Reaction Rates and Nuclear Properties Relevant for Nucleosynthesis in Massive Stars and Far From Stability

Explosive nuclear burning in astrophysical environments produces unstable nuclei which again can be targets for subsequent reactions. In addition, it involves a large number of stable nuclides which are not fully explored by experiments, yet. Thus, it is necessary to be able to predict reaction cross sections and thermonuclear rates with the aid of theoretical models. Such predictions are also of interest for investigations at radioactive ion beam facilities. An extended library of theoretical cross sections and reaction rates is presented. The problem of alpha+nucleus potentials is addressed and new parametrizations presented. The problem of properly predicting cross sections at low level densities is illustrated by the 62Ni(n,gamma) reaction.Comment: 7 pages, invited talk, to appear in proceedings of CGS11 (Prague), World Scientific (new version: fixed typo in potential parameters; note: they will still be incorrect in the printed version

Direct neutron capture cross sections of 62Ni in the s-process energy range

Direct neutron capture on 62Ni is calculated in the DWBA and the cross sections in the energy range relevant for s-process nucleosynthesis are given. It is confirmed that the thermal value of the capture cross section contains a subthreshold resonance contribution. Contrary to previous investigations it is found that the capture at higher energies is dominated by p-waves, thus leading to a considerably increased cross section at s-process energies and a modified energy dependence.Comment: 10 pages, 1 figure, corrected typos in Eq. 6 and subsequent paragrap

CASTOR: Centauro and Strange Object Research in nucleus-nucleus collisions at LHC

We describe the CASTOR detector designed to probe the very forward, baryon-rich rapidity region in nucleus-nucleus collisions at the LHC. We present a phenomenological model describing the formation of a QGP fireball in a high baryochemical potential environment, and its subsequent decay into baryons and strangelets. The model explains Centauros and the long-penetrating component and makes predictions for the LHC. Simulations of Centauro-type events were done. To study the response of the apparatus to new effects different exotic species (DCC, Centauros, strangelets etc.) were passed through the deep calorimeter. The energy deposition pattern in the calorimeter appears to be a new clear signature of the QGP.Comment: Talk given by E. Gladysz-Dziadus for the CASTOR group, Intern. Workshop on Nuclear Theory, 10-15 June, 2002, Bulgaria, Rila Mountains, 15 pages, 14 figure

Non-Statistical Effects in Neutron Capture

There have been many reports of non-statistical effects in neutron-capture measurements. However, reports of deviations of reduced-neutron-width distributions from the expected Porter-Thomas (PT) shape largely have been ignored. Most of these deviations have been reported for odd-A nuclides. Because reliable spin (J) assignments have been absent for most resonances for such nuclides, it is possible that reported deviations from PT might be due to incorrect J assignments. We recently developed a new method for measuring spins of neutron resonances by using the DANCE detector at LANSCE. Measurements made with a 147Sm sample allowed us to determine spins of almost all known resonances below 1 keV. Furthermore, analysis of these data revealed that the reduced-neutron-width distribution was in good agreement with PT for resonances below 350 eV, but in disagreement with PT for resonances between 350 and 700 eV. Our previous (n,alpha) measurements had revealed that the alpha strength function also changes abruptly at this energy. There currently is no known explanation for these two non-statistical effects. Recently, we have developed another new method for determining the spins of neutron resonances. To implement this technique required a small change (to record pulse-height information for coincidence events) to a much simpler apparatus: A pair of C6D6 gamma-ray detectors which we have employed for many years to measure neutron-capture cross sections at ORELA. Measurements with a 95Mo sample revealed that not only does the method work very well for determining spins, but it also makes possible parity assignments. Taken together, these new techniques at LANSCE and ORELA could be very useful for further elucidation of non-statistical effects.Comment: 8 pages, 3 figures, for proceedings of CGS1

Electromagnetic Calorimeter for HADES

We propose to build the Electromagnetic calorimeter for the HADES di-lepton spectrometer. It will enable to measure the data on neutral meson production from nucleus-nucleus collisions, which are essential for interpretation of dilepton data, but are unknown in the energy range of planned experiments (2-10 GeV per nucleon). The calorimeter will improve the electron-hadron separation, and will be used for detection of photons from strange resonances in elementary and HI reactions. Detailed description of the detector layout, the support structure, the electronic readout and its performance studied via Monte Carlo simulations and series of dedicated test experiments is presented. The device will cover the total area of about 8 m^2 at polar angles between 12 and 45 degrees with almost full azimuthal coverage. The photon and electron energy resolution achieved in test experiments amounts to 5-6%/sqrt(E[GeV]) which is sufficient for the eta meson reconstruction with S/B ratio of 0.4% in Ni+Ni collisions at 8 AGeV. A purity of the identified leptons after the hadron rejection, resulting from simulations based on the test measurements, is better than 80% at momenta above 500 MeV/c, where time-of-flight cannot be used.Comment: 40 pages, 38 figures version2 - the time schedule added, information about PMTs in Sec.III update

