Characterization of commercial synthetic resins by pyrolysis-gas chromatography/mass spectrometry : application to modern art and conservation

To characterize a set of synthetic resins, a methodology by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) has been developed. The studied reference materials were commercial versions of a wide range of synthetic resins. For each polymer, the pyrolytic and chromatographic conditions were optimized to adequately resolve the fragment mixture in a short time. The proposed analytical method does not require previous treatment of the sample, and due to its high sensitivity, only a small sample quantity in the microgram range can be used. The pyrolysis temperature was found to have little effect on the obtained pyrograms. The summarized data set for the individual polymer materials, especially the characteristic fragments with a structure close to the monomeric unit, was useful to identify commercial synthetic resins. These materials were used in the art and conservation field, as binding media, paint additives, painting varnishes, coatings, or consolidants. Two case studies are introduced where direct Py-GC/MS and thermally assisted hydrolysis and methylation GC/MS were applied on art objects: first, a modern gluing material of a medieval reverse glass painting, and the second example, the binding medium of a painting by Georg Baselitz (“Senta”, 1992/1993) from the Sammlung Moderne Kunst at the Pinakothek der Moderne, MunichVersió editoria

Comparison of serum pools and oral fluid samples for detection of porcine circovirus type 2 by quantitative real-time PCR in finisher pigs

Abstract Background Porcine circovirus type 2 (PCV2) diagnostics in live pigs often involves pooled serum and/or oral fluid samples for group-level determination of viral load by quantitative real-time polymerase chain reaction (qPCR). The purpose of the study was to compare the PCV2 viral load determined by qPCR of paired samples at the pen level of pools of sera (SP) from 4 to 5 pigs and the collective oral fluid (OF) from around 30 pigs corresponding to one rope put in the same pen. Pigs in pens of 2 finishing herds were sampled by cross-sectional (Herd 1) and cross-sectional with follow-up (Herd 2) study designs. In Herd 1, 50 sample pairs consisting of SP from 4 to 5 pigs and OF from around 23 pigs were collected. In Herd 2, 65 sample pairs consisting of 4 (SP) and around 30 (OF) pigs were collected 4 times at 3-week intervals. Results A higher proportion of PCV2-positive pens (86% vs. 80% and 100% vs. 91%) and higher viral loads (mean difference: 2.10 and 1.83 log(10) PCV2 copies per ml) were found in OF versus SP in both herds. The OF cut-off value corresponding to a positive SP (>3 log(10) PCV2 copies per ml) was estimated to 6.5 and 7.36 log(10) PCV2 copies per ml for Herds 1 and 2, respectively. Significant correlations between SP and OF results were found in Herd 1 (rho = 0.69) and the first sampling in Herd 2 (rho = 0.39), but not for the subsequent consecutive 3 samplings in Herd 2. Conclusions The proportion and viral loads of PCV2 positive pens were higher in collective OF (including up to 30 pigs) compared to SP (including 4–5 pigs) of the same pens. Also, OF seemed to detect the PCV2 infection earlier with OF values just below 6.5 (Herd 1) and 7.36 (Herd 2) log(10) being associated with a negative SP for the same pen. Nevertheless, a statistically significant correlation between SP and OF could not be found for all sampling time points, probably due to a high within-pen variation in individual pig viral load becoming very evident in SP of only four or five pigs. Consequently, the results imply that OF is well suited for detecting presence of PCV2 but less so for determining the specific viral load of pigs in a pen

Guidance on the Selection of Appropriate Indicators for Quantification of Antimicrobial Usage in Humans and Animals

An increasing variety of indicators of antimicrobial usage has become available in human and veterinary medicine, with no consensus on the most appropriate indicators to be used. The objective of this review is therefore to provide guidance on the selection of indicators, intended for those aiming to quantify antimicrobial usage based on sales, deliveries or reimbursement data. Depending on the study objective, different requirements apply to antimicrobial usage quantification in terms of resolution, comprehensiveness, stability over time, ability to assess exposure and comparability. If the aim is to monitor antimicrobial usage trends, it is crucial to use a robust quantification system that allows stability over time in terms of required data and provided output; to compare usage between different species or countries, comparability must be ensured between the different populations. If data are used for benchmarking, the system comprehensiveness is particularly crucial, while data collected to study the association between usage and resistance should express the exposure level and duration as a measurement of the exerted selection pressure. Antimicrobial usage is generally described as the number of technical units consumed normalized by the population at risk of being treated in a defined period. The technical units vary from number of packages to number of individuals treated daily by adding different levels of complexity such as daily dose or weight at treatment. These technical units are then related to a description of the population at risk, based either on biomass or number of individuals. Conventions and assumptions are needed for all of these calculation steps. However, there is a clear lack of standardization, resulting in poor transparency and comparability. By combining study requirements with available approaches to quantify antimicrobial usage, we provide suggestions on the most appropriate indicators and data sources to be used for a given study objective