Structural and electrical studies on zinc added magnesium oxide nanoparticles

Magnesium oxide (MgO, pure) and zinc added MgO nanoparticles were synthesised by a simple microwave assisted solvothermal method. The concentrations of impurity used in the present work were 0.25 M and 0.50 M. All samples were annealed at 400°C for 1 h to improve the ordering. The prepared pure and zinc added magnesium oxide nanoparticles were characterised by powder X-ray diffraction (PXRD), energy dispersive spectroscopy (EDS) and scanning electron microscopy (SEM). PXRD studies of pure and zinc added MgO nanoparticles showed that all samples belong to crystalline nature with cubic structure. The grain size of all samples were determined from the XRD results and it belongs to nano meter scale. The EDS confirmed the presence of zinc, magnesium and oxide elements in the respective prepared samples. The scanning electron microscope images confirmed that the prepared samples possess nanometer dimensions. The electrical properties such as AC conductivity, dielectric constant and dielectric loss were measured at different temperatures in the different frequency range by involving the impedance analyser of all the prepared samples.</jats:p

Structural, optical, second harmonic, and mechanical studies on zinc chloride added alpha-glycine crystals

The slow evaporation solution method was employed to synthesize and crystallize zinc chloride doped α-glycine (ZCAG) single crystals. The single crystal X-ray diffraction studies of pure α-glycine single crystals revealed that the structure belong to primitive monoclinic lattice. Powder X-ray diffraction studies of ZCAG showed the well-defined sharp peaks and formation of centrosymmetric structure with space group P21/n. The increase in lattice volume of ZCAG suggested that the access of zinc chloride into the α-glycine crystal and the entry of zinc chloride to the α-glycine crystal was also established from the energy-dispersive X-ray analysis. Fourier transform infrared spectrum of ZCAG revealed that the functional groups of α-glycine was not transformed due to the introduction of zinc chloride into the lattice. The optical transparency of ZCAG was observed in the UV–visible region, and it exhibited a superior transmittance in the visible region. Energy bandgap value was determined and found to changes while increasing the dopant concentration. An emission peak was observed in the violet region from the photoluminescence spectra. The centrosymmetric ZCAG exhibited second harmonic generation efficiency of 1.44 times higher than standard potassium dihydrogen phosphate, possibly due to local non-centrosymmetry in the lattice, which is further augmented by lattice distortion induced by the dopant. Low dielectric constant and loss of the grown ZCAG crystals showed the remarkable application of non-linear optical. The Meyer index indicates that the grown ZCAG are categorized as soft materials

X-Ray and Thermal Studies on ZnxMg1-x SO4.7H2O Crystals

Single crystals of pure and mixed ZnSO4.7H2O and MgSO4.7H2O crystals were grown by slow evaporation method. The grown crystals were characterized by x-ray diffraction, atomic absorption spectral analysis and thermal analysis. The lattice parameters were calculated by from the XRD data. Atomic absorption spectral analysis showed that the Mg and Zn atoms were present in the mixed crystals. The thermal analysis by TGA and DTA showed that the mixed crystals have higher thermal stability than the pure crystals

Thermal and mechanical studies of nanochitosan incorporated polymethyl methacrylate-based composite electrolytes

AbstractThe composite solid polymer electrolytes based on Polymethyl methacrylate–Lithium triflate with nanochitosan as inert nanofiller were prepared by membrane hot-press method. Nanochitosan was synthesized from shrimp shell. The obtained polymer membrane was subjected to X-ray diffraction and Fourier transform infrared spectroscopy to study the structural behavior. X-ray diffraction studies revealed that the incorporation of nanochitosan in the prepared polymer matrix enhanced the amorphous phase. The complexation behavior of the prepared electrolytes was analyzed by Fourier transform infrared spectroscopy. Thermogravimetric and differential scanning calorimetric studies were carried out to understand the thermal stability of the prepared polymer composite electrode. The incorporation of nanochitosan in the polymer matrix significantly reduces the crystalline temperature of polymethyl methacrylate which was confirmed by differential scanning calorimetric study. Universal testing studies were carried to know the mechanical stability of the prepared solid polymer electrolytes. The ionic conductivity of the prepared composite polymer electrolyte was carried out using electrochemical impedance spectroscopy from ambient to 120 °C.</jats:p