6,299 research outputs found

    Reactive Strength Index Modified Is a Valid Measure of Explosiveness in Collegiate Female Volleyball Players

    Get PDF
    Kipp, K, Kiely, MT, and Geiser, CF. Reactive strength index modified is a valid measure of explosiveness in collegiate female volleyball players. J Strength Cond Res 30(5): 1341–1347, 2016—The purpose of this study was to investigate the validity of the reactive strength index modified (RSImod) as a measure of lower body explosiveness. Fifteen female, National Collegiate Athletic Association Division I volleyball players performed vertical countermovement jumps (CMJs) while standing on a force plate. Each player performed 3 CMJs. The vertical ground reaction forces collected during each jump were used to calculate jump height, time to take-off, time to peak force, peak force, peak rate of force development, and peak power; the latter 3 variables were all normalized to body mass. Reactive strength index modified was calculated as the ratio between jump height and time to take-off. All variables, except for jump height, were then entered a factor analysis, which reduced the input data into 2 factors: a force factor and a speed factor. Although RSImod loaded more strongly onto the force factor, further analysis showed that RSImod loaded positively onto both force and speed factors. Visual analysis of the Cartesian coordinates also showed that RSImod loaded into the quadrant of greater force and speed abilities. These results indicate that the construct of RSImod, as derived from CMJ force-time data, captures a combination of speed-force factors that can be interpreted as lower body explosiveness during the CMJ. Reactive strength index modified therefore seems to be a valid measure to study lower body explosiveness

    Biomechanical Determinants of the Reactive Strength Index During Drop Jumps

    Get PDF
    The Reactive Strength Index (RSI) is often used to quantify drop-jump (DJ) performance; however, not much is known about its biomechanical determinants. The purpose of this study was to investigate the correlations between the RSI and several biomechanical variables calculated from DJ performed with different initial drop heights. Twelve male NCAA Division I basketball players performed DJs from drop heights of 30, 45, and 60 cm. Force plates were used to calculate DJ performance parameters (ie, DJ height, contact time, and RSI) and DJ biomechanical variables (ie, vertical stiffness and eccentric/concentric energetics). Regression analyses were used to assess the correlations between variables at each drop height, and ANOVAs were used to assess the differences of all variables across drop heights. Follow-up analyses used 2 neural networks to determine if DJ performance and biomechanical data could accurately classify DJ trials by drop-height condition. Vertical-stiffness values were significantly correlated with RSI at each height but did not change across drop heights. Surprisingly, the RSI and other DJ parameters also did not vary across drop height, which resulted in the inability of these variables to accurately classify DJ trials. Given that vertical stiffness did not change across drop height and was highly correlated with RSI at each height, the RSI appears to reflect biomechanical behavior related to vertical stiffness during DJ. However, the inability of the RSI to accurately classify drop-height condition questions the use of RSI profiles established from DJs from different heights

    Mechanical Demands of the Hang Power Clean and Jump Shrug: A Joint-level Perspective

    Get PDF
    The purpose of this study was to investigate the joint- and load-dependent changes in the mechanical demands of the lower extremity joints during the hang power clean (HPC) and the jump shrug (JS). Fifteen male lacrosse players were recruited from an NCAA DI team, and completed three sets of the HPC and JS at 30%, 50%, and 70% of their HPC 1-Repetition Maximum (1-RM HPC) in a counterbalanced and randomized order. Motion analysis and force plate technology were used to calculate the positive work, propulsive phase duration, and peak concentric power at the hip, knee, and ankle joints. Separate three-way analysis of variances were used to determine the interaction and main effects of joint, load, and lift type on the three dependent variables. The results indicated that the mechanics during the HPC and JS exhibit joint-, load-, and lift-dependent behavior. When averaged across joints, the positive work during both lifts increased progressively with external load, but was greater during the JS at 30% and 50% of 1-RM HPC than during the HPC. The JS was also characterized by greater hip and knee work when averaged across loads. The joint-averaged propulsive phase duration was lower at 30% than at 50% and 70% of 1-RM HPC for both lifts. Furthermore, the load-averaged propulsive phase duration was greater for the hip than the knee and ankle joint. The jointaveraged peak concentric power was the greatest at 70% of 1-RM for the HPC and at 30% to 50% of 1-RM for the JS. In addition, the joint-averaged peak concentric power of the JS was greater than that of the HPC. Furthermore, the load-averaged peak knee and ankle concentric joint powers were greater during the execution of the JS than the HPC. However, the loadaveraged power of all joints differed only during the HPC, but was similar between the hip and knee joints for the JS. Collectively, these results indicate that compared to the HPC the JS is characterized by greater hip and knee positive joint work, and greater knee and ankle peak concentric joint power, especially if performed at 30 and 50% of 1-RM HPC. This study provides important novel information about the mechanical demands of two commonly used exercises and should be considered in the design of resistance training programs that aim to improve the explosiveness of the lower extremity joints

