22 research outputs found
The potential of adjusting water bolus liquid properties for economic and precise MR thermometry guided radiofrequency hyperthermia
The potential of MR thermometry (MRT) fostered the development of MRI compatible radiofrequency (RF) hyperthermia devices. Such device integration creates major technological challenges and a crucial point for image quality is the water bolus (WB). The WB is located between the patient body and external sources to both couple electromagnetic energy and to cool the patient skin. However, the WB causes MRT errors and unnecessarily large field of view. In this work, we studied making the WB MRI transparent by an optimal concentration of compounds capable of modifying T2 * relaxation without an impact on the efficiency of RF heating. Three different T2 * reducing compounds were investigated, namely CuSO4, MnCl2, and Fe3 O4. First, electromagnetic properties and T2 * relaxation rates at 1.5 T were measured. Next, through multi-physics simulations, the predicted effect on the RF-power deposition pattern was evaluated and MRT precision was experimentally assessed. Our results identified 5 mM Fe3 O4 solution as optimal since it does not alter the RF-power level needed and improved MRT precision from 0.39â—¦ C to 0.09â—¦ C. MnCl2 showed a similar MRT improvement, but caused unacceptable RF-power losses. We conclude that adding Fe3 O4 has significant potential to improve RF hyperthermia treatment monitoring under MR guidance
An MR-compatible antenna and application in a murine superficial hyperthermia applicator
In this work, a novel magnetic resonance (MR)-compatible microwave antenna was designed and validated in a small animal superficial hyperthermia applicator. The antenna operates at 2.45 GHz and matching is made robust against production and setup inaccuracies. To validate our theoretical concept, a prototype of the applicator was manufactured and tested for its properties concerning input reflection, sensitivity for setup inaccuracies, environment temperature stability and MR-compatibility. The experiments show that the applicator indeed fulfils the requirements for MR-guided hyperthermia investigation in small animals: it creates a small heating focus (<1 cm3), has a stable and reliable performance (S11< −15 dB) for all working conditions and is MR-compatible
Systematic review of pre-clinical and clinical devices for magnetic resonance-guided radiofrequency hyperthermia
Clinical trials have demonstrated the therapeutic benefits of adding radiofrequency (RF) hyperthermia (HT) as an adjuvant to radio- and chemotherapy. However, maximum utilization of these benefits is hampered by the current inability to maintain the temperature within the desired range. RF HT treatment quality is usually monitored by invasive temperature sensors, which provide limited data sampling and are prone to infection risks. Magnetic resonance (MR) temperature imaging has been developed to overcome these hurdles by allowing noninvasive 3D temperature monitoring in the target and normal tissues. To exploit this feature, several approaches for inserting the RF heating devices into the MR scanner have been proposed over the years. In this review, we summarize the status quo in MR-guided RF HT devices and analyze trends in these hybrid hardware configurations. In addition, we discuss the various approaches, extract best practices and identify gaps regarding the experimental validation procedures for MR - RF HT, aimed at converging to a common standard in this process
Standardization of patient modeling in hyperthermia simulation studies: introducing the Erasmus Virtual Patient Repository
Purpose: Thermal dose-effect relations have demonstrated that clinical effectiveness of hyperthermia would benefit from more controlled heating of the tumor. Hyperthermia treatment planning (HTP) is a potent tool to study strategies enabling target conformal heating, but its accuracy is affected by patient modeling approximations. Homogeneous phantoms models are being used that do not match the body shape of patients in treatment position and often have unrealistic target volumes. As a consequence, simulation accuracy is affected, and performance comparisons are difficult. The aim of this study is to provide the first step toward standardization of HTP simulation studies in terms of patient modeling by introducing the Erasmus Virtual Patient Repository (EVPR): a virtual patient model database.Methods: Four patients with a tumor in the head and neck or the pelvis region were selected, and corresponding models were created using a clinical segmentation procedure. Using the Erasmus University Medical Center standard procedure, HTP was applied to these models and compared to HTP for commonly used surrogate models.Results: Although this study was aimed at presenting the EVPR database, our study illustrates that there is a non-negligible difference in the predicted SAR patterns between patient models and homogeneous phantom-based surrogate models. We further demonstrate the dif
Feasibility and relevance of discrete vasculature modeling in routine hyperthermia treatment planning
Purpose: To investigate the effect of patient specific vessel cooling on head and neck hyperthermia treatment planning (HTP). Methods and materials: Twelve patients undergoing radiotherapy were scanned using computed tomography (CT), magnetic resonance imaging (MRI) and contrast enhanced MR angiography (CEMRA). 3D patient models were constructed using the CT and MRI data. The arterial vessel tree was constructed from the MRA images using the ‘graph-cut’ method, combining information from Frangi vesselness filtering and region growing, and the results were validated against manually placed markers in/outside the vessels. Patient specific HTP was performed and the change in thermal distribution prediction caused by arterial cooling was evaluated by adding discrete vasculature (DIVA) modeling to the Pennes bioheat equation (PBHE). Results: Inclusion of arterial cooling showed a relevant impact, i.e., DIVA modeling predicts a decreased treatment quality by on average 0.19 °C (T90), 0.32 °C (T50) and 0.35 °C (T20) that is robust against variations in the inflow blood rate (|ΔT| 0.5 °C) were observed. Conclusion: Addition of patient-specific DIVA into the thermal modeling can significantly change predicted treatment quality. In cases where clinically detectable vessels pass the heated region, we advise to perform DIVA modeling
