The influence of the Rashba effect.

International audienc

Quantifying Photon Recycling in Solar Cells and Light-Emitting Diodes: Absorption and Emission Are Always Key.

Photon recycling has received increased attention in recent years following its observation in halide perovskites. It has been shown to lower the effective bimolecular recombination rate and thus increase excitation densities within a material. Here we introduce a general framework to quantify photon recycling which can be applied to any material. We apply our model to idealized solar cells and light-emitting diodes based on halide perovskites. By varying controllable parameters which affect photon recycling, namely, thickness, charge trapping rate, nonideal transmission at interfaces, and absorptance, we quantify the effect of each on photon recycling. In both device types, we demonstrate that maximizing absorption and emission processes remains paramount for optimizing devices, even if this is at the expense of photon recycling. Our results provide new insight into quantifying photon recycling in optoelectronic devices and demonstrate that photon recycling cannot always be seen as a beneficial process.ARB acknowledges funding from a Winton Studentship, Oppenheimer Studentship and the Engineering and Physical Sciences Research Council (EPSRC) Doctoral Training Centre in Photovoltaics (CDT-PV). MA acknowledges funding from the Marie Skłodowska-Curie actions (grant agreement No. 841386) under the European Union’s Horizon 2020 research and innovation programme. SDS acknowledges the Royal Society and Tata Group (UF150033). We thank Luis Pazos-Outón for supplying data for MAPbI3 solar cells. This work was supported by EPSRC grant EP/S030638/1

Formation of thin films of organic-inorganic perovskites for high-efficiency solar cells

Organic-inorganic perovskites are currently one of the hottest topics in photovoltaic (PV) research, with power conversion efficiencies (PCEs) of cells on a laboratory scale already competing with those of established thin-film PV technologies. Most enhancements have been achieved by improving the quality of the perovskite films, suggesting that the optimization of film formation and crystallization is of paramount importance for further advances. Here, we review the various techniques for film formation and the role of the solvents and precursors in the processes. We address the role chloride ions play in film formation of mixed-halide perovskites, which is an outstanding question in the field. We highlight the material properties that are essential for high-efficiency operation of solar cells, and identify how further improved morphologies might be achieved

Critical Assessment of the Use of Excess Lead Iodide in Lead Halide Perovskite Solar Cells.

It is common practice in the lead halide perovskite solar cell field to add a small molar excess of lead iodide (PbI2) to the precursor solution to increase the device performance. However, recent reports have shown that an excess of PbI2 can accelerate performance loss. In addition, PbI2 is photoactive (band gap ∼2.3 eV), which may lead to parasitic absorption losses in a solar cell. Here we show that devices using small quantities of excess PbI2 exhibit better device performance as compared with stoichiometric devices, both initially and for the duration of a stability test under operating conditions, primarily by enhancing the charge extraction. However, the photolysis of PbI2 negates the beneficial effect on charge extraction by leaving voids in the perovskite film and introduces trap states that are detrimental for device performance. We propose that although excess PbI2 provides a good template for enhanced performance, the community must continue to seek other additives or synthesis routes that fulfill the same beneficial role as excess PbI2, but without the photolysis that negates these beneficial effects under long-term device operation

Multi-source vacuum deposition of methylammonium-free perovskite solar cells

Halide perovskites of the form ABX3 have shown outstanding properties for solar cells. The highest reported compositions consist of mixtures of A-site cations methylammonium (MA), formamidinium (FA) and cesium and X-site iodide and bromide ions and are produced by solution processing. However, it is unclear whether solution processing will yield sufficient spatial performance uniformity for large-scale photovoltaic modules or compatibility with deposition of multi-layered tandem solar cell stacks. In addition, the volatile MA cation presents long-term stability issues. Here, we report the multi-source vacuum deposition of MA-free FA0.7Cs0.3Pb(I0.9Br0.1)3 perovskite thin films with high-quality morphological, structural and optoelectronic properties. We find that the controlled addition of excess PbI2 during the deposition is critical for achieving high performance and stability of the absorber material, and we fabricate p-i-n solar cells with stabilized power output of 18.2%. We also reveal the sensitivity of the deposition process to a range of parameters including substrate, annealing temperature, evaporation rates and source purity, providing a guide for further evaporation efforts. Our results demonstrate the enormous promise for MA-free perovskite solar cells employing industry-scalable multi-source evaporation processes.S.D.S. and M.A. acknowledge funding from the European Research Council (ERC) (grant agreement No. 756962 [HYPERION]) and the Marie Skłodowska-Curie actions (grant agreement No. 841386) under the European Union’s Horizon 2020 research and innovation programme. S.D.S acknowledges support from the Royal Society and Tata Group (UF150033). Y.-H. C. acknowledges funding from a Taiwan Cambridge Scholarship. Part of this work was undertaken using equipment facilities provided by the Henry Royce Institute, via the grant: Henry Royce Institute, Cambridge Equipment: EP/P024947/1. The authors acknowledge the Engineering and Physical Research Council (EPSRC) for funding (EP/R023980/1). We thank Tiarnan Doherty and Tim van de Goor for useful discussions