    Competition Volume and Changes in Countermovement Jump Biomechanics and Motor Signatures in Female Collegiate Volleyball Players

    Get PDF
    Kipp, K, Kiely, M, and Geiser, C. Competition volume and changes in countermovement jump biomechanics and motor signatures in female collegiate volleyball players. J Strength Cond Res 35(4): 970–975, 2021—The purpose of this study was to investigate the relationship between competition volume and preseason to postseason changes in countermovement jump (CMJ) biomechanics and motor signatures in female collegiate volleyball players. Ten National Collegiate Athletic Association Division I female volleyball players performed CMJs on force plates before (PRE) and after (POST) their season. Countermovement jump height was calculated, and 4 discrete biomechanical variables (peak body-mass normalized force [PeakF], peak body-mass normalized rate of force development [PeakRFD], movement time [TIME], and the ratio between eccentric and total movement time [EccT:TIME]) were calculated. A factor analysis of the 4 biomechanical variables was used to identify CMJ motor signatures. The total number of sets played by each player was used to define total competition volume for the season. Correlation coefficients were used to investigate the associations between competition volume and changes in CMJ height, discrete biomechanical variables, and the components of the CMJ motor signature. The statistical analysis indicated that team-average jump height did not change over the course of the season. However, competition volume was negatively associated with changes in CMJ height, such that decreases in CMJ height over the course of the season occurred in players who played large numbers of sets. Although CMJ during POST testing was characterized by longer TIME and greater PeakRFD, CMJ motor signatures did not change and suggest that the female volleyball players in this study retained their preferred jumping strategy across the season. Given that decreases in CMJ height were most pronounced in players who played the most sets, and scored the most points during the season, future research may need to focus on player- or position-specific interventions that help players retain CMJ performance in the face of the competitive demands of a collegiate volleyball season

    CHANGES IN PRINCIPAL COMPONENT STRUCTURE OF COUNTERMOVEMENT JUMPS AFTER A VOLLEYBALL SEASON

    Get PDF
    The purpose of this study was to investigate changes in the principal component structure of countermovement jumps (CMJ) in female volleyball players over the course of a competitive season. Eleven NCAA Division I female volleyball players performed CMJs on a force plate before and after a competitive season. Discrete biomechanical variables were extracted from the force-time records of all CMJs and entered into a factor analysis. The analysis yielded two factors that could account for the biomechanical structure of the CMJs: a temporal and a force factor. Although no differences in factor scores were identified between pre- and post-season testing sessions, sub-group analysis highlighted large individual changes in temporal and force factor scores

    Phylogenetic diversity of insecticolous fusaria inferred from multilocus DNA sequence data and their molecular identification via FUSARIUM-ID and Fusarium MLST

    Get PDF
    We constructed several multilocus DNA sequence datasets to assess the phylogenetic diversity of insecticolous fusaria, especially focusing on those housed at the Agricultural Research Service Collection of Entomopathogenic Fungi (ARSEF), and to aid molecular identifications of unknowns via the FUSARIUM-ID and Fusarium MLST online databases and analysis packages. Analyses of a 190-taxon, two-locus dataset, which included 159 isolates from insects, indicated that: (i) insect-associated fusaria were nested within 10 species complexes spanning the phylogenetic breadth of Fusarium, (ii) novel, putatively unnamed insecticolous species were nested within 8/10 species complexes and (iii) Latin binomials could be applied with confidence to only 18/58 phylogenetically distinct fusaria associated with pest insects. Phylogenetic analyses of an 82-taxon, three-locus dataset nearly fully resolved evolutionary relationships among the 10 clades containing insecticolous fusaria. Multilocus typing of isolates within four species complexes identified surprisingly high genetic diversity in that 63/65 of the fusaria typed represented newly discovered haplotypes. The DNA sequence data, together with corrected ABI sequence chromatograms and alignments, have been uploaded to the following websites dedicated to identifying fusaria: FUSARIUM-ID (http://isolate.fusariumdb.org) a

    Vigilant Keratinocytes Trigger PAMP Signaling in Response to Streptococcal M1 Protein.

