Electrochemical Investigation of High-Performance Dye-Sensitized Solar Cells Based on Molybdenum for Preparation of Counter Electrode

In order to improve the photocurrent conversion efficiency of dye-sensitized solar cells (DSSCs), we studied an alternative conductor for the counter electrode and focused on molybdenum (Mo) instead of conventional fluorine-doped tin oxide (FTO). Because Mo has a similar work function to FTO for band alignment, better formability of platinum (Pt), and a low electric resistance, using a counter electrode made of Mo instead of FTO lead to the enhancement of the catalytic reaction of the redox couple, reduce the interior resistance of the DSSCs, and prevent energy-barrier formation. Using electrical measurements under a 1-sun condition (100 mW/cm(2), AM 1.5), we determined that the fill factor (FF) and photocurrent conversion efficiency (eta) of DSSCs with a Mo electrode were respectively improved by 7.75% and 5.59% with respect to those of DSSCs with an FTO electrode. Moreover, we have investigated the origin of the improved performance through surface morphology analyses such as scanning electron microscopy and electrochemical analyses including cyclic voltammetry and impedance spectroscopy

Automatic Three-Dimensional Cephalometric Annotation System Using Three-Dimensional Convolutional Neural Networks

Background: Three-dimensional (3D) cephalometric analysis using computerized tomography data has been rapidly adopted for dysmorphosis and anthropometry. Several different approaches to automatic 3D annotation have been proposed to overcome the limitations of traditional cephalometry. The purpose of this study was to evaluate the accuracy of our newly-developed system using a deep learning algorithm for automatic 3D cephalometric annotation. Methods: To overcome current technical limitations, some measures were developed to directly annotate 3D human skull data. Our deep learning-based model system mainly consisted of a 3D convolutional neural network and image data resampling. Results: The discrepancies between the referenced and predicted coordinate values in three axes and in 3D distance were calculated to evaluate system accuracy. Our new model system yielded prediction errors of 3.26, 3.18, and 4.81 mm (for three axes) and 7.61 mm (for 3D). Moreover, there was no difference among the landmarks of the three groups, including the midsagittal plane, horizontal plane, and mandible (p>0.05). Conclusion: A new 3D convolutional neural network-based automatic annotation system for 3D cephalometry was developed. The strategies used to implement the system were detailed and measurement results were evaluated for accuracy. Further development of this system is planned for full clinical application of automatic 3D cephalometric annotation

Characterization for Binding Complex Formation with Site-Directly Immobilized Antibodies Enhancing Detection Capability of Cardiac Troponin I

The enhanced analytical performances of immunoassays that employed site-directly immobilized antibodies as the capture binders have been functionally characterized in terms of antigen-antibody complex formation on solid surfaces. Three antibody species specific to cardiac troponin I, immunoglobulin G (IgG), Fab, and F(ab′)2 were site-directly biotinylated within the hinge region and then immobilized via a streptavidin-biotin linkage. The new binders were more efficient capture antibodies in the immunoassays compared to randomly bound IgG, particularly, in the low antibody density range. The observed improvements could have resulted from controlled molecular orientation and also from flexibility, offering conditions suitable for binding complex formations

Development of Automatic Mold Shot Measurement and Management System for Smart Factory

Many small- and medium-sized car-part manufacturers are either still managing their mold manually or rarely managing it, and therefore, experience significant manufacturing cost and loss in time. In such a situation, a module has been developed in the present work which can count the number of mold used. Such a module is extremely important for small and medium-sized enterprises (SMEs) applying which in the production line they will be able to manage the mold life cycle and improve product quality. This is expected to have both direct and indirect effects on their business activities. The developed system uses a photo sensor, distance measurement sensor, Atmega128 MCU, tablet pc and Bluetooth communication module. The actual module developed in this study was set up on a molding equipment for test and data were collected using an existing tablet PC. The test showed that the number of shots increased when the upper mold touched the lower mold. The maximum and minimum value between the upper and lower molds could be adjusted with the automatic mold shot measurement and management system. Therefore, any molding equipment with various upper-lower gaps will be able to apply the newly developed system

Influence of Anesthesia Type on Outcomes after Endovascular Treatment in Acute Ischemic Stroke: Meta-Analysis