The Spectacle of Crime, Digitized
International audienceOne of the most significant features of the television series CSI: Crime Scene Investigationis its central preoccupation – forensic evidence – and the profession practised by its major characters – forensic science. Scientific inscriptions consistently allow the crime scene investigators (CSIs) to determine 'evidence' and 'truths' that otherwise elude them. At the same time, the dazzling digital effects used to punctuate key moments in each episode inevitably reference scientific technologies and the knowledge about reality that these promise. The success of the CSIs in every episode is premised upon knowledge guaranteed by scientific inscriptions and is itself an inscription of ways of seeing human bodies and the social body, represented by police scientists working to ensure public safety – a healthy social body. And it is also about how bodies, individual and social, are constituted as information, made knowable and validated by scientific instruments and procedures used to produce evidence
Thermal characterization of phantoms used for quality assurance of deep hyperthermia systems
Tissue mimicking phantoms are frequently used in hyperthermia applications for device and protocol optimization. Unfortunately, a commonly experienced limitation is that their precise thermal properties are not available. Therefore, in this study, the thermal properties of three currently used QA phantoms for deep hyperthermia are measured with an ‘’off-shelf’’ commercial thermal property analyzer. We have measured averaged values of thermal conductivity (k = 0.59 ± 0.07 Wm−1K−1), volumetric heat capacity (C = 3.85 ± 0.45 MJm−3K−1) and thermal diffusivity (D = 0.16 ± 0.02 mm2s−1). These values are comparable with reported values of internal organs, such as liver, kidney and muscle. In addition, a sensitivity study of the performance of the commercial sensor is conducted. To ensure correct thermal measurements, the sample under test should entirely cover the length of the sensor, and a minimum of 4 mm of material parallel to the sensor in all directions should be guaranteed
The potential of time-multiplexed steering by temperature optimization in microwave hyperthermia
Introduction: In clinical practice at Erasmus MC, the target-to-hotspot-quotient (THQ) of the specific absorption rate (SAR) is used to optimize phases and amplitudes of the signals to be applied to the hyperthermia applicator [1]. Recent research showed that the ratio between tumor and healthy tissue temperatures can be increased when amplitudes and phases are time-multiplexed when applying SAR optimization [2]. However, direct temperature optimization achieves higher tumor temperatures when considering time-multiplexed antenna steering [3]. In this work, we investigated the benefit of time-multiplexed steering when applying temperature optimization in models of patients with tumors on the head and neck region. Methods: For five patients with a tumor in the head and neck region, a Sim4Life model was created and treatment planning was applied for the HyperCollar3D. A single distribution SAR based THQ optimization was performed for reference. A novel temperature optimization scheme was developed, which optimizes the tumor temperature for the first 15 minutes of the treatment. This results in higher tumor temperatures throughout the treatment by explicitly including the transient effects in the optimization. The evaluation was based on simulations of the full treatment time of 75 minutes, with the total power scaled to reach maximum 43°C in the tumor. Performance was evaluated by comparing T50 for both healthy and tumor tissue during treatment. Results: The ratio between T50 in the healthy and tumor tissue was improved when using the novel temperature-based optimization for time-multiplexed distributions (Figure 1C). The SAR THQ showed a lower ratio for the time-multiplexed solution, this is resolved in the temperature simulations (Figure 2). Conclusion/Discussion: The resulting T50 values, show that the temperatures during treatment might benefit from the temperature optimized with the multiplexed steering approach: either the temperature in the tumor tissue can be higher or the temperature in healthy tissue could remain lower. Although the approach seems beneficial, assessment of the impact of uncertainties in thermal parameters and inclusion of a larger dataset is still required to assess the significance of the improvement and the expected clinical benefit [4]
Spatially selective nucleation of metal clusters on the tobacco mosaic virus
Tobacco mosaic virus (TMV) is a very stable nanotube complex of a
helical RNA and 2130 coat proteins. The special shape makes it an
interesting nano-object, especially as a template for chemical
reactions. Here we use TMV as a chemically functionalized template for
binding metal ions. Different chemical groups of the coat protein can
be used as ligands or to electrostatically bind metal ions. Following
this activation step, chemical reduction and electroless plating
produces metal clusters of several nanometers in diameter. The clusters
are attached to the virion without destroying its structure. Gold
clusters generated from an ascorbic acid bath bind to the exterior
surface as well as to the central channel of the hollow tube. Very high
selectivity is reached by tuning Pd-II and Pt-II activations with
phosphate: When TMV is first activated with Pd-II, and thereafter
metallized with a nickel-phosphinate bath, 3 nm nickel clusters grow in
the central channel; when TMV from phosphate-buffered suspensions is
employed, larger nickel clusters grow on the exterior surface.
Phosphate buffers have to be avoided when 3 nm nickel and cobalt wires
of several 100 nm in length are synthesized from borane-based baths
inside the TMV channel. The results are discussed with respect to the
inorganic complex chemistry of precursor molecules and the distribution
of binding sites in TMV