    Get PDF
    The human skin exerts many functions in order to maintain its barrier integrity and protect the host from invading microorganisms. One such pathogen is Streptococcus pyogenes, which can cause a variety of superficial skin wounds that may eventually progress into invasive deep soft tissue infections. Here we show that keratinocytes recognize soluble M1 protein, a streptococcal virulence factor, as a PAMP to release alarming inflammatory responses. We found that this interaction initiates an inflammatory intracellular signaling cascade involving the activation of mitogen-activated kinases, ERK, p38 and JNK, and the subsequent induction and mobilization of the transcription factors NF-κB and AP-1. We also determined the imprint of inflammatory mediators released, such as IL-8, GROα, MIF, EMMPRIN, IL-1α, IL-1Ra, and ST2 in response to streptococcal M1 protein. The expression of IL-8 is dependent on TLR2 activity and subsequent activation of the MAP kinases ERK and p38. Notably this signaling seems distinct for IL-8 release and it is not shared with the other inflammatory mediators. We conclude that keratinocytes participate pro-inflammatory in streptococcal pattern recognition and that expression of the chemoattractant IL-8 by keratinocytes constitutes an important protective mechanism against streptococcal M1 protein

    Spin Liquid State in an Organic Mott Insulator with Triangular Lattice

    Get PDF
    1^{1}H NMR and static susceptibility measurements have been performed in an organic Mott insulator with nearly isotropic triangular lattice, κ\kappa-(BEDT-TTF)2_{2}Cu2_{2}(CN)3_{3}, which is a model system of frustrated quantum spins. The static susceptibility is described by the spin SS = 1/2 antiferromagnetic triangular-lattice Heisenberg model with the exchange constant JJ \sim 250 K. Regardless of the large magnetic interactions, the 1^{1}H NMR spectra show no indication of long-range magnetic ordering down to 32 mK, which is four-orders of magnitude smaller than JJ. These results suggest that a quantum spin liquid state is realized in the close proximity of the superconducting state appearing under pressure.Comment: 4 pages, 4 figure

    Magnetic and electronic properties of M-Ba-Cu-O (M: Y, Er, Eu)

    Get PDF
    Various high-Tc superconductors of the La-(Ba,Sr)-Cu-O and the M-Ba-Cu-O systems with M = Y, Er, and Eu have been prepared by the solid-state reaction method. Single-phase samples with no additional diffraction peaks as verified by x-ray diffraction (XRD) measurements have been obtained. Measurements of the electrical resistivity and of the magnetization showed sharp superconducting transitions with a width of 1 K. The measurements of the magnetic susceptibility have been extended above room temperature up to 770 K. There is clear evidence for the formation of a magnetic moment in all M-Ba-Cu-O samples. Monochromated x-ray photoelectron spectroscopy (MXPS) valence band and x-ray photoelectron spectroscopy (XPS) core level spectra have been measured on various samples at room temperature and at liquid nitrogen temperatur

    Treatment of Advanced Emphysema with Emphysematous Lung Sealant (AeriSeal (R))

    Get PDF
    Background: This report summarizes initial tests of an emphysematous lung synthetic polymer sealant (ELS) designed to reduce lung volume in patients with advanced emphysema. Objectives: The primary study objective was to define a therapeutic strategy to optimize treatment safety and effectiveness. Methods: ELS therapy was administered bronchoscopically to 25 patients with heterogeneous emphysema in an open-label, noncontrolled study at 6 centers in Germany. Treatment was performed initially at 2-4 subsegments. After 12 weeks, patients were eligible for repeat therapy to a total of 6 sites. Safety and efficacy were assessed after 6 months. Responses were evaluated in terms of changes from baseline in lung physiology, functional capacity, and health-related quality of life. Follow-up is available for 21 of 25 patients. Results: Treatment was well tolerated. There were no treatment-related deaths (i.e. within 90 days of treatment), and an acceptable short-and long-term safety profile. Physiological and clinical benefits were observed at 24 weeks. Efficacy responses were better among Global Initiative for Chronic Obstructive Lung Disease (GOLD) stage III patients {[}n = 14; change in residual volume/total lung capacity (Delta RV/TLC) = -7.4 +/- 10.3%; Delta forced expiratory volume in 1 s (Delta FEV(1)) = +15.9 +/- 22.6%; change in forced vital capacity (Delta FVC) = +24.1 +/- 22.7%; change in carbon monoxide lung diffusion capacity (Delta DLCO) = +19.3 +/- 34.8%; change in 6-min walk test (Delta 6MWD) = +28.7 +/- 59.6 m; change in Medical Research Council Dyspnea (Delta MRCD) score = -1.0 +/- 1.04 units; change in St. George's Respiratory Questionnaire (Delta SGRQ) score = -9.9 +/- 15.3 units] than for GOLD stage IV patients (n = 7; Delta RV/TLC = -0.5 +/- 6.4%; Delta FEV 1 = +2.3 +/- 12.3%; Delta FVC = +2.6 +/- 21.1%; Delta DLCO = -2.8 +/- 17.2%; Delta 6MWD = +28.3 +/- 58.4 m; Delta MRCD = 0.3 +/- 0.81 units; Delta SGRQ = -6.7 +/- 7.0 units). Conclusions: ELS therapy shows promise for treating patients with advanced heterogeneous emphysema. Additional studies to assess responses in a larger cohort with a longer follow-up are warranted. Copyright (C) 2011 S. Karger AG, Base
    corecore