Provisional specification for satellite time in a geomagnetic environment

Satellites in geosynchronous orbit were experiencing operational anomalies. These anomalies are believed to be due to the environment charging the spacecraft surfaces to a point where discharges occur. In designing future satellites for long term operation at geosynchronous altitude, it is important that designers have a specification that will give the total time per year, the particle flux density and particle energies that their satellites can be expected to encounter in these substorm environmental conditions. The limited data currently available on the environmental conditions are used to generate the provisional specification given in this report

Eroding ribbon thermocouples: impulse response and transient heat flux analysis

We have investigated a particular type of fast-response surface thermocouple to determine if it is appropriate to use a one dimensional transient heat conduction model to derive the transient surface heat flux from the measurements of surface temperature. With these sensors, low thermal inertia thermocouple junctions are formed near the surface by abrasive wear. Using laser excitation, we obtained the impulse response of these commercially available devices. The response of particular sensors can vary if new junctions are created by abrasive wear. Furthermore, the response of these sensors was found to deviate substantially from the one dimensional model and varied from sensor to sensor. The impulse response was simulated with greater fidelity using a two dimensional finite element model, but three dimensional effects also appear to be significant. The impact of these variations on the derived heat flux is assessed for the case of measurements in an internal combustion engine. When the measured impulse response is used to derive the surface heat flux, the apparent reversal of heat flux during the expansion stroke does not occur

A simple model for DSS-14 outage times

A model is proposed to describe DSS-14 outage times. Discrepancy Reporting System outage data for the period from January 1986 through September 1988 are used to estimate the parameters of the model. The model provides a probability distribution for the duration of outages, which agrees well with observed data. The model depends only on a small number of parameters, and has some heuristic justification. This shows that the Discrepancy Reporting System in the Deep Space Network (DSN) can be used to estimate the probability of extended outages in spite of the discrepancy reports ending when the pass ends. The probability of an outage extending beyond the end of a pass is estimated as around 5 percent

Provisional specification for satellite time in a geomagnetic substorm environment

Satellites in geosynchronous orbit have been experiencing operational anomalies. These anomalies are believed to be due to the environment charging the spacecraft surfaces to a point where discharges occur. In designing future satellites for long term operation at geosynchronous altitude, it is important that designers have a specification that will give the total time per year, the particle flux density, and particle energies that their satellites can be expected to encounter in these substorm environmental conditions. The limited data currently available on the environmental conditions was used to generate the provisional specification given

Orthotic management of cerebral palsy : recommendations from a consensus conference

An international multidisciplinary group of healthcare professionals and researchers participated in a consensus conference on the management of cerebral palsy, convened by the International Society for Prosthetics and Orthotics. Participants reviewed the evidence and considered contemporary thinking on a range of treatment options including physical and occupational therapy, and medical, surgical and orthotic interventions. The quality of many of the reviewed papers was compromised by inadequate reporting and lack of transparency, in particular regarding the types of patients and the design of the interventions being evaluated. Substantial evidence suggests that ankle-foot orthoses (AFOs) that control the foot and ankle in stance and swing phases can improve gait efficiency in ambulant children (GMFCS levels I-III). By contrast, little high quality evidence exists to support the use of orthoses for the hip, spine or upper limb. Where the evidence for orthosis use was not compelling consensus was reached on recommendations for orthotic intervention. Subsequent group discussions identified recommendations for future research. The evidence to support using orthoses is generally limited by the brevity of follow-up periods in research studies; hence the extent to which orthoses may prevent deformities developing over time remains unclear. The full report of the conference can be accessed free of charge at www.ispoint.org

SigTree: A Microbial Community Analysis Tool to Identify and Visualize Significantly Responsive Branches in a Phylogenetic Tree.

Microbial community analysis experiments to assess the effect of a treatment intervention (or environmental change) on the relative abundance levels of multiple related microbial species (or operational taxonomic units) simultaneously using high throughput genomics are becoming increasingly common. Within the framework of the evolutionary phylogeny of all species considered in the experiment, this translates to a statistical need to identify the phylogenetic branches that exhibit a significant consensus response (in terms of operational taxonomic unit abundance) to the intervention. We present the R software package SigTree, a collection of flexible tools that make use of meta-analysis methods and regular expressions to identify and visualize significantly responsive branches in a phylogenetic tree, while appropriately adjusting for multiple comparisons

Rural environmental concern: Effects of position, partisanship and place

The social bases of environmental concern in rural America resemble those for the nation as a whole, but also reflect the influence of place. Some general place characteristics, such as rates of population growth or resource-industry employment, predict responses across a number of environmental issues. Other unique or distinctive aspects of local society and environment matter as well. We extend earlier work on both kinds of place effects, first by analyzing survey data from northeast Oregon. Results emphasize that “environmental concern” has several dimensions. Second, we contextualize the Oregon results using surveys from other regions. Analysis of an integrated dataset (up to 12,000 interviews in 38 U.S. counties) shows effects from respondent characteristics and political views, and from county rates of population growth and resource-based employment. There also are significant place-to-place variations that are not explained by variables in the models. To understand some of these we return to the local scale. In northeast Oregon, residents describe how perceptions of fire danger from unmanaged forest lands shape their response to the word conservation. Their local interpretation contrasts with more general and urban connotations of this term, underlining the importance of place for understanding rural environmental concern

A flight investigation of performance and loads for a helicopter with 10-64C main rotor blade sections

A flight investigation produced data on performance and rotor loads for a teetering rotor, AH-1G helicopter flown with a main rotor that had the NLR-1T airfoil as the blade section contour. The test envelope included hover, forward flight speeds from 34 to 83 m/sec (65 to 162 knots), and collective fixed maneuvers at about 0.25 tip speed ratio. The data set for each test point describes vehicle flight state, control positions, rotor loads, power requirements, and blade motions. Rotor loads are reviewed primarily in terms of peak to peak and harmonic content. Lower frequency components predominated for most loads and generally increased with increased airspeed, but not necessarily with increased maneuver load factor. Detailed data for an advanced airfoil on an AH-1G are presented

Electrometer system measures nanoamps at high voltage

Floating electrometer eliminates major source of error since any leakage from electrometer case, which is at high voltage, appears only as load on high voltage supply and not as part of current being measured. Commands to and data from floating electrometer are transferred across high voltage interface by means of optical channels

A flight investigation of performance and loads for a helicopter with NLR-1T main-rotor blade sections

Data on performance and rotor loads for a teetering-rotor, AH-1G helicopter flown with a main rotor that had the NLR-1T airfoil as the blade-section contour are presented. The test envelope included hover, forward-flight speed sweeps from 35 to 85 m/sec, and collective-fixed maneuvers at about 0.25 tip-speed ratio. The data set for each test point described vehicle flight state, control positions, rotor loads, power requirements, and blade motions. Rotor loads are reviewed primarily in terms of peak-to-peak and harmonic content. Lower frequency components predominated for most loads and generally increased with increased airspeed, but not necessarily with increased maneuver load factor