A Comparison of Functional Models for Use in the Function-Failure Design Method

When failure analysis and prevention, guided by historical design knowledge, are coupled with product design at its conception, shorter design cycles are possible. By decreasing the design time of a product in this manner, design costs are reduced and the product will better suit the customer s needs. Prior work indicates that similar failure modes occur with products (or components) with similar functionality. To capitalize on this finding, a knowledge base of historical failure information linked to functionality is assembled for use by designers. One possible use for this knowledge base is within the Elemental Function-Failure Design Method (EFDM). This design methodology and failure analysis tool begins at conceptual design and keeps the designer cognizant of failures that are likely to occur based on the product s functionality. The EFDM offers potential improvement over current failure analysis methods, such as FMEA, FMECA, and Fault Tree Analysis, because it can be implemented hand in hand with other conceptual design steps and carried throughout a product s design cycle. These other failure analysis methods can only truly be effective after a physical design has been completed. The EFDM however is only as good as the knowledge base that it draws from, and therefore it is of utmost importance to develop a knowledge base that will be suitable for use across a wide spectrum of products. One fundamental question that arises in using the EFDM is: At what level of detail should functional descriptions of components be encoded? This paper explores two approaches to populating a knowledge base with actual failure occurrence information from Bell 206 helicopters. Functional models expressed at various levels of detail are investigated to determine the necessary detail for an applicable knowledge base that can be used by designers in both new designs as well as redesigns. High level and more detailed functional descriptions are derived for each failed component based on NTSB accident reports. To best record this data, standardized functional and failure mode vocabularies are used. Two separate function-failure knowledge bases are then created aid compared. Results indicate that encoding failure data using more detailed functional models allows for a more robust knowledge base. Interestingly however, when applying the EFDM, high level descriptions continue to produce useful results when using the knowledge base generated from the detailed functional models

Emerging new practices in technology to support independent community access for people with intellectual and cognitive disabilities

This is the published version, also available here: http://dx.doi.org/10.3233/NRE-2011-0654.The concept of community access is a multidimensional term, which may involve issues related to physical access, knowledge and information, power and control, relationships and communications, advocacy, participation and quality of life [21]. This paper discusses historical and emerging practices and interventions related to physical access to community and community based information for individuals with cognitive disabilities such as intellectual disability, autism or traumatic brain injury. While much societal attention has been paid to features of independent community access for populations such as individuals with hearing, vision or physical disabilities, less attention has focused on independent community access for people with intellectual and other significant cognitive disabilities. Attitudes and actions by families and professional service communities are often mixed for some individuals in this population. The somewhat limited research base in these areas is explored, including a case study review and results from several promising feasibility studies. The paper concludes with comments concerning future prospects and recommendations for improving independent community access for persons with significant cognitiv

Self-directed career preference selection for individuals with intellectual disabilities: Using computer technology to enhance self-determination

This is the published version. Copyright 2003 IOS Press.Objectives: To conduct a preliminary study investigating the application of a self-directed video and audio software program to assist individuals with intellectual disabilities to express their vocational job preferences. A working software prototype, called WorkSight, was developed and field tested. Study design: The effectiveness of theWorkSight approach was assessed by comparing it to currently used career assessment tools via ratings by educators and agency professionals. WorkSight was also tested in terms of its efficacy to match the job preferences that were predicted by the same educators and agency professionals. A total of 25 adults with intellectual disabilities participated in this study. Results: Adults with intellectual disabilities were able to use the computer-based job preference assessment to determine career and job priorities. Conclusions: The use of technology providing multimedia-based work information has promise to enable persons with intellectual disabilities to express preferences and to improve job placement and matching activities

Technology use by people with intellectual and developmental disabilities to support employment activities: A single-subject design meta analysis

This is the published version. Copyright 2006 IOS PressObjectives: Technology has the potential to improve employment and rehabilitation related outcomes for persons with disabilities. The purpose of this study was to examine the impact of technology use on employment-related outcomes for people with intellectual and developmental disabilities. Study design: A comprehensive search of the literature pertaining to technology use by people with intellectual disabilities was conducted, and a single-subject design meta analysis was conducted for a subset of those studies, which focused on employment and rehabilitation related outcomes. Results: The use of technology to promote outcomes in this area was shown to be generally effective, in particular when universal design features were addressed. Conclusions: Technology has the potential to enable people with intellectual and developmental disabilities to achieve more positive employment and rehabilitation outcomes. It is important to focus on universal design features important to persons with cognitive disabilities, and there is a need for more research in this area

Subsurface Geometry of the San Andreas Fault in Southern California: Results from the Salton Seismic Imaging Project (SSIP) and Strong Ground Motion Expectations

The San Andreas fault (SAF) is one of the most studied strike‐slip faults in the world; yet its subsurface geometry is still uncertain in most locations. The Salton Seismic Imaging Project (SSIP) was undertaken to image the structure surrounding the SAF and also its subsurface geometry. We present SSIP studies at two locations in the Coachella Valley of the northern Salton trough. On our line 4, a fault‐crossing profile just north of the Salton Sea, sedimentary basin depth reaches 4 km southwest of the SAF. On our line 6, a fault‐crossing profile at the north end of the Coachella Valley, sedimentary basin depth is ∼2–3  km and centered on the central, most active trace of the SAF. Subsurface geometry of the SAF and nearby faults along these two lines is determined using a new method of seismic‐reflection imaging, combined with potential‐field studies and earthquakes. Below a 6–9 km depth range, the SAF dips ∼50°–60° NE, and above this depth range it dips more steeply. Nearby faults are also imaged in the upper 10 km, many of which dip steeply and project to mapped surface fault traces. These secondary faults may join the SAF at depths below about 10 km to form a flower‐like structure. In Appendix D, we show that rupture on a northeast‐dipping SAF, using a single plane that approximates the two dips seen in our study, produces shaking that differs from shaking calculated for the Great California ShakeOut, for which the southern SAF was modeled as vertical in most places: shorter‐period (T<1  s) shaking is increased locally by up to a factor of 2 on the hanging wall and is decreased locally by up to a factor of 2 on the footwall, compared to shaking calculated for a vertical fault