Purpose To assess clinical and angiographic outcomes after endovascular treatment (EVT) in ischemic stroke patients according to anesthesia types (general anesthesia vs. conscious sedation).Materials and Methods A systematic literature review through an online data base between January 1990 and September 2017 was performed. A fixed effect model was used in cases of <50% heterogeneity. The primary outcomes were good clinical outcome at the 3-month follow-up and successful recanalization. A meta-regression analysis was done to estimate primary outcomes of log odds ratio (OR) on onset-to-puncture time (OTP) differences. Publication bias was determined using Begg’s funnel plot and additional the Trim and Fill method. Results Sixteen articles including 2,662 patients (general anesthesia, n=1,275; conscious sedation, n=1,387) were included. General anesthesia significantly decreased good outcomes than conscious sedation (OR, 0.564; 95% confidence interval [CI], 0.354–0.899). However, outcomes did not differ significantly in randomized controlled trials (RCTs; OR, 1.101; 95% CI, 0.395–3.071). Anesthesia type was not associated with successful recanalization (OR, 0.985; 95% CI, 0.787–1.233). General anesthesia increased the risk of mortality (OR, 1.532; 95% CI, 1.187–1.976) and pneumonia (OR, 1.613; 95% CI, 1.172–2.221), but not symptomatic intracranial hemorrhage (OR, 1.125; 95% CI, 0.767–1.652). The meta-regression analysis showed no linear relationship between OTP differences and log OR of good outcome (coefficient, 0.0004; P=0.95) or successful recanalization (coefficient, 0.0005; P=0.94), respectively. Conclusion General anesthesia seemed to be associated with adverse clinical outcome after EVT. However, its efficacy was not demonstrated in RCTs. Successful recanalization did not differ according to anesthesia type. Studies using individual patient data based on further RCTs are necessary to elucidate anesthesia effect on procedural and clinical outcomes

Importance of remission and residual somatic symptoms in health-related quality of life among outpatients with major depressive disorder: a cross-sectional study

Background: Major depressive disorder (MDD) is strongly associated with an impaired quality of life (QoL), which is itself affected by various factors. Symptom-oriented ratings poorly reflect the impact of disease on the QoL and level of functioning of the mental health of subjects. The purpose of this study was to assess health-related QoL (HRQoL) using preference-based measures in outpatients with MDD with regard to their remission achievement and clinical factors affecting the HRQoL. Methods: This was a cross-sectional observational study. We recruited 811 patients with MDD from 14 psychiatric outpatient clinics in Korea. They were divided into three groups as follows: a new visit group (n = 287), a remitted group (n = 235), and a non-remitted group (n = 289). The 17-item Hamilton Depression Rating Scale was used to assign patients to the remitted or non-remitted group. The general HRQoL was assessed with the EuroQol 5D (EQ-5D), using both the EQ-5D index score and the EuroQol Visual Analog Scale (EQ-VAS). The disease-specific HRQoL was assessed with the Quality of Life Enjoyment and Satisfaction Questionnaire Short Form (Q-LES-Q-SF). Results: The non-remitted group showed a significant impairment of HRQoL in view of the subscales of EQ-5D index scores, EQ-VAS, and Q-LES-Q-SF. The EQ-5D index score in the remitted group was 0.77 ± 0.10, while it was 0.57 ± 0.23 in the non-remitted group and 0.58 ± 0.24 in the new visit group (p < 0.0001). The EQ-VAS scores for the remitted and non-remitted groups were 72.5 ± 16.6 and 50.9 ± 20.3, respectively (p < 0.0001). Likewise, patients with remission had the Q-LES-Q-SF total score of 46.5 ± 8.8, whereas those with non-remission reported 36.7 ± 7.7 (p < 0.0001). The symptom severity measured by the Depression and Somatic Symptoms Scale was significantly correlated with the HRQoL. Furthermore, patients with severe somatic symptoms showed a significantly lower EQ-5D index score (0.54 ± 0.24) than those with mild/moderate somatic symptoms (0.75 ± 0.12; p = 0.002). Conclusion: Non-remitted MDD patients, especially those with more severe somatic symptoms, show a distinct impairment of HRQoL and more clinical symptoms, suggesting the importance of achieving remission in the treatment of MDD