Reversible Removal of Intermixed Shallow States by Light Soaking in Multication Mixed Halide Perovskite Films.

The highest reported efficiencies of metal halide perovskite (MHP) solar cells are all based on mixed perovskites, such as (FA,MA,Cs)Pb(I1-x Br x )3. Despite demonstrated structural changes induced by light soaking, it is unclear how the charge carrier dynamics are affected across this entire material family. Here, various (FA,MA,Cs)Pb(I1-x Br x )3 perovskite films are light-soaked in nitrogen, and changes in optoelectronic properties are investigated through time-resolved microwave conductivity (TRMC) and optical and structural techniques. To fit the TRMC decay kinetics obtained for pristine (FA,MA,Cs)Pb(I1-x Br x )3 for various excitation densities, additional shallow states have to be included, which are not required for describing TRMC traces of single-cation MHPs. These shallow states can, independently of x, be removed by light soaking, which leads to a reduction in the imbalance between the diffusional motion of electrons and holes. We interpret the shallow states as a result of initially well-intermixed halide distributions, which upon light soaking segregate into domains with distinct band gaps.Z.A.-G. acknowledges funding from a Winton Studentship and ICON Studentship from the Lloyd’s Register Foundation. M.A.-J. thanks Cambridge Materials Limited and EPSRC (Grant Number EP/M005143/1) for their funding and technical support. S.D.S. acknowledges the Royal Society and Tata Group (UF150033) for funding

Spatially resolved photoluminescence analysis of Se passivation and defect formation in CdSex_{x}Te1−x_{1-x} thin films

CdTe is the most commercially successful thin-film photovoltaic technology to date. The recent development of Se-alloyed CdSe$_{x}$Te$_{1-x}$ layers in CdTe solar cells has led to higher device efficiencies, due to a lowered bandgap improving the photocurrent, improved voltage characteristics and longer carrier lifetimes. Evidence from cross-sectional electron microscopy is widely believed to indicate that Se passivates defects in CdSe$_{x}$Te$_{1-x}$ solar cells, and that this is the reason for better lifetimes and voltages in these devices. Here, we utilise spatially resolved photoluminescence measurements of CdSe$_{x}$Te$_{1-x}$ thin films on glass to study the effects of Se on carrier recombination in the material, isolated from the impact of conductive interfaces and without the need to prepare cross-sections through the samples. We find further evidence to support Se passivation of grain boundaries, but also identify an associated increase in below-bandgap photoluminescence that indicates the presence of Se-enhanced luminescent defects. Our results show that Se treatment, in tandem with Cl passivation, does increase radiative efficiencies. However, the simultaneous enhancement of defects within the grain interiors suggests that although it is overall beneficial, Se incorporation may still ultimately limit the maximum attainable efficiency of CdSe$_{x}$Te$_{1-x}$ solar cells

Halide Perovskite Light‐Emitting Diode Technologies

Funder: European Research Council; Id: http://dx.doi.org/10.13039/501100000781Abstract: Halide perovskites have attracted considerable attention in next‐generation solid‐state lighting and displays owing to their outstanding optoelectronic properties. Over the past few years, perovskite light‐emitting diodes (LEDs) have achieved high external quantum efficiencies of >20% with active layers showing photoluminescence quantum efficiencies close to unity. This paper reviews the historical breakthroughs and recent advancements in perovskite LEDs with near‐infrared, red, green, and blue emission colors. Critical challenges, including device stability and material toxicity, are discussed. Finally, an outlook on white emission and lasing applications based on perovskite materials is presented