Hadron calorimeter with MAPD readout in the NA61/SHINE experiment

The modular hadron calorimeter with micro-pixel avalanche photodiodes readout for the NA61/SHINE experiment at the CERN SPS is presented. The calorimeter consists of 44 independent modules with lead-scintillator sandwich structure. The light from the scintillator tiles is captured by and transported with WLS-fibers embedded in scintillator grooves. The construction provides a longitudinal segmentation of the module in 10 sections with independent MAPD readout. MAPDs with pixel density of $~10^{4}$/mm$^2$ ensure good linearity of calorimeter response in a wide dynamical range. The performance of the calorimeter prototype in a beam test is reported

Tests of the Electromagnetic Calorimeter for HADES Experiment at GSI

Measurements of mass spectra of dilepton pairs in the HADES experiment in the energy domain of SIS18 and SIS100 (FAIR, Darmstadt, Germany) are very important for studing the excitation function of the virtual photon radiation from dense nuclear matter. A detail study of this phenomenon in the intermediate mass region (0.14 < M < 0.6 GeV/c2) demands precise measurements of inclusive cross sections o

Microfluidic Plastic Devices for Single-use Applications in High-Throughput Screening and DNA-Analysis

Microfluidic devices fabricated by mass production offer an immense potential of applications such as high-throughput drug screening, clinical diagnostics and gene analysis [1]. The low unit production costs of plastic substrates make it possible to produce single-use devices, eliminating the need for cleaning and reuse [2]. Fabrication of microfluidic devices can be applied by microtechnical fabrication processes in combination with plastic molding techniques [3]. Basically, replication in plastics requires a hot embossing or injection molding tool. Various microfabrication technologies for the masterfabrication are established, such as the LIGA technique, mechanical micromachining and the micro electrical discharge machining technique (µEDM). Depending on the specific requirements, the most suitable process can be selected. The availability of these technologies allows to generate robust metal molding tools which exhibit the inverse shapes of the intended microstructures. In close collaboration, Greiner Labortechnik and Forschungszentrum Karlsruhe have fabricated prototype single-use plastic microfluidic devices in a standard microplate format by hot embossing with a mechanical micromachined molding tool and subsequent sealing of the microchannels. The microfluidic lab-on-chip structures are compatible with existing plate and liquid handling robotics. Sub-microliter sample volumes can be applied in the 96-channel multiplexed microstructures. Additionally, the combination of small assay volumes and the possibilities of integrated capillary electrophoretic separation provide a powerful tool for rapid assay development. This presentation will show a low cost production of 96-channel plastic microfluidic devices including various microfabrication technologies to demonstrate the application of microtechnical fabrication processes for high-throughput screening and DNA analysis

Inclusive dielectron production in proton-proton collisions at 2.2 GeV beam energy

Data on inclusive dielectron production are presented for the reaction p+p at 2.2 GeV measured with the High Acceptance DiElectron Spectrometer (HADES). Our results supplement data obtained earlier in this bombarding energy regime by DLS and HADES. The comparison with the 2.09 GeV DLS data is discussed. The reconstructed e+e- distributions are confronted with simulated pair cocktails, revealing an excess yield at invariant masses around 0.5 GeV/c2. Inclusive cross sections of neutral pion and eta production are obtained

Pion emission from the T2K replica target: method, results and application

The T2K long-baseline neutrino oscillation experiment in Japan needs precise predictions of the initial neutrino flux. The highest precision can be reached based on detailed measurements of hadron emission from the same target as used by T2K exposed to a proton beam of the same kinetic energy of 30 GeV. The corresponding data were recorded in 2007-2010 by the NA61/SHINE experiment at the CERN SPS using a replica of the T2K graphite target. In this paper details of the experiment, data taking, data analysis method and results from the 2007 pilot run are presented. Furthermore, the application of the NA61/SHINE measurements to the predictions of the T2K initial neutrino flux is described and discussed.Comment: updated version as published by NIM