatment is essential for the production of high efficiency cadmium telluride (CdTe) solar cells. However, the effects of the treatment on the distributions of chlorine and sulphur within the device are not fully understood. Here, the detailed locations of chlorine and sulphur in a treated CdTe cell are determined in three dimensions by high resolution dynamic SIMS measurements. Chlorine is found to be present in grain boundaries, grain interiors, extended defects within the grain interiors, at the front interface, and in the cadmium sulphide layer. In each of these regions, the chlorine is likely to have significant effects on local electronic properties of the material, and hence overall device performance. Sulphur is found to have a U-shaped diffusion profile within CdTe grains, indicating a mixed grain boundary and lattice diffusion regime

Understanding the copassivation effect of Cl and Se for CdTe grain boundaries

Chlorine passivation treatment of cadmium telluride (CdTe) solar cells improves device performance by assisting electron–hole carrier separation at CdTe grain boundaries. Further improvement in device efficiency is observed after alloying the CdTe absorber layer with selenium. High-resolution secondary ion mass spectroscopy (NanoSIMS) imaging has been used to determine the distribution of selenium and chlorine at the CdTe grain boundaries in a selenium-graded CdTe device. Atomistic modeling based on density functional theory (DFT-1/2) further reveals that the presence of selenium and chlorine at an exemplar (110)/(100) CdTe grain boundary passivates critical acceptor defects and leads to n-type inversion at the grain boundary. The defect state analysis provides an explanation for the band-bending effects observed in the energy band alignment results, thereby elucidating mechanisms for high efficiencies observed in Se-alloyed and Cl-passivated CdTe solar cells

Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells

Electricity produced by cadmium telluride (CdTe) photovoltaic modules is the lowest-cost electricity in the solar industry, and now undercuts fossil fuel-based sources in many regions of the world. This is due to recent efficiency gains brought about by alloying selenium into the CdTe absorber, which has taken cell efficiency from 19.5% to its current record of 22.1%. Although the addition of selenium is known to reduce the bandgap of the absorber material, and hence increase the cell short-circuit current, this effect alone does not explain the performance improvement. Here, by means of cathodoluminescence and secondary ion mass spectrometry, we show that selenium enables higher luminescence efficiency and longer diffusion lengths in the alloyed material, indicating that selenium passivates critical defects in the bulk of the absorber layer. This passivation effect explains the record-breaking performance of selenium-alloyed CdTe devices, and provides a route for further efficiency improvement that can result in even lower costs for solar-generated electricity