Calibration and Use of the Canberra iSolo 300G

This procedure provides instructions for the calibration and use of the Canberra iSolo Low Background Alpha/Beta Counting System (iSolo) that is used for counting air filters and swipe samples. This detector is capable of providing radioisotope identification (e.g., it can discriminate between radon daughters and plutonium). This procedure includes step-by-step instructions for: (1) Performing periodic or daily 'Background' and 'Efficiency QC' checks; (2) Setting-up the iSolo for counting swipes and air filters; (3) Counting swipes and air filters for alpha and beta activity; and (4) Annual calibration

A Monte Carlo Model for Interrogation of Thick Cargos for Clandestine Fissionable Materials; Tests with 14-MeV Neutrons

A Monte Carlo model has been developed for interrogation of fissionable material embedded in thick cargos when high-energy {beta}-delayed {gamma} rays are detected following neutron-induced fission. The model includes the principal structural components of the laboratory, the neutron source and collimator assembly in which it resides, the assembly that represents cargo of given characteristics, a target of highly-enriched uranium (HEU) and large external plastic scintillators for photon detection. The ability of this model to reproduce experimental measurements was tested by comparing simulations with measurements of the number of induced fissions and the number of detected photons when the HUE target was irradiated with 14.25-MeV neutrons in the absence of any cargo and while embedded in assemblies of plywood and iron pipes. The simulations agreed with experimental measurements within a factor of about 2 for irradiation of the bare target and when the areal density of intervening cargo was 33 g cm{sup -2} (wood) and 61 g cm{sup -2} (steel pipes). This suggests that the model can permit exploration of a large range in parameter space with reasonable fidelity

Calibration and Use of the Canberra iSolo 300G

This procedure provides instructions for the calibration and use of the Canberra iSolo Low Background Alpha/Beta Counting System (iSolo) that is used for counting air filters and swipe samples. This detector is capable of providing radioisotope identification (e.g., it can discriminate between radon daughters and plutonium). This procedure includes step-by-step instructions for: (1) Performing periodic or daily 'Background' and 'Efficiency QC' checks; (2) Setting-up the iSolo for counting swipes and air filters; (3) Counting swipes and air filters for alpha and beta activity; and (4) Annual calibration