14 research outputs found
Weak localization in InSb thin films heavily doped with lead
The paper reports on the investigations of the weak localization (WL) effects
in 3D polycrystalline thin films of InSb. The films are closely compensated
showing the electron concentration n>10^{16} cm^{-3} at the total concentration
of the donor and acceptor type structural defects >10^{18} cm^{-3}. Unless
Pb-doped, the InSb films do not show any measurable or show very small WL
effect at 4.2 K. The Pb-doping to the concentration of the order of 10^{18}
cm^{-3} leads to pronounced WL effects below 7 K. In particular, a clearly
manifested SO scattering is observed. From the comparison of the experimental
data on temperature dependence of the magnetoresistivity and sample resistance
with the WL theory, the temperature dependence of the phase destroying time is
determined. The determination is performed by fitting theoretical terms
obtained from Kawabata's theory to experimental data on magnetoresistance. It
is concluded that the dephasing process is connected to three separate
interaction processes. The first is due to the SO scatterings and is
characterized by temperature-independent relaxation time. The second is
associated with the electron-phonon interaction. The third dephasing process is
characterized by independent on temperature relaxation time tau_c. This
relaxation time is tentatively ascribed to inelastic scattering at extended
structural defects, like grain boundaries. The resulting time dephasing time
shows saturation in its temperature dependence. The temperature dependence of
the resistance of the InSb films can be explained by the electron-electron
interaction for T2 K.Comment: 15 pages with 5 figure
ACTA PHYSICA POLONICA A No. 2 ANOMALOUS GALVANOMAGNETIC EFFECTS IN InSb THIN FILMS WITH SUPERCONDUCTING LEAD INCLUSIONS*
We report on the first experimental observations of an anomalous increase in the resistance of a semiconductor-superconductor contact in the vicinity of the critical temperature T. The effect is found in lead-doped InSb thin films having inclusions of lead of 1-3µm in diameter: The observed effect can be a model that explains similar resistance increase observed sometimes in the high 7', superconductors. PACS numbers: 72.2 0.My, 74.50.+r Sample preparation and characteristics Lead-doped InSb thin films, 2-3 μm thick, were obtained by the coevaporation of InSb and lead from separate sources on ceramic substrates. The film preparation method was essentially the same as that for tin-doped InSb films The electrical properties of the films were investigated with the Hall effect measurements. The morphology and chemical composition of the films were studied with optical microscope observations and selective etchings accompanied with chemical analysis. Further detailed studies of the morphology and chemical composition were carried out with a scanning electron microscope and X-ray microanalyse
Anomalous Galvanomagnetic Effects in InSb Thin Films with Superconducting Lead Inclusions
We report on the first experimental observations of an anomalous increase in the resistance of a semiconductor-super conductor contact in the vicinity of the critical temperature T. The effect is found in lead-doped InSb thin films having inclusions of lead of 1-3 μm in diameter: The observed effect can be a model that explains similar resistance increase observed sometimes in the high T superconductors
The elaboration of visualisation methods of the vmap l2 database in various gis environments
Nadrzędnym celem opracowania uniwersalnych metod wizualizacji danych VMap było uzyskanie czytelnej, zrozumiałej kompozycji kartograficznej, którą użytkownik mógłby odtworzyć na dowolnym fragmencie bazy danych Vmap L2 w strukturze użytkowej niezależnie od oprogramowania, jakiego używa. Zakładając, że głównym odbiorcą produktu będą firmy geodezyjne i kartograficzne, wybrano trzy najpopularniejsze programy wiodących na rynku geoinformacji producentów: ArcGIS firmy ESRI, GeoMedia firmy Intergraph i MapInfo Professional. Przyjęto szereg założeń wstępnych, które miały stanowić o uniwersalności i funkcjonalności zaproponowanych rozwiązań. Ostateczna prezentacja kartograficzna powinna spełniać warunek czytelności, jednoznaczności i wymierności zarówno na ekranie, jak i na szybkich wydrukach z systemu. Opracowane sposoby wizualizacji pozwolą na upowszechnienie i szersze wykorzystanie danych VMap L2 w środowisku programów typu GIS.The primary goal of the elaboration of universal visualisation methods of VMap data was to obtain a readable and understandable cartographic composition, which might be reproduced by the user on any fragment of the Vmap L2 database in the usable structure independently of the software used. Assuming that geodesic and cartographic companies will be the main recipients of the product, the authors chose the three most popular programmes of leading producers on the geoinformation market: ArcGIS by ESRI, GeoMedia by Intergraph and MapInfo Professional. Several preliminary assumptions were made, aiming at the universality and functionality of proposed solutions. The final cartographic presentation should fulfil the condition of readability, unequivocality and measurability both on the screen and in quick prints from the system. The drawn up methods of visualisation will enable the promotion and more extensive use of VMap L2 data in the GIS environment
Towards a system for disseminating and exchanging knowledge about georeference database
Efektywne wdrażanie infrastruktury informacji przestrzennej w Polsce, zwłaszcza zaś szerokie wykorzystanie danych przestrzennych zgromadzonych w urzędowej bazie danych referencyjnych, wymaga nie tylko ukończenia projektu BDOT, lecz także upowszechnienia wiedzy na temat struktury bazy danych topograficznych, jej aktualności, poziomu dokładności geometrycznej i możliwości jej wykorzystania w wielu dziedzinach. Zdaniem autorów, dla upowszechnienia wiedzy o bazie danych georeferencyjnych korzystne byłoby zastosowanie systemu opartego na technologii WIKI. W ramach realizowanego projektu badawczego autorzy opracowują zatem wiki-serwis internetowy. Serwis ten będzie umożliwiał nie tylko formułowanie reguł bazy wiedzy użytkownikom posiadającym status eksperta, ale przede wszystkim będzie pełnił rolę informacyjną w odniesieniu do systemu danych referencyjnych kraju. Integralną częścią tego systemu będzie baza wiedzy o rozwiązaniach zastosowanych przy tworzeniu baz TBD i BDOT, wypracowanych metodach ich wykorzystania oraz perspektyw rozwoju. Baza wiedzy zostanie opublikowana w postaci szeregu artykułów. Zastosowanie technologii WIKI pozwoli na wykorzystanie wbudowanych narzędzi do tworzenia odsyłaczy pomiędzy artykułami, co usprawni proces ich publikowania oraz wykorzystania przez użytkowników zewnętrznych. Zróżnicowanie uprawnień dostępu zapewni rzetelność informacji zamieszczanych w serwisie. Informacje te stanowić będą podstawowy kanał rozpowszechniania wiedzy, zostaną także uzupełnione o opis innych baz danych referencyjnych, historii ich tworzenia oraz definicji z nimi związanych. Opisane zostaną również aspekty technologiczne tworzenia wielorozdzielczej bazy danych referencyjnych, wraz z przykładami wizualizacji kartograficznych. Użytkownicy systemu będą mogli zapoznać się z opracowaną metodyką analiz i wizualizacji danych referencyjnych. Z drugiej strony portal będzie miejscem wymiany uwag i zadawania pytań przez użytkowników, co pozwoli na modyfikację i udoskonalenie stosowanych metod i technologii, a także prowadzenie badań nad poprawnością przekazu kartograficznego. Autorzy żywią nadzieję, iż portal ten stanie się źródłem wiedzy dla użytkowników i będzie promował nowoczesne rozwiązania geoinformacyjne wśród odbiorców na różnych stopniach edukacji.Effective implementation of the spatial information infrastructure in Poland, especially extensive use of spatial data collected in the official reference database, requires not only completing the BDOT project, but also disseminating knowledge about the topographic database’s structure, its relevance, geometrical accuracy and the possibility of using it in many areas. According to the authors, using a system based on WIKI technology would be beneficial for spreading knowledge about georeference database. A research project, still being conducted by the authors, among its many aspects involves the WIKI-website development. This website will not only provide users with expert status to formulate the rules for knowledge base, but also will act as an information system of the Poland’s official reference database. The knowledge base of solutions used for creating, using and developing BDOT and TBD databases will be an integral part of this system. It will be published as a series of articles. Using WIKI technology allows using built-in tools for creating links between articles, which will streamline the process of publishing as well as using them by external users. Access rights diversification will ensure the accuracy of information provided on the website. This information will become a key channel of knowledge dissemination and will also be supplemented by a description of other reference databases, their history and definitions associated with them. The technological aspects of creating multiresolution reference database, along with examples of cartographic visualization will be described as well. The users of the system will be able to see the developed methodology of analysis and visualization of reference data. On the other hand, the portal will hopefully become a place for exchanging comments and asking questions, which will allow experts to refine and modify the methods and technologies used in the mentioned databases development, as well as to conduct research on correctness of cartographic communication. The authors hope that the portal will become a popular information source for users and will promote innovative geo-information solutions among the users at different levels of education
SnTe Phase Transition in Strained Superlattices PbTe/SnTe
An anomaly of the in-plane conductivity is observed in the superlattices PbTe/SnTe on (001)KCl in the temperature region of 60-130 K. The anomaly is caused by a structural phase transition in SnTe layer and as a result, the transition induced formation of defects. These defects are additional scattering centres which decrease the superlattice